A strong RAV4 lift kit should match your vehicle’s generation, provide a clearly stated lift height, and include the spacers and hardware its design requires. ReadyLIFT 69-53200 is a compelling fit for owners of compatible earlier RAV4s who want a 2-inch front and 1-inch rear lift, with a stated tire and wheel fitment. This roundup also covers kits for later models, full front-and-rear spacer sets, and options with additional sway-bar or suspension components.
Fitment is the first filter: products here cover different generations and are not interchangeable. Compare the exact vehicle application, lift configuration, materials, and installation guidance before choosing.
The lift height alone does not establish compatibility or guarantee clearance for a particular tire setup.
ReadyLIFT 69-53200 is the leading choice for compatible RAV4 owners seeking a defined lift and tire-fitment target. It provides a 2-inch front and 1-inch rear lift, fits AWD and FWD models in its listed generation range, and specifies use of up to a 245/65-17 tire on a 17×8 wheel with +38 offset. Its offset spacer design is also described as retaining factory camber and caster.
Confirm that your exact vehicle is covered before ordering; this kit is not listed for every RAV4 generation.
Our Top Picks
Best OverallIts 2-inch front and 1-inch rear lift fits listed AWD and FWD models, and it specifies a 245/65-17 tire on a 17×8 wheel with +38 offset.
View on Amazon
Upgraded Sway LinksFor its listed generation, it combines a 2-inch front and 1.5-inch rear lift with upgraded sway-bar end-links and specified tire fitment.
View on Amazon
Bolt-On OptionThe listed application covers an earlier RAV4 generation and provides 2 inches front and 1.5 inches rear lift with a stated bolt-on installation.
View on Amazon- Extended Components Tema4x4 Complete Kit
- Highest Lift Rough Country 2.5-Inch Kit
Compare lift kits by fitment, lift, and stated features
| # | Product | Weight | Material | Material Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. ReadyLIFT SST KitBest Overall | 13 lb | Alloy Steel, Aluminum | Alloy Steel, Aluminum | View on Amazon |
| 2 | 2. dynofit Leveling KitUpgraded Sway Links | — | Aluminum, Carbon Steel | Aluminum, Carbon Steel | View on Amazon |
| 3 | 3. maXpeedingrods Lift KitBolt-On Option | 11.35 lb | — | — | View on Amazon |
| 4 | 4. Tema4x4 Complete KitExtended Components | 8.8 lb | Polyurethane | Polyurethane | View on Amazon |
| 5 | 5. AUTOACER Leveling KitProfessional 40mm Spacer Install | 4.5 lb | Polyurethane, Steel | Polyurethane, Steel | View on Amazon |
| 6 | 6. DEALPARTS Leveling KitPolyurethane Spacer Kit | 4.2 lb | Polyurethane | Polyurethane | View on Amazon |
| 7 | 7. Rough Country 2.5-Inch KitHighest Lift | — | — | — | View on Amazon |
| 8 | 8. Daystar KT09138BKStock-Wheel Tire Clearance | 5 lb | Polyurethane (PU) | Polyurethane (PU) | View on Amazon |
| 9 | 9. Motortane XA50 KitRecent XA50 Clearance Lift | — | Polyurethane (PU) | Polyurethane (PU) | View on Amazon |
| 10 | 10. Tema4x4 Older-Generation KitFirst-Generation RAV4 Clearance | 8.8 lb | — | — | View on Amazon |
Detailed Reviews: Best Lift Kit For Rav4

#1 · Best Overall
1. ReadyLIFT SST Kit
- Weight: 13 lb
- Material: Alloy Steel, Aluminum
- Material Type: Alloy Steel, Aluminum
Best for: Trail Tire Fitment Focus.
Why it ranks #1: Its 2-inch front and 1-inch rear lift fits listed AWD and FWD models, and it specifies a 245/65-17 tire on a 17×8 wheel with +38 offset.
A 2-inch front and 1-inch rear lift paired with a stated 245/65-17 tire limit makes ReadyLIFT’s kit a specific option for 2006–2018 RAV4 owners planning trail-oriented clearance. Its steel and billet aluminum construction supplies the spacers for that fitment-focused setup.
The different front and rear lift heights raise clearance while retaining a measured stance, and the kit’s stated tire allowance—up to 245/65-17 on a 17×8 wheel with +38 offset—gives wheel-and-tire planners a concrete boundary. ReadyLIFT attributes factory camber and caster retention to its offset spacer design, supporting alignment considerations after installation. The listing also says installation takes half the time of other kits, though it does not provide a specific duration.
- Compatible with 2006–2018 RAV4 models, including Adventure
- Provides 2 inches of front lift and 1 inch of rear lift
- Allows up to 245/65-17 tires on specified 17×8, +38-offset wheels
- Offset spacer design retains factory camber and caster
- The stated tire allowance is limited to the specified size and wheel offset.
Skip it if you need a kit for a 2019 RAV4; Daystar KT09138BK is listed specifically for that model year.
This fits owners of a 2006–2018 RAV4 who want trail clearance and have a wheel-and-tire plan matching the listed 245/65-17 specification. Its offset design addresses alignment, but the stated fitment parameters matter.
Full product details
| Brand | Readylift |
|---|---|
| Included Components | 2.0'' SST Lift Kit |
| Item Weight | 13 pounds |
| Manufacturer | ReadyLIFT |
| Part Number | 69-53200 |
| Manufacturer Warranty Description | Please see manufacturer |
| Material | Alloy Steel, Aluminum |
| Model Number | 69-53200 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: ReadyLIFT 69-53200 2.0'' SST Lift Kit For Toyota Rav4 AWD/FWD
View on Amazon
#2 · Upgraded Sway Links
2. dynofit Leveling Kit
- Material: Aluminum, Carbon Steel
- Material Type: Aluminum, Carbon Steel
Best for: Upgraded Sway-Bar Link Setup.
Why it ranks #2: For its listed generation, it combines a 2-inch front and 1.5-inch rear lift with upgraded sway-bar end-links and specified tire fitment.
Upgraded sway-bar end-links distinguish dynofit’s 2-inch-front, 1.5-inch-rear lift kit for 2006–2018 RAV4s. The manufacturer says the links eliminate relocation-bracket flex and compliance associated with the original sway-bar mounting system, while the listed setup also supports a specified larger-tire combination.
The kit pairs front strut spacers and rear coil spring spacers with upgraded sway-bar end-links, addressing both lift and sway-bar mounting in one package. Dynofit lists fitment for 2006–2018 RAV4s and allows up to 245/65-17 tires on a 17×8 wheel with +38 offset, giving buyers a concrete wheel-and-tire limit. The lift heights differ front to rear, and the listing cautions that lift height is not the same as rear spacer thickness.
- Listed for Toyota RAV4 models from 2006–2018
- Provides 2 inches of front lift and 1.5 inches at the rear
- Includes upgraded sway-bar end-links, strut spacers, and coil spacers
- Allows specified 245/65-17 tires on 17×8 wheels with +38 offset
- Front and rear lift heights differ, and rear spacer thickness does not equal lift height.
Skip it if you need a uniform 2-inch lift front and rear; Motortane LF-TYRAV4-XA50-50FR lists 2 inches at both ends.
This suits a 2006–2018 RAV4 owner wanting upgraded sway-bar links alongside lift and a tire setup within the stated wheel specification. Account for the unequal lift heights and rear spacer distinction.
Full product details
| Brand | dynofit |
|---|---|
| Included Components | 1x pack of bolt accessories(All necessary hardware), 2x front strut spacers, 2x rear coil spring spacers, 2x small iron plates, 2x sway bar end-links See more |
| Manufacturer | dynofit |
| Part Number | 9K613 |
| Manufacturer Warranty Description | Manufacturer Warranty For 2 Years |
| Material | Aluminum, Carbon Steel |
| Model Number | 2006-2018 RAV4 |
Why it ranks #3: The listed application covers an earlier RAV4 generation and provides 2 inches front and 1.5 inches rear lift with a stated bolt-on installation.
A 2-inch front lift paired with a 1.5-inch rear lift gives this maXpeedingrods kit a distinct front-to-rear profile for 2006–2018 RAV4s. The spacers raise suspension clearance, helping owners seeking room for bigger tires while changing the vehicle’s stance.
The kit’s front strut spacers and rear lift components provide different lift heights—2 inches up front and 1.5 inches at the rear—so buyers can account for that stance when considering tire changes. Its bolt-on mounting is specified to require no special tools, and the stated installation estimate is 2–4 hours. That gives a hands-on owner a defined installation workflow, though the supplied information does not identify every included component.
- Fits Toyota RAV4 models from 2006–2018
- Provides 2 inches of front lift and 1.5 inches of rear lift
- Raises ground clearance and allows bigger tires
- Bolt-on installation requires no special tools; estimated at 2–4 hours
- The front and rear lift heights differ, so it does not raise both ends equally.
Skip it if you need a kit for a 2019-or-newer RAV4; Rough Country 73100 is listed for 2019–2021 models.
This suits owners of a 2006–2018 RAV4 who want added clearance and a bolt-on installation path. Keep the 2-inch front and 1.5-inch rear lift split in mind when choosing tires or evaluating the finished stance.
Full product details
| Brand | maXpeedingrods |
|---|---|
| Item Weight | 11.35 pounds |
| Manufacturer | maXpeedingrods |
| Part Number | KJ236 |
| Dimensions | 10.63 x 7.48 x 5.91 inches |
Listed on Amazon as: maXpeedingrods 2” Front & 1.5” Rear Lift Kit for Toyota RAV4 2006-2018
View on Amazon
#4 · Extended Components
4. Tema4x4 Complete Kit
- Weight: 8.8 lb
- Material: Polyurethane
- Material Type: Polyurethane
Best for: Complete Older-Generation Hardware.
Why it ranks #4: This 40mm kit covers two listed RAV4 generations and includes rear shock, sway-bar, and brake-line extensions alongside its spacers.
A 40mm package that includes sway-bar and brake-line extensions distinguishes Tema4x4’s front-and-rear kit for RAV4 XA30 and XA40 models. Along with strut and coil spacers, those extensions give buyers a broader hardware set for raising clearance and accommodating larger custom rims or tires.
The kit combines front strut spacers and rear coil spacers with rear shock extenders, sway-bar extensions, and brake-line extensions. Those named pieces make the package more comprehensive than a spacer-only listing, while the 40mm lift raises clearance for larger custom rims and tires. Compatibility is stated for XA30 models from 2005–2012 and XA40 models from 2013–2018, with another description specifying 2005–July 2016, so the application details merit careful review.
- 40mm complete front-and-rear lift kit
- Listed for RAV4 XA30 and XA40 generations
- Includes rear shock, sway-bar, and brake-line extensions
- Raises clearance to allow larger custom rims and tires
- The supplied compatibility descriptions give differing end dates for the application range.
Skip it if you need a kit for a 2000–2005 RAV4; Tema4x4 TOY-RAV4-GEN2-1/40 is listed for that earlier generation.
This may suit XA30 or XA40 owners wanting 40mm of lift and extensions alongside the main spacers. Review the differing supplied application end dates against the vehicle before selecting the kit.
Full product details
| Brand | Tema4x4 |
|---|---|
| Included Components | coil spacers,strut spacers,sway bar |
| Item Weight | 8.8 pounds |
| Manufacturer | Tema4x4 |
| Part Number | TOY-RAV4-GEN34-2/40 |
| Material | Polyurethane |
Listed on Amazon as: Complete Front and Rear Lift Kit 40mm compatible with RAV4 2006-2018
View on Amazon
#5
5. AUTOACER Leveling Kit
- Weight: 4.5 lb
- Material: Polyurethane, Steel
- Material Type: Polyurethane, Steel
Best for: Professional 40mm Spacer Install.
Why it ranks #5: Its 40mm front strut and rear spring spacers cover two listed generations, and the specifications include extended strut bolts and a five-year warranty.
Matched 40mm front strut and rear coil spacers give AUTOACER’s kit an even lift profile for RAV4 XA30 and XA40 models from 2006–2018. Its polyurethane spacers and extended strut bolts make the package specific to buyers prepared for professional installation.
The kit includes two 40mm front strut spacers, two 40mm rear spring spacers, and six extended strut bolts, assembling the listed hardware for both ends of the vehicle. AUTOACER explicitly requires professional installation, so this is not presented as a casual driveway spacer job. Its generation coverage is divided into XA30 for 2006–2012 and XA40 for 2013–2018, helping buyers identify the relevant application before arranging the work.
- Fits listed RAV4 XA30 models from 2006–2012 and XA40 models from 2013–2018
- Provides 40mm spacers at both front and rear
- Includes six extended strut bolts
- Polyurethane spacers are supplied for front and rear suspension
- Professional mechanic installation is required.
Skip it if you plan to install the kit yourself; maXpeedingrods KJ236 specifies bolt-on installation without special tools.
This suits owners of a listed 2006–2018 RAV4 who want matching 40mm front and rear spacers and can arrange a professional mechanic. Its generation-specific fitment and installation requirement are key boundaries.
Full product details
| Brand | AUTOACER |
|---|---|
| Included Components | 10 Pieces – Brand New, Superior Quality, 2x Front Poly Strut Spacers (40mm) – Designed to blend aggressive style with top-tier performance, key to off-road dominance and on-road presence., 2x Rear Poly Spring Spacers (40mm) – Crafted from high grade polyurethane, this will give you long-lasting dura |
| Item Weight | 4.5 pounds |
| Manufacturer | AUTOACER |
| Part Number | 01PU603 |
| Manufacturer Warranty Description | 5 YEAR WARRANTY: As a U.S. company, AUTOACER backs the quality of our products and covers manufacturer-related defects for five years from the time of purchase. |
| Material | Polyurethane, Steel |
| Model Number | Rav 4 |

#6
6. DEALPARTS Leveling Kit
- Weight: 4.2 lb
- Material: Polyurethane
- Material Type: Polyurethane
Best for: Polyurethane Spacer Kit.
Why it ranks #6: This 1.6-inch polyurethane kit lists broad earlier-generation fitment and includes front strut spacers, coil spacers, and a fitting kit.
High-density polyurethane is the defining material in DEALPARTS’ 1.6-inch RAV4 lift kit, which covers listed applications from 2005 through 2019. Its strut and coil spacers raise clearance and can make room for custom rims and tires, with fitment details tied to specific RAV4 variants.
The full kit combines two strut spacers, two coil spacers, and fitting hardware, giving the buyer both front and rear spacer types for the listed lift setup. DEALPARTS specifies polyurethane made in France and describes it as ultra-high density, connecting material choice with its stated long-life aim. The listed RAV4 applications include model families spanning 2005–2019; checking the specific variant against those supplied compatibility details is important before planning installation or wheel changes.
- Listed for compatible RAV4 applications spanning 2005–2019
- Provides a 1.6-inch, 40mm lift
- Includes two strut spacers, two coil spacers, and fitting kit
- Polyurethane spacers raise clearance and allow custom rims and tires
- The supplied application list identifies specific RAV4 variants rather than every configuration.
Skip it if you need a lift kit for a 2000–2005 RAV4; Tema4x4 TOY-RAV4-GEN2-1/40 is listed for those years.
Consider this for a compatible 2005–2019 RAV4 when a polyurethane spacer kit and 1.6-inch lift suit your plans. Its listed variant applications deserve close attention, especially if custom rims or tires are part of the setup.
Full product details
| Brand | DEALPARTS |
|---|---|
| Included Components | fitting kit |
| Item Weight | 4.2 pounds |
| Manufacturer | DEALPARTS |
| Part Number | 10-15-028 + 10-15-040/40 |
| Material | Polyurethane |
| Model Number | 10-15-028 + 10-15-040/40 |
Listed on Amazon as: Leveling Lift Kit 1.6 inch 40mm for Toyota – Full Kit
View on AmazonWhy it ranks #7: Its 2.5-inch kit is listed for later 2WD and 4WD models and includes front and rear suspension and subframe components.
A multi-piece spacer system gives Rough Country’s 2.5-inch kit broad suspension coverage for 2019–2021 RAV4s in either 2WD or 4WD. It levels the front with the rear, helping address the factory nose-down look while providing clearance for larger tires.
Front strut spacers work alongside front sway bar brackets, while rear shock extensions, spring spacers, trailing-arm spacers, subframe spacers, and support address several rear mounting points. That component spread supports a front-to-rear leveling setup rather than relying on a single spacer type. Rough Country says the kit maintains factory ride quality and supports larger tires. Although installation is described as easy at home, its safety information recommends a certified technician and post-install checks.
- Listed for 2019–2021 Toyota RAV4 models
- Compatible with both 2WD and 4WD
- 2.5-inch lift levels the vehicle front to rear
- Includes front and rear suspension and subframe components
- Rough Country recommends certified-technician installation and post-install checks.
Skip it if you own a 2006–2018 RAV4; maXpeedingrods KJ236 is listed for those model years.
Choose this for a 2019–2021 2WD or 4WD RAV4 when leveling and larger-tire clearance are priorities. The extensive rear component set merits attention, and Rough Country recommends qualified installation and suspension checks afterward.
Full product details
| Brand | Rough Country |
|---|---|
| Included Components | Front Strut Spacers, Front Sway Bar Brackets, Rear Shock Extensions, Rear Spring Spacers, Rear Trailing Arm Spacers, Rear Subframe Spacers, Rear Subframe Support, See more |
| Manufacturer | Rough Country |
| Part Number | 73100 |
| Manufacturer Warranty Description | Limited |
| Model Number | 73100 |
| Additional Information | Important information Safety Information "RC recommends a certified technician install lift systems. Knowledge of RC instructions, suspension procedures and post install checks are required. If a system is installed w/o knowledge and expertise it may impact the integrity/operating safety." |
Listed on Amazon as: Rough Country 2.5" Lift Kit for 2019-2021 Toyota RAV4 2WD/4WD – 73100
View on Amazon
#8
8. Daystar KT09138BK
- Weight: 5 lb
- Material: Polyurethane (PU)
- Material Type: Polyurethane (PU)
Best for: Stock-Wheel Tire Clearance.
Why it ranks #8: Listed for a later-generation model, it provides a 2-inch lift and specifies clearance for 29.5-inch tires on stock wheels.
Daystar’s stated ability to clear 29.5-inch tires on stock wheels gives its 2-inch kit a concrete target for 2019 RAV4 owners. The polyurethane suspension lift is also specified to maintain factory ride and load-carrying capacity, linking tire clearance with everyday vehicle use.
The 2-inch lift is a 100% bolt-on installation with no cutting or drilling, which avoids those specific modification steps during fitting. Daystar states that the kit clears 29.5-inch tires on stock wheels, giving buyers a defined tire-and-wheel combination to consider. Its polyurethane construction accompanies the stated retention of factory ride and load-carrying capacity. The supplied listing identifies a 2019 RAV4 application, making that model year an important fitment boundary.
- 2-inch suspension lift for the listed 2019 RAV4
- Clears 29.5-inch tires on stock wheels
- Bolt-on installation requires no cutting or drilling
- Maintains factory ride and load-carrying capacity
- The supplied application identifies the 2019 RAV4, not a broader model-year range.
Skip it if you need a kit explicitly listed for 2006–2018 RAV4s; ReadyLIFT 69-53200 covers that model-year range.
This fits a 2019 RAV4 owner prioritizing 29.5-inch tires on stock wheels while retaining stated ride and load capacity. Its listed application is specific to 2019, so later model years are not established here.
Full product details
| Brand | Daystar |
|---|---|
| Included Components | Suspension Leveling Kit |
| Item Weight | 5 pounds |
| Manufacturer | DAYSTAR |
| Part Number | KT09138BK |
| Manufacturer Warranty Description | Limited Lifetime Warranty |
| Material | Polyurethane (PU) |
| Model Number | KT09138BK |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Daystar KT09138BK Suspension Lift Kit 2" fits 2019 Toyota RAV4
View on Amazon
#9
9. Motortane XA50 Kit
- Material: Polyurethane (PU)
- Material Type: Polyurethane (PU)
Best for: Recent XA50 Clearance Lift.
Why it ranks #9: The 2-inch front-and-rear polyurethane kit lists broad later-generation application, replacement studs, and installation without suspension-structure modifications.
A uniform 2-inch front-and-rear lift defines Motortane’s polyurethane kit for the RAV4 XA50, with the title listing 2018–2025 applications. The raised stance targets added ground clearance for obstacle navigation, while separate front and rear spacers supply the main lift components.
Two front and two rear polyurethane spacers create the listed 2-inch lift at both ends, giving XA50 owners a straightforward basis for planning a level or raised stance. Replacement studs are included, and the description says installation uses standard tools without modifying the original suspension structure. Motortane also states that the kit is intended to maintain factory-like ride characteristics. The broad 2018–2025 title range makes matching the specific vehicle application especially important.
- Title lists RAV4 XA50 applications from 2018–2025
- Provides a 2-inch lift at front and rear
- Includes front and rear polyurethane spacers plus replacement studs
- Uses standard tools without original suspension-structure modifications
- The supplied fitment is identified as XA50, limiting its relevance to other RAV4 generations.
Skip it if you have a 2006–2018 RAV4 outside the XA50 listing; ReadyLIFT 69-53200 covers 2006–2018 models.
This is a candidate for an XA50 owner seeking a 2-inch lift, polyurethane spacers, and installation without structural suspension changes. Confirm that the vehicle matches the listed XA50 application before relying on the broad year range.
Full product details
| Brand | Motortane |
|---|---|
| Included Components | 2 Front Polyurethane spacers, 2 Rear Polyurethane spacers, Replacement Studs |
| Manufacturer | Motortane |
| Part Number | 64016-8-6-20-6/3040 XA50 |
| Manufacturer Warranty Description | We also offer “ 30-DAYs REFUND ” service, We hope that MOTORTANE can make your shopping experience enjoyable. Feel free to contact us if you have any problems. |
| Material | Polyurethane (PU) |
| Model Number | LF-TYRAV4-XA50-50FR |
Listed on Amazon as: Lift Kit for TOYOTA RAV4 XA50 2018-2025 2" 50mm Front & Rear
View on AmazonWhy it ranks #10: This 40mm complete kit is specifically listed for the oldest RAV4 generation here, making its fitment narrower than the other options.
A 40mm lift specifically listed for Toyota RAV4 models from 2000–2005 makes this Tema4x4 kit a generation-focused choice. Its added clearance is presented for negotiating snow, dirt, country roads, and higher curbs, while the lift can also accommodate larger custom rims and tires.
The listing identifies a complete 40mm lift kit and names coil and strut spacers among the included components. That combination connects the raised stance with the practical clearance benefits described for snow, dirt, country roads, and parking near higher curbs. Tema4x4 also says the lift can allow larger custom rims and tires. Because the application is specifically 2000–2005, its use case is tied to older RAV4s rather than later generations.
- Listed for Toyota RAV4 models from 2000–2005
- Provides a 40mm lift
- Includes coil and strut spacers
- Added clearance supports snow, dirt, country roads, and higher curbs
- Its listed application is limited to 2000–2005 RAV4 models.
Skip it if you own a 2006–2018 RAV4; Tema4x4 TOY-RAV4-GEN34-2/40 covers XA30 and XA40 generations.
This is aimed at owners of a 2000–2005 RAV4 who want 40mm of clearance for rougher roads or larger wheels and tires. Its generation-specific application excludes later RAV4 models.
Full product details
| Brand | Tema4x4 |
|---|---|
| Included Components | coil spacers,strut spacers |
| Item Weight | 8.8 pounds |
| Manufacturer | Tema4x4 |
| Part Number | TOY-RAV4-GEN2-1/40 |
Listed on Amazon as: Complete Lift Kit 40mm for Toyota RAV4 2000-2005
View on AmazonCheck the full vehicle fitment before buying
A matching RAV4 name is not enough to establish that a lift kit fits: the listings cover different generations, and even similar lift heights do not make parts interchangeable. ReadyLIFT 69-53200 and maXpeedingrods Lift Kit list an earlier-generation application, while Rough Country 2.5-Inch Kit and Daystar KT09138BK target later models. Motortane XA50 Kit lists the XA50 platform, and Tema4x4 Older-Generation Kit is for the oldest generation in this roundup.
Some product descriptions span overlapping application years, so use the manufacturer’s fitment details and confirm your exact model, drivetrain, and suspension configuration before ordering. Treat broad compatibility wording as a prompt to verify, not as a substitute for checking the specific vehicle.
A wrong-generation spacer or extension can prevent correct installation; a general RAV4 label cannot resolve that mismatch.
Lift height is not tire clearance by itself
A stated lift height does not guarantee that a particular tire will clear every RAV4 setup. ReadyLIFT 69-53200 names a specific maximum tire and wheel combination, and Daystar KT09138BK states clearance for 29.5-inch tires on stock wheels. Most other listings give lift height but no equally specific tire limit.
Rough Country 2.5-Inch Kit says its lift allows larger tires, but does not provide a size in the supplied details. Wheel width and offset are part of ReadyLIFT’s stated fitment, illustrating why tire diameter alone is an incomplete guide.
Before changing tire size, check the kit maker’s fitment guidance and account for the wheel setup and vehicle configuration. Do not infer an approved tire size from the spacer height or assume one kit’s stated tire clearance applies to another kit.
How to Choose a RAV4 Lift Kit
Vehicle generation and drivetrain
Look first for an application that names your RAV4 generation and drivetrain, because the kits in this roundup do not cover the same vehicles. ReadyLIFT SST Kit and dynofit Leveling Kit list earlier-generation applications; the latter also describes 2-inch front and 1.5-inch rear lift. Rough Country 2.5-Inch Kit is listed for later 2WD and 4WD models, while Motortane XA50 Kit targets the XA50 platform.
Tema4x4 Older-Generation Kit is specifically for the oldest generation represented. Buyers with a vehicle covered by a narrow application should choose that exact match over a kit with a larger lift.
If application details leave uncertainty, verify the full vehicle configuration with the maker before buying.
Lift amount and front-to-rear balance
Choose a lift configuration that suits your desired stance, rather than comparing a single height number in isolation. ReadyLIFT SST Kit specifies 2 inches at the front and 1 inch at the rear; maXpeedingrods Lift Kit and dynofit Leveling Kit specify 2 inches front and 1.5 inches rear. DEALPARTS Leveling Kit and AUTOACER Leveling Kit list 1.6 inches, while Rough Country 2.5-Inch Kit lists 2.5 inches.
Motortane XA50 Kit specifies 2 inches front and rear. A buyer seeking a modest, even lift may prefer the 1.6-inch options; someone prioritizing a higher stated lift may consider Rough Country, provided fitment matches.
Confirm whether listed height describes each axle or the kit’s overall lift.
Included suspension components
Check the included parts against the lift design and the installation guidance, since the kits vary beyond their spacers. Tema4x4 Complete Kit includes rear shock extenders, sway-bar extensions, and brake-line extensions. dynofit Leveling Kit includes upgraded sway-bar end-links, while ReadyLIFT SST Kit uses an offset spacer design and specifies steel and aluminum construction.
AUTOACER Leveling Kit includes extended strut bolts and calls for professional installation; Rough Country 2.5-Inch Kit lists multiple rear subframe and suspension components. Buyers who want a kit with additional extensions or links should compare those contents closely.
Those seeking a simpler spacer set should still verify whether all required hardware is included and whether the manufacturer recommends a qualified installer.
Which RAV4 Lift Kit Should You Choose?
For a compatible earlier-generation RAV4 and a clearly specified tire target, choose ReadyLIFT SST Kit: it states a 2-inch front, 1-inch rear lift and a 245/65-17 tire on a 17×8 wheel with +38 offset. If you want upgraded sway-bar links and a 2-inch front, 1.5-inch rear setup, consider dynofit Leveling Kit after confirming fitment. For a kit with shock, sway-bar, and brake-line extensions, Tema4x4 Complete Kit lists those components for its covered generations.
Later-model owners should compare Rough Country 2.5-Inch Kit, Daystar KT09138BK, and Motortane XA50 Kit against their exact vehicle; their stated applications differ. For a modest 1.6-inch lift, DEALPARTS Leveling Kit or AUTOACER Leveling Kit may suit a compatible vehicle.
Verify fitment and installation requirements before ordering.
Related Buying Guides
- Best Chevy Lift Kits
- Best Tundra Lift Kit
- Best Crosstrek Lift Kit
- Best Xj Lift Kit
- Best Yj Lift Kit
- Best Lift Kit For Subaru Crosstrek
Frequently Asked Questions
Will a RAV4 lift kit affect alignment, steering, or ride quality?
It can, depending on the kit and vehicle. The ReadyLIFT spacer design is described as retaining factory camber and caster, but that detail should not be assumed for other kits. Check the product’s installation requirements and have alignment and handling assessed after installation.
What tire size can I run after lifting my RAV4?
It depends on the exact kit, wheel, and vehicle fitment. ReadyLIFT specifies up to a 245/65-17 tire on a 17×8 wheel with +38 offset; the ReadyLIFT SST listing gives the same target. Do not treat that specification as universal to other kits or RAV4 generations.
Should I have a RAV4 lift kit installed by a professional?
Professional installation is a sensible choice if you are not equipped to follow the kit’s installation requirements. Kits can differ in included components and vehicle coverage, so confirm fitment first and follow the manufacturer’s instructions. Check alignment and vehicle behavior after installation.
How do I confirm a lift kit fits my RAV4?
Match the kit’s stated generation, model year, and drivetrain coverage to your exact vehicle before ordering. Listings differ: some cover specific year ranges or AWD/FWD applications, while others have narrower stated applications. If your configuration is not clearly covered, verify it with the seller or manufacturer.
What kit features should I compare besides lift height?
Compare stated tire targets, drivetrain and generation coverage, and included components. For example, the verdict identifies upgraded sway-bar links with dynofit and shock, sway-bar, and brake-line extensions with Tema4x4. These features vary by kit, so confirm the listing matches your vehicle and installation needs.
Final Words
Start by matching the kit to your RAV4’s exact generation, year, and drivetrain; do not choose on lift height alone. For a compatible vehicle and a defined tire target, ReadyLIFT is the leading option, with its stated 2-inch front, 1-inch rear lift and 245/65-17 specification. Consider the alternatives for their stated fitment or components, then verify installation requirements before ordering.



