Best Crosstrek Lift Kit: Compare Fit, Lift Height, and Design

#1 · Best Overall

1. ReadyLIFT 69-98200

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: 2018–2024 owners seeking tire clearance.

Why it ranks #1: Lists a 2-inch front and 1.5-inch rear lift, offset spacer geometry, included end links, and tire-fit guidance for specified sizes.

A two-inch front lift paired with a 1.5-inch rear lift gives this ReadyLIFT kit its defining front-to-rear stance. It covers 2018–2024 Crosstrek models and lists clearance for 215/75-15 tires without rubbing, making the tire guidance especially concrete for buyers planning a larger setup.

The offset spacer design is specified to correct caster and camber, connecting the lift hardware to alignment geometry rather than simply added height. Easy bolt-on installation is another stated feature, while the supplied end links are included as part of the kit. The tire notes distinguish between 215/75-15 tires with no rub and 235/75-15 tires requiring minor plastic trimming, so shoppers can weigh the larger option against its extra bodywork step.

Skip it if you need a full two-inch rear lift; Rough Country 90300 lists a two-inch leveling kit for 2018–2020 Crosstrek 4WD.

This is a strong match for 2018–2024 owners who want a higher front lift, included end links, and specific tire-clearance guidance. Note the rear lift is 1.5 inches, and the largest listed tire option requires minor trimming.

Listed on Amazon as: ReadyLIFT 69-98200 2.0'' SST Lift Kit w/End Links For Subaru Crosstrek AWD

#2 · Best Leveling Kit

2. Rough Country 90300

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Factory-ride-conscious 2018–2020 owners.

Why it ranks #2: Targets compatible Crosstreks with a 2-inch leveling kit, includes front and rear strut extensions and sway bar brackets, and cites factory ride quality.

Front and rear strut extensions are the core of this Rough Country kit, adding two inches of lift while retaining factory ride quality. For 2018–2020 Crosstrek owners, that added clearance supports on- and off-road travel, while the leveled stance addresses the factory nose-down look.

The kit includes front sway bar brackets alongside its front and rear strut extensions, giving buyers the specified components for a coordinated lift installation. Rough Country describes the kit as an easy at-home install, though its safety information recommends certified installation and calls for suspension knowledge and post-install checks. The two-inch leveling setup is also described as allowing larger tires, so it can pair extra clearance and a more level appearance with a tire upgrade within the stated model-year range.

Skip it if you own a 2021–2024 Crosstrek; ReadyLIFT 69-98200 lists coverage through 2024.

This suits 2018–2020 Crosstrek 4WD owners seeking two inches of clearance, a level stance, and factory-like ride quality. Keep the model-year boundary in mind, and account for the listed recommendation for certified installation and post-install checks.

Listed on Amazon as: Rough Country 2" Lift Kit for 2018-2020 Subaru Crosstrek 4WD – 90300

#3 · Best Bolt-On Design

3. Daystar KS09102BK

• Material: Polyurethane (PU)
• Material Type: Polyurethane (PU)

See also  BEST Ello Pure Glass Water Bottles 2026

Best for: No-strut-disassembly installation seekers.

Why it ranks #3: Offers 2 inches of lift, bolt-on installation without strut disassembly, polyurethane coil spacers, and stated clearance for 29-inch tires on stock wheels.

No-drill, bolt-on installation without strut disassembly is the defining advantage of this Daystar two-inch kit for listed 2019–2020 Crosstrek 4WD models. Its polyurethane coil spacers are specified to prevent metal-on-metal contact, corrosion, and squeaks, linking material choice to an everyday operating benefit.

Daystar says the two-inch lift clears 29-inch tires on stock wheels, while larger tires require trimming, giving buyers a clear tire-size boundary. The polyurethane coil spacers prevent metal-on-metal contact, corrosion, and squeaks, addressing potential contact and maintenance concerns through the listed material design. Because installation is specified as 100% bolt-on with no strut disassembly, the kit also avoids that particular installation step. Fitment is identified for the stated Crosstrek years and 4WD configuration.

Skip it if you need a 2021–2024 fitment; ReadyLIFT 69-98200 lists those later Crosstrek model years.

This suits 2019–2020 Crosstrek 4WD owners seeking a two-inch lift and bolt-on installation without strut disassembly. The stated 29-inch tire clearance applies to stock wheels; larger tire choices require trimming.

Listed on Amazon as: DAYSTAR KS09102BK 2" Lift Kit 2019-2020 Subaru Crosstrek 4WD 2" Lift Kit

#4 · Best Tire Guidance

4. salangid 69-9820

• Material: Cast Iron
• Material Type: Cast Iron

Best for: Tire-fitment-focused Crosstrek owners.

Why it ranks #4: Lists fitment for compatible Crosstreks and explains tire options, including 215/75-15 without trimming and larger sizes with minor plastic trimming.

