Best Yj Lift Kit for Jeep Wrangler YJ

#1 · Best Overall

1. Rough Country 2.5-Inch Kit

• Material: Alloy Steel, Aluminum
• Material Type: Alloy Steel, Aluminum

Best for: Factory-ride YJ refresh.

Why it ranks #1: Designed for 1987–1995 YJs, it includes lifted front and rear leaf springs, four N3 shocks, hardware, and a transfer-case drop.

Double-tapered leaf springs pair with premium N3 shocks in this 2.5-inch kit for 1987–1995 Wrangler YJs. The lift adds ground clearance while leveling the front with the rear, giving owners a moderate stance change with components specified for both on-road and off-road use.

The double-tapered leaf springs are described as allowing more flex and distributing loads more evenly, which supports articulation and load handling rather than simply raising the body. Four N3 shocks are included for on- and off-road use, and the transfer-case drop is specified to maintain proper driveshaft angles and avoid vibration. With front and rear lifted springs, U-bolts, and hardware included, the package addresses both axles; Rough Country recommends certified installation and post-install checks.

Skip it if you want a lift taller than 2.5 inches; Rough Country’s 620N2 provides a listed 4-inch lift.

Choose this Rough Country kit for a 1987–1995 YJ owner seeking moderate clearance, a leveled stance, and a smooth factory-like ride. Its 2.5-inch height and certified-installation recommendation are important planning boundaries.

Listed on Amazon as: Rough Country 2.5" Suspension Lift Kit for 1987-1995 Jeep Wrangler YJ – 615.20

#2 · Best Mild Lift

2. BDS 2-Inch Kit

• Weight: 68.2 lb
• Material: Alloy Steel, Durable Coatings…
• Material Type: Alloy Steel, Durable Coatings…

Best for: Two-inch bolt-on suspension.

Why it ranks #2: This YJ-compatible complete kit has Glide-Ride leaf springs, track-bar relocation brackets, a transfer-case drop, and NX2 Nitro shocks.

Glide-Ride leaf springs and a stated 100% bolt-on installation distinguish this BDS 2-inch kit for 1987–1995 Jeep Wrangler YJs. It raises the suspension for tires up to 31 inches, while front and rear track-bar relocation brackets help recenter the axle after the lift.

BDS specifies Glide-Ride springs to provide full lift height and increased capacity, connecting the 2-inch rise with spring support rather than relying on spacers alone. Front and rear track-bar relocation brackets are included to center the axle, while a transfer-case drop eases driveline angles. Vehicle-specific valving in the NX2 Nitro shocks is intended to improve control. The package is described as 100% bolt-on, and the listed tire guidance extends up to 31 inches.

Skip it if you need room for tires up to 35 inches; BDS’s 6-inch YJ kit lists that tire capacity.

This BDS kit fits buyers seeking a modest 2-inch YJ lift with axle-centering brackets and bolt-on installation. Its listed tire limit is 31 inches, so larger-tire plans point beyond this package.

Listed on Amazon as: BDS408H | 2 in Full Suspension Lift Kit (Front & Rear) | Compatible with Jeep Wrangler YJ (87-95)

#3 · Best Power Steering Kit

See also  Best White & Gold Air Fryers: Top 10 Picks!

3. Rough Country 4-Inch Kit

• Weight: 173.7 lb
• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Four-inch power-steering YJ.

Why it ranks #3: Its 4-inch YJ lift includes a power-steering pitman arm, track-bar and brake-line brackets, sway-bar links, bumpstops, and four N3 shocks.

A 4-inch lift and power-steering pitman arm define this Rough Country kit for 1987–1995 Jeep Wrangler YJs. The taller suspension raises the off-road stance, while its component package includes steering and axle-related brackets alongside lifted leaf springs, making it a broad upgrade rather than a spring-only change.

The kit includes lifted leaf springs and four Premium N3 shocks, with Rough Country describing the shocks for on- and off-road performance and a smooth, factory-like ride. A transfer-case drop addresses driveshaft angles, while the pitman arm, extended sway-bar links, track-bar drop bracket, brake-line brackets, and bumpstops add related suspension hardware. The 4-inch height targets buyers seeking more articulation and a more pronounced stance; installation requires suspension knowledge and post-install checks.

Skip it if you prefer a lower lift; Rough Country’s 615.2 kit provides a 2.5-inch YJ suspension lift.

This suits a YJ owner seeking a taller off-road stance and a kit with steering and suspension brackets included. Account for the 4-inch lift and the manufacturer’s recommendation for knowledgeable, certified installation.

Listed on Amazon as: Rough Country 4" Lift Kit for 87-95 Jeep Wrangler YJ | Power Steering – 620N2

#4

4. maXpeedingrods 2.5-Inch Kit

• Weight: 84733 g

Best for: 2.5-inch clearance upgrade.

Why it ranks #4: This 1987–1995 YJ 4WD kit supplies lift springs, shocks, brackets, and installation hardware for a moderate 2.5-inch lift.

