Best Lift Kit For Subaru Outback: Compare 10 Options

#1 · Best Overall

1. ReadyLIFT 69-90200

• Weight: 20 lb
• Material: Alloy Steel, Aluminum, or High Carbon Steel
• Material Type: Alloy Steel, Aluminum, or High Carbon Steel

Best for: 2020–2023 Outback owners.

Why it ranks #1: Made for 2020–2023 Outbacks, it specifies a 2-inch front and 1.5-inch rear lift, offset spacers for caster and camber, and front sway bar end links.

A 2-inch front lift paired with a 1.5-inch rear lift gives this ReadyLIFT kit a distinctly front-biased stance while adding clearance. Its Outback-specific fitment targets 2020–2023 AWD models, and the offset spacer design is intended to support correct caster and camber after lifting.

The easy bolt-on installation gives owners a straightforward path to the lift, while the included front sway bar end links address another part of the suspension setup. The 2-inch front and 1.5-inch rear heights provide a measured change rather than an equal lift at both ends. ReadyLIFT identifies this kit for 2020–2023 Outback AWD models, so its vehicle range is focused rather than spanning earlier generations.

Skip it if you own a 2015–2019 Outback; the ReadyLIFT 69-95200 is listed for those model years instead.

This suits owners of a 2020–2023 Outback AWD seeking a bolt-on lift with front end links and offset spacers. Its year range is specific, so it is not the ReadyLIFT choice for earlier Outback models.

Listed on Amazon as: ReadyLIFT 69-90200 2.0'' SST Lift Kit For Subaru Outback AWD

#2 · Best 2015–2019 Fit

2. ReadyLIFT 69-95200

• Material: Alloy Steel, Aluminum
• Material Type: Alloy Steel, Aluminum

Best for: 2015–2019 Outback tire clearance.

Why it ranks #2: Designed for 2015–2019 Outbacks, it gives a 2-inch front and 1.5-inch rear lift and lists tire fitment up to 245/65-17 on a specified wheel.

ReadyLIFT specifies room for up to a 245/65-17 tire on a 17×8 wheel with +38 offset, making this kit a targeted choice for Outback owners planning that tire setup. It adds 2 inches at the front and 1.5 inches at the rear, with upgraded sway bar end links included.

The stated tire-and-wheel combination gives buyers a concrete reference point when planning a larger setup, while the front and rear lift heights clarify the resulting stance. ReadyLIFT says its upgraded end links eliminate the relocation-bracket flex and compliance associated with the original OE sway bar mount system. The kit is listed for 2015–2019 Subaru Outback models, keeping fitment focused on that generation.

Skip it if you own a 2020–2023 Outback; ReadyLIFT 69-90200 is listed for those newer models.

This is a strong match for a 2015–2019 Outback owner who wants added clearance and a defined 245/65-17 tire target. The wheel width and offset matter to that stated tire allowance.

Listed on Amazon as: ReadyLIFT 69-95200 2.0'' SST Lift Kit w/End Links For Subaru Outback AWD

#3 · Tallest Listed Lift

3. Motortane Outback V Kit

• Material: Polyurethane (PU)
• Material Type: Polyurethane (PU)

See also  BEST Commercial Gas Rice Cookers: Top 10 Picks

Best for: 2014–2021 Outback V clearance.

Why it ranks #3: Listed for Outback V models from 2014–2021, it offers a 2.5-inch front and rear lift with polyurethane spacers and included bolt extensions.

A 2.5-inch front-and-rear lift gives the Motortane kit a clearly stated height target for Subaru Outback V models from 2014–2021. Its polyurethane spacers come with Easy-On bolt extensions, which the listing connects to installation without removing or compressing the spring.

The 2.5-inch lift is intended to add ground clearance for obstacle navigation, while the listing describes the kit as supporting off-road traction and stability. Its Easy-On bolt extensions and stated installation process using standard tools can simplify planning: the description says spring removal or compression is not required. The kit includes two front and two rear polyurethane spacers, making the supplied components clear for the front-and-rear lift.

Skip it if you own a 2015–2019 Outback and want a listed 245/65-17 tire allowance; ReadyLIFT 69-95200 specifies that setup.

This suits Outback V owners seeking a 2.5-inch lift and an installation process that avoids spring removal or compression. Its stated application is limited to 2014–2021 Outback V models.

Listed on Amazon as: Lift Kit for SUBARU OUTBACK V 2014-2021 2.5" 65mm Front & Rear Easy Mounting

#4 · Broadest Year Range

4. Tuff Country 51730

• Weight: 19 lb
• Material: Steel
• Material Type: Steel

Best for: Steel spacer lift for newer Outbacks.

Why it ranks #4: Its listing specifies compatibility with 2015–2022 Outbacks and a 2-inch lift, with steel construction and strut spacers included.

Steel strut spacers are the defining hardware in this Tuff Country kit, which is listed as a 2-inch lift for Subaru Outback models. That combination gives buyers a straightforward spacer-based option when their priority is added ride height rather than a feature-rich suspension package.

The listing identifies the kit as a 2-inch lift and specifies steel construction, giving buyers two concrete points for comparing spacer kits. Its included components are strut spacers, so the supplied information centers on a spacer-based lift rather than additional sway-bar or alignment hardware. The title lists 2015–2022 Outback fitment; that defined model range helps narrow the choice to the stated generation.

Skip it if you want a stated tire-size allowance and upgraded end links for a 2015–2019 Outback; ReadyLIFT 69-95200 lists both.

This fits an Outback owner seeking a 2-inch lift with steel strut spacers and a listed 2015–2022 range. The product details are sparse, so buyers wanting specified tire limits or added links should look elsewhere.

Listed on Amazon as: Tuff Country 51730 2" Lift Kit Compatible with/Replacement for Subaru Outback 2015-2022

#5

5. maXpeedingrods 2-Inch Kit

• Weight: 2800 g

Best for: 2010–2015 Subaru spacer lift.

Why it ranks #5: For 2010–2015 Legacy and Outback models, this kit provides a 2-inch front and rear lift using billet aluminum strut spacers.

A 2-inch lift at both ends gives this maXpeedingrods kit a clear, even-height target for listed 2010–2015 Subaru Legacy and Outback models. Its billet aluminum strut spacers are also listed for BRZ and Scion FRS applications, making the product range broader than an Outback-only kit.

The equal front and rear lift is intended to increase clearance and make room for larger tires and wheels, giving buyers a practical reason to choose the 2-inch height. The listing describes billet aluminum spacers as strong and durable, and says the setup maintains original ride quality. Its fitment spans several named models and year ranges, so check that the vehicle falls within the particular application listed.

Skip it if you own a 2015–2019 Outback and want upgraded sway bar end links; ReadyLIFT 69-95200 is listed for that generation.

This suits owners of a listed 2010–2015 Legacy or Outback who want an even 2-inch spacer lift and room for larger tires. Its model-year coverage does not extend to newer Outbacks.

Listed on Amazon as: maXpeedingrods 2" Front & Rear Lift Kit for Subaru Legacy/Outback 2010-2015, for Subaru BRZ 2013-2016, for Scion FRS 2013-2018, Aluminum Strut Spacers

#6 · Lowest Lift

6. DEALPAREX 30mm Kit

• Weight: 3.3 lb
• Material: Polyurethane (PU)
• Material Type: Polyurethane (PU)

Best for: Modest lift for broad Subaru fitment.

Why it ranks #6: Its listed Outback fitment covers 2009–2021 and the 1.2-inch lift is a smaller step than the 2- to 3-inch options.

The 1.2-inch, or 30 mm, lift keeps this DEALPAREX kit modest while adding ground clearance through polyurethane coil spring spacers. It is listed for Outback models from 2009–2021 and also covers specified Legacy and BRZ applications, offering a wide stated model range.

The kit includes two front and two rear strut spacers plus a fitting kit, giving buyers the listed core components for a four-corner installation. DEALPAREX says the polyurethane spacers increase ground clearance and allow custom rims and tires, tying the small lift to a practical fitment goal. Its 1.2-inch height is more restrained than the 2- and 3-inch options, which matters to buyers seeking a smaller change.

Skip it if you want a 2-inch front-and-rear lift for a 2010–2015 Outback; maXpeedingrods AP67WO specifies that height and fitment.

This is suited to Outback owners seeking a modest 1.2-inch increase and a stated 2009–2021 fitment range. Choose a taller kit if your priority is more lift than this spacer height provides.

Listed on Amazon as: Leveling Lift Kit 1.2 inch 30mm compatible with Subaru – Fits BRZ 2011-present, Legacy 2009-2021, Outback 2009-2021

#7

7. Wsays 3-Inch Spacers

• Material: Aluminum
• Material Type: Aluminum

Best for: 2005–2009 Outback lift.

Why it ranks #7: Made for 2005–2009 Outbacks, it lists a 3-inch front and rear lift and CNC billet 6061 aluminum, but notes an additional lower control arm bracket is needed.

This Wsays kit advertises up to 3 inches of front-and-rear lift for 2005–2009 Outback and Legacy models, using CNC-machined 6061 aluminum spacers. The stated lift amount is not the spacer thickness, a useful distinction when comparing the kit with other spacer-based options.

Wsays says the lift uses compound ratios, so spacer thickness does not equal the resulting lift height; that helps set expectations when reviewing the advertised 3-inch figure. Installation is described as a bolt-on process between the top strut hats, but the listing also calls for an additional lower control arm bracket. That extra component affects installation planning, and the description notes that other components may be required depending on the vehicle.

Skip it if you prefer a lift listing that identifies the included front and rear spacers without an added lower control arm bracket; WeiSen 70DA401037 lists four spacers.

This is aimed at 2005–2009 Outback and Legacy owners seeking a 3-inch lift from aluminum spacers. Plan for the specified lower control arm bracket, and remember the advertised lift is not spacer thickness.

Listed on Amazon as: Wsays 3" Shock Lift Suspension Extension Spacers For Outback Legacy

#8

8. WeiSen 3-Inch Kit

• Weight: 8 lb

Best for: Three-inch lift for early Outback.

Why it ranks #8: For 2000–2004 Outbacks, it specifies a 3-inch front and rear lift with 6061 aluminum spacers and includes front and rear strut spacers.

WeiSen’s 3-inch front-and-rear lift pairs a substantial height increase with 6061 aluminum spacers and a silver treatment described as corrosion resistant. The kit is listed for 2000–2004 Outback and Legacy models and 2003–2006 Baja models, with all-model fitment stated for those ranges.

The 3-inch lift is intended to increase ground clearance and make room for larger tires, connecting the height change to clearance and wheel options. WeiSen identifies 6061 aluminum as lightweight and resistant to deformation, while the silver treatment adds stated corrosion resistance. The package list specifies two front and two rear strut spacers, helping buyers understand the supplied hardware for the full front-and-rear setup.

Skip it if you own a 2000–2004 Outback and prefer a kit whose listing says it maintains original ride quality; maXpeedingrods XD10WD states that benefit.

This suits owners of 2000–2004 Outbacks seeking a 3-inch lift, more clearance, and room for larger tires. Its stated fitment is limited to early models, despite the broader Baja and Legacy applications.

Listed on Amazon as: WeiSen 3" Lift Kit Front & Rear Full Suspension Leveling Lift Kit Compatible with Subaru Outback/Legacy 2000-2004 Fit Subaru Baja 2003-2006 Billet 6061 Aluminum

#9

9. maXpeedingrods 3-Inch Kit

• Weight: 7.94 lb

Best for: Early Outback three-inch lift.

Why it ranks #9: This 3-inch front and rear kit fits 2000–2004 Outbacks and uses billet aluminum spacers; its listed fitment also includes Legacy and Baja models.

A full 3-inch lift at both the front and rear gives this maXpeedingrods kit a taller target than the 2-inch spacer options. It is listed for Subaru Outback and Legacy models from 2000–2004, as well as Subaru Baja models from 2003–2006, and uses billet aluminum spacers.

The equal 3-inch front and rear lift provides a clear height target for owners seeking additional room for larger tires and wheels, which the product description specifically identifies as a benefit. Billet aluminum spacers are presented as a strong, durable construction choice. The listing also says the spacers maintain original ride quality, giving comfort-conscious buyers a stated ride-quality consideration alongside the increased clearance.

Skip it if you own a 2000–2004 Outback and want the same lift with stated corrosion resistance; WeiSen 70DA401037 lists silver treatment.

This suits owners of early Outback or Legacy models seeking a 3-inch front-and-rear lift and space for larger wheels. Its listed vehicle years are narrow, so later Outback generations fall outside its stated range.

Listed on Amazon as: maXpeedingrods 3" Front & Rear Lift Kit for Subaru Outback/Legacy 2000-2004

#10

10. Tema4x4 40mm Kit

• Weight: 4.4 lb
• Material: Polyurethane
• Material Type: Polyurethane

Best for: 40 mm clearance for Subaru.

Why it ranks #10: The listing names Outback compatibility and a 40mm lift, but does not provide model-year fitment in the supplied details, making exact-year verification essential.

A stated 40 mm of added clearance makes this Tema4x4 kit a defined choice for Subaru owners who want more room over snow, dirt, and country roads. Its polyurethane strut spacers are listed for Legacy B4, Outback, Lancaster, and Baja applications, with compatibility details requiring vehicle-specific attention.

Tema4x4 says the 40 mm increase helps with higher curbs and uneven routes, while the added clearance can allow larger custom rims and tires. The kit uses polyurethane strut spacers, and the description says installation can be handled at a service shop or manually by someone with basic car-maintenance skills. Those details help buyers weigh the height gain against their installation approach and vehicle compatibility.

Skip it if you need a stated 2009–2021 Outback year range; DEALPAREX 80-15-001 + 80-15-009/30 lists those years.

This suits Subaru owners seeking a 40 mm lift for added clearance on snow, dirt, or country roads. Outback model years are not specified in the supplied listing, so its stated application lacks that detail.

Listed on Amazon as: (Front and Rear) Lift Kit 40mm That is compatible with Subaru LEGACY B4, OUTBACK, LANCASTER, BAJA