Its offset geometry is the key feature: the 2.0-inch kit is specified to maintain the original camber angles, giving Crosstrek owners a lift without changing those stated alignment angles. The fitment listing covers 2018–2023 models, including Limited Edition versions with auto-adjust headlights.

The tire guidance gives buyers two distinct setup paths: 215/75-15 tires on 15×7 wheels with a 15mm offset and no trimming, or larger listed sizes with minor plastic trimming. That detail helps clarify the tradeoff between a no-trim fitment and the additional clearance of a larger tire. The kit includes installation hardware, while its specified 2018–2023 compatibility and Limited Edition headlight note help narrow fitment checks before choosing a setup.

Skip it if you want a listed 235/75-15 setup without trimming; ReadyLIFT 69-98200 specifies that tire size with only minor plastic trimming.

Choose this for a listed 2018–2023 Crosstrek when tire sizing and offset geometry guide the decision. Its no-trim guidance applies to the specified 215/75-15 and 15×7 wheel setup; larger listed sizes call for minor plastic trimming.

Listed on Amazon as: 69-9820 2.0" Lift Kit Compatible with 2018-2023 Subaru Crosstrek

#5

5. aFe CONTROL Lift Kit

Best for: 18–23 owners prioritizing geometry.

Why it ranks #5: Its 1.5-inch lift is specified for compatible Crosstreks, with offset front spacers intended to correct geometry and preserve factory ride quality.

Offset front spacers are the aFe CONTROL kit’s key differentiator, specified to correct suspension geometry while providing a 1.5-inch lift. For listed 2018–2023 Crosstrek owners, that combination aims to add ground clearance and accommodate larger off-road tire packages while preserving factory ride quality.

The 1.5-inch lift provides the stated clearance increase for fitting larger off-road tire packages, giving buyers a specific use for the added height. Offset front spacers address suspension geometry, while the listing also says factory ride quality is preserved. Together, those features make the kit relevant to owners who want a moderate lift for rougher terrain without choosing a taller listed lift. The supplied information identifies the 2018–2023 Crosstrek range but provides limited component and installation detail.

Skip it if you need named spacer components and standard-tool installation; Motortane LF-CROSSTREK-30FR lists both for 2017–2025 Crosstrek II.

This fits 2018–2023 Crosstrek owners seeking a moderate lift, geometry-correcting front spacers, and room for larger off-road tires. The supplied details do not identify the included components or installation method, so factor in that information gap.

Listed on Amazon as: aFe 18-23 Subaru Crosstrek CONTROL 1.5in Lift Kit

#6 · Best Rear Load Lift

6. Raceland Crosstrek Lift Kit

Best for: 2013–2017 owners carrying rear loads.

Why it ranks #6: Fits older Crosstreks and lists 2 inches at the front and 2.5 inches at the rear, with rear subframe spacers included.

Its extra half-inch of rear lift is the Raceland kit’s distinguishing detail, with a listed range of two inches front and 2.5 inches rear. For 2013–2017 Crosstrek owners carrying extra load or passengers, that rear-biased height is intended to help maintain the stance.

Raceland includes mounts and hardware for the multi-link rear suspension, which the listing connects to tire clearance, alignment, and ride quality. The 2-inch front and 2.5-inch rear lift also gives buyers a defined stance rather than a uniform rise, with the additional rear height specified for extra load and passengers. The product description positions the kit for rougher terrain and larger tires, while its model-year fitment is limited to 2013–2017 Crosstrek.

Skip it if you need a listed 2018–2024 fitment; ReadyLIFT 69-98200 covers those Crosstrek model years.

This suits 2013–2017 owners who want a higher rear stance for extra passengers or load, along with rear multi-link hardware. Its fitment stops at 2017, so later-model Crosstrek owners need a different year range.

Listed on Amazon as: Raceland 2" Lift Kit for Subaru Crosstrek (2013-2017) – Subframe Spacers Included

#7

See also  Best Towing Gooseneck Hitches for OEM Pucks and Truck Beds

7. Motortane 2.5-inch Kit

• Material: Polyurethane (PU)
• Material Type: Polyurethane (PU)

Best for: 2022–2025 owners wanting 65mm lift.

Why it ranks #7: Lists 2.5 inches of front-and-rear lift for specified Crosstrek models and includes polyurethane spacers and replacement studs.

A 2.5-inch, 65mm lift at both ends is this Motortane kit’s defining specification, aimed at 2022–2025 Crosstrek III owners seeking added clearance. Polyurethane front and rear spacers with replacement studs make up the listed hardware, supporting a raised stance without stated suspension-structure modifications.

The kit supplies two front and two rear polyurethane spacers plus replacement studs, so buyers can identify the key components before installation. Motortane says installation uses standard tools and does not require modifying the original suspension structure; that can simplify the intended workflow compared with a setup involving structural changes. Its description also says the kit is designed to maintain factory-like ride characteristics, while the stated 2.5-inch lift targets ground clearance and obstacle navigation.

Skip it if you own a 2017–2025 Crosstrek II; Motortane LF-CROSSTREK-30FR lists that generation and year range.

Consider it if your Crosstrek III falls within 2022–2025 and a 2.5-inch lift is your target. The polyurethane spacers and standard-tool installation are useful specifics, but this listing does not cover every Crosstrek generation.

Listed on Amazon as: Lift Kit for SUBARU CROSSTREK III 2022-2025 2.5" 65mm Front & Rear

#8

8. Motortane 1.2-inch Kit

• Material: Polyurethane (PU)
• Material Type: Polyurethane (PU)

Best for: Crosstrek II owners wanting modest lift.

Why it ranks #8: Provides a modest 1.2-inch front-and-rear lift for specified Crosstrek models, with polyurethane spacers and replacement studs included.

A front-and-rear lift of 1.2 inches, or 30mm, makes this Motortane kit the modest-height choice in its stated 2017–2025 Crosstrek II range. Polyurethane spacers and replacement studs are included, providing the listed hardware for a raised or level stance without suspension-structure modifications.

The package specifies two front and two rear polyurethane spacers with replacement studs, so the core components are identified for installation planning. Motortane says standard tools are used and the original suspension structure needs no modification, giving buyers a defined workflow. The 1.2-inch lift is intended to increase clearance for obstacle navigation, and the description says the design aims to maintain factory-like ride characteristics. Its broad stated year span is limited to the Crosstrek II generation.

Skip it if you need a 2.5-inch lift for a 2022–2025 Crosstrek III; Motortane LF-CROSSTREK-65FR lists that generation and height.

This is a fit for Crosstrek II owners seeking a 1.2-inch lift, polyurethane spacers, and installation without suspension-structure modifications. Confirm that your vehicle belongs to the listed Crosstrek II generation before choosing it.

Listed on Amazon as: Lift Kit for SUBARU CROSSTREK II 2017-2025 1.2" 30mm Front & Rear

#9

9. Motortane Crosstrek I Kit

• Material: Polyurethane (PU)
• Material Type: Polyurethane (PU)

Best for: First-generation Crosstrek clearance seekers.

Why it ranks #9: Specifically targets the first Crosstrek generation and lists 2.5 inches of front-and-rear lift with polyurethane spacers and replacement studs.

A 2.5-inch, 65mm lift at both ends makes this Motortane kit a substantial clearance option for the listed 2012–2017 Crosstrek I. Its polyurethane front and rear spacers, supplied with replacement studs, support a raised or level stance for owners targeting rougher terrain.

The package lists two front and two rear polyurethane spacers plus replacement studs, spelling out the core hardware for the lift. Motortane says the setup uses standard tools and requires no modifications to the original suspension structure, which gives buyers a clear installation boundary. The 2.5-inch height is intended to increase clearance for obstacle navigation, while the product description says it is designed to maintain factory-like ride characteristics on the specified first-generation models.

Skip it if you own a 2017–2025 Crosstrek II; Motortane LF-CROSSTREK-30FR is listed for that generation instead.

This targets first-generation 2012–2017 Crosstrek owners who want 2.5 inches of added height and polyurethane spacers. Check the generation boundary carefully; its fitment differs from Motortane’s listing for the later Crosstrek II.

Listed on Amazon as: Lift Kit for SUBARU CROSSTREK I 2012-2017 2.5" 65mm Front & Rear

#10

10. DEALPAREX Leveling Kit

• Material: Polyurethane
• Material Type: Polyurethane

Best for: Earlier Crosstrek owners seeking modest lift.

Why it ranks #10: Lists Crosstrek fitment for older models and 1.2 inches of lift, but also covers several other Subaru lines rather than focusing on Crosstrek.

A 1.2-inch, 30mm lift and polyurethane construction define this DEALPARTS full kit for 2012–2017 Crosstrek models. Its modest height suits buyers who want a smaller increase than the two-inch options, while the supplied front and rear strut spacers provide the listed lifting components.

The kit includes two front and two rear strut spacers plus a fitting kit, making the supplied hardware clear for planning installation. DEALPARTS identifies ultra-high-density polyurethane made in France and describes the material as supporting long product life. The 1.2-inch lift is also positioned for easier off-road driving and travel over uneven surfaces. Its compatibility list spans several Subaru models, but Crosstrek coverage is specifically 2012–2017, an important boundary for owners of later models.

Skip it if you own a 2018–2024 Crosstrek; ReadyLIFT 69-98200 lists coverage for those newer model years.

Choose this for a 2012–2017 Crosstrek when a 1.2-inch lift and polyurethane spacers fit your plans. The listing covers other Subaru models too, but its Crosstrek compatibility does not extend to later years.

Listed on Amazon as: DEALPAREX Leveling Lift Kit 1.2 inch 30mm for Subaru – Full Kit