High-pressure nitrogen G1 shocks with preinstalled natural-rubber bushings accompany this 2.5-inch lift for 1987–1995 Jeep Wrangler YJ 4WD models. The added ground and tire clearance supports fitting larger custom rims and tires, while the listed shock construction covers both on-road and off-road use.

The 2.5-inch lift is specified to increase ground and tire clearance, giving owners room for larger custom rims and tires. G1 shocks use high-pressure nitrogen and arrive with natural-rubber bushings preinstalled, so the listed components combine suspension height with shock hardware for road and off-road use. Powder-coated shocks are identified as corrosion-resistant. The package also lists lift springs, struts, brackets, and installation hardware; its stated fitment is limited to 1987–1995 YJ 4WD models.

Skip it if you own a 2WD YJ; Supreme Suspensions lists compatibility with both 2WD and 4WD models.

Consider this kit if your 1987–1995 YJ is 4WD and you want 2.5 inches of clearance with included G1 shocks and springs. Its listed fitment does not cover 2WD models.

Listed on Amazon as: maXpeedingrods 2.5" Suspension Lift Kit for Jeep Wrangler YJ 1987-1995 4WD w/Shocks and Leaf Springs

#5

5. Skyjacker 4-Inch Kit

• Weight: 40 lb

Best for: Four-inch Softride lift.

Why it ranks #5: The YJ-specific kit provides 4 inches of front lift and 3–3.5 inches at the rear, with shocks and a stated maximum 33-by-12.5-inch tire size.

Skyjacker’s Softride kit specifies 4 inches of front lift and 3–3.5 inches at the rear for listed Wrangler Base, Laredo, and Sport applications. It includes shocks and gives buyers a stated maximum tire size of 33×12.5 inches for planning a taller suspension and tire combination.

The different front and rear lift figures—4 inches at the front and 3–3.5 inches at the rear—make the resulting stance an important fit consideration. Skyjacker identifies the package as a Softride front and rear suspension lift and lists shocks among the included components. The stated maximum tire size is 33×12.5 inches, offering a reference when selecting tires. The supplied fitment details name Wrangler Base, Laredo, and Sport, so buyers should use those listed applications when assessing suitability.

Skip it if you want equal front and rear lift; Rough Country’s 615.2 kit lists a 2.5-inch lift and levels front with rear.

This Skyjacker kit suits YJ owners planning a taller lift with shocks and tires up to the listed 33×12.5 inches. Its rear lift is lower than the front, a key stance consideration.

Listed on Amazon as: Skyjacker YJ41BKH-R Suspension Lift Kit w/Shock Frt/Rr Hydro Shocks 4 in. Lift Front/Rear Leaf Spring Suspension Lift Kit w/Shock

#6 · Highest Lift

6. BDS 6-Inch Kit

• Weight: 90.2 lb
• Material: Alloy Steel, Durable Coatings…
• Material Type: Alloy Steel, Durable Coatings…

Best for: Six-inch lift for larger tires.

Why it ranks #6: For a substantially taller YJ setup, this complete 6-inch kit includes leaf springs, a shackle kit, NX2 shocks, and a solid anti-sway-bar kit.

A 6-inch suspension lift and listed capacity for tires up to 35 inches make this BDS kit the tallest option here. It fits 1987–1995 Jeep Wrangler YJs and pairs Glide-Ride leaf springs with NX2 Nitro shocks to target a higher stance with suspension components intended for control.

BDS specifies Glide-Ride leaf springs for full lift height and increased capacity, while front and rear track-bar relocation brackets help center the axle after the 6-inch lift. A transfer-case drop eases driveline angles, and vehicle-specific valving in the NX2 Nitro shocks is intended to improve control. The kit also includes a front shackle kit and solid anti-sway-bar kit. Its stated tire capacity reaches 35 inches, making the taller setup relevant to larger-tire plans.

Skip it if you prefer a lower lift; BDS’s 2-inch kit is listed for tires up to 31 inches.

This BDS kit suits YJ owners planning a 6-inch lift and tires up to the stated 35-inch capacity. The substantial height makes stance and installation planning central considerations before choosing it.

Listed on Amazon as: BDS1432H | 6 Inch Full Suspension Lift Kit (Front & Rear) | NX2 Nitro Shocks | Compatible with Jeep Wrangler YJ (87-95)

#7

7. Zone 4-Inch Kit

Best for: Four-inch off-road stance.

Why it ranks #7: Listed for 1987–1995 Jeep YJ with power steering, this 4-inch option is relevant to buyers comparing a taller suspension lift.

The listed 4-inch lift with power steering fitment makes the Zone ZONJ28 a taller-rise option for 1987–1995 Jeep YJ owners. Zone Offroad emphasizes ground clearance, handling, and off-road use, positioning this kit for drivers prioritizing trail capability and a more elevated stance.

The title identifies a 4-inch lift and power-steering application, giving YJ shoppers a clear height and steering-related fitment reference. Zone Offroad’s supplied description emphasizes ground clearance and handling for off-road terrain, which aligns with buyers seeking a more capable trail stance. Its materials are characterized as heavy-duty, and the listing attributes engineering expertise to BDS Suspension. However, the provided component information identifies only the kit designation, so shoppers have limited component-level detail for installation planning.

