A strong RV TV mount holds a compatible screen securely during travel and gives you useful viewing adjustment when parked, making it suited to campers, trailers, and motorhomes. The options here vary in locking design, supported weight, VESA patterns, and whether they include two wall plates for moving a TV between locations. Perlegear Lockable RV TV Mount leads with a pull-cord lock, support for TVs up to 44 pounds, and compatibility with VESA patterns from 75x75mm through 200x200mm.
Other picks suit specific needs, including a UL-listed design, a rust-resistant polymer bracket, or a quick-release setup for indoor and outdoor viewing. Before choosing, check your television’s weight and VESA pattern, then confirm that the intended RV wall or structure can safely accept the mount.
Perlegear Lockable RV TV Mount is the best overall choice in this roundup because it combines a pull-cord locking mechanism with support for TVs up to 44 pounds and a broad set of VESA patterns, including 100x200mm. It fits TVs listed at 13–43 inches and can be installed on single wood studs, concrete, or brick. Confirm your television’s actual VESA pattern, weight, and screen size, and verify that your RV’s mounting surface is suitable before buying.
Our Top Picks
Best OverallIts pull-cord lock, 44-pound capacity, and VESA coverage from 75x75mm to 200x200mm suit a wide range of compatible RV televisions.
View on Amazon
Broad Wall CompatibilityThe pull-cord lock supports travel use, while listed installation surfaces include single wood studs, concrete, and brick.
View on Amazon
Dual-Plate OptionIts dual wall plates support relocating a compatible TV between indoor and outdoor areas, and its stated weight capacity is 44 pounds.
View on Amazon- UL-Listed Lock Mounting Dream MD2210
- Toothed Locking Arm Mount-It! MI-429
Compare RV TV Mount Features and Fit
| # | Product | Material | Compatible Devices | Warranty Description | Maximum-Supported Screen Size | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. Perlegear Lockable RV MountBest Overall | Metal | Television | — | 42 in | View on Amazon |
| 2 | 2. USX MOUNT Lockable