Skip it if you need an itemized spring-and-shock package; Rough Country’s 620N2 lists its suspension components.

The ZONJ28 is for YJ owners pursuing a 4-inch off-road-oriented lift with power-steering fitment. Review the limited component details in the supplied listing when planning installation and confirming what the package includes.

Listed on Amazon as: ZONE ZONJ28 87-95 Compatible with jeep YJ 4in Lift(w/Power Steering)

#8

8. Tuff Country 2-Inch Kit

• Weight: 85 lb
• Material: Metal
• Material Type: Metal

Best for: Simple two-inch spring lift.

Why it ranks #8: The listing covers 1987–1996 Wranglers and specifies 2 inches front and rear with a maximum tire size of 32 by 10.50 inches; shocks are not included.

A two-inch lift at both the front and rear is the central specification of Tuff Country’s EZ-Ride kit for 1987–1996 Jeep Wrangler YJs. Its listed maximum tire size is 32 by 10.50 inches, giving buyers a clear height and tire-planning reference for a modest suspension change.

The matching 2-inch front and rear lift provides a straightforward height target for owners wanting to raise both ends without choosing between different listed axle heights. Tuff Country specifies a maximum tire size of 32×10.50 inches, useful when planning a tire change alongside the suspension. This EZ-Ride kit is explicitly listed without shocks, so buyers can plan around that component boundary. The stated model-year range extends through 1996, unlike kits limited to 1987–1995.

Skip it if you want shocks included; maXpeedingrods lists a YJ lift kit with shocks and leaf springs.

Choose this Tuff Country kit if you want a 2-inch front-and-rear lift and need the stated fitment through 1996. Plan separately for shocks, and keep the listed 32×10.50-inch maximum tire size in view.

Listed on Amazon as: Tuff Country 42800K 2" Lift Kit EZ-Ride with No Shocks Compatible with/Replacement for Jeep Wrangler YJ 1987-1996

#9

9. Supreme Suspensions Add-A-Leaf Kit

• Material: Spring Steel
• Material Type: Spring Steel

Best for: Add-a-leaf YJ leveling.

Why it ranks #9: This YJ add-a-leaf option offers a stated 1.5–2-inch rear lift depending on leaf-pack condition and includes spring-steel leaves and isolator pads.

Spring-steel add-a-leafs work with existing front and rear leaf packs in this Supreme Suspensions kit for 1987–1995 Jeep Wrangler YJs, including 2WD and 4WD. The specified 1.5–2-inch rear lift varies with leaf-pack condition, making this a way to supplement the existing springs rather than replace the whole suspension.

The kit includes four short spring-steel add-a-leafs, isolator pads, and high-grade alignment bolts, all intended to work with the existing leaf-spring packs. Supreme specifies a rear lift of 1.5–2 inches depending on pack condition, so the final height is not fixed. Its technical note calls for checking factory U-bolt thread: at least 1/2 inch must remain, or longer U-bolts are required. This measurement affects parts planning before installation.

Skip it if you need a fixed lift height; BDS’s 2-inch full suspension kit specifies a set lift height.

This kit fits YJ owners who want to add spring support while retaining their existing leaf packs. Account for variable rear lift and measure factory U-bolt thread before deciding whether longer bolts are needed.

Listed on Amazon as: Supreme Suspensions – 1.5-2" Front and Rear Lift Kit for 1987-1995 Jeep Wrangler YJ (2WD 4WD) High-Strength Steel Add-A-Leaf Helper Springs Suspension Lift Kit

#10

10. BST BSSP Add-A-Leaf Kit

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Front-and-rear add-a-leaf.

Why it ranks #10: Its front and rear YJ add-a-leaf springs provide about 1.5–2 inches depending on leaf-pack condition, with alignment pins and hardware included.

Four add-a-leaf springs cover both axles in this BST BSSP kit for 1987–1995 Jeep Wrangler YJs, with a listed 1.5–2 inches of lift. The package also includes extended alignment pins, hardware, and isolator pads, making it an add-on approach to adjusting the existing leaf packs.

The two front and two rear add-a-leafs provide the listed coverage for both ends, while the 1.5–2-inch lift varies with leaf-pack condition. Extended alignment pins, hardware, and isolator pads are included to support the spring installation. BST BSSP specifies that at least 1/2 inch of thread must remain on factory U-bolts, so checking that measurement helps determine whether the existing bolts can be used. The stated application is 1987–1995 YJ.

Skip it if you need a fixed lift height; BDS’s 2-inch full suspension kit specifies a set lift height.

Consider this kit if you want add-a-leaf coverage at both ends of a 1987–1995 YJ. Its lift depends on spring condition, and the specified U-bolt thread measurement is part of planning.

Listed on Amazon as: BST BSSP Front 1.5"-2" Rear 1.5"-2" Add A Leaf Lift Kit for 1987-1995 Jeep Wrangler YJ, Leaf Spring Leaf Pack Suspension Leveling Lift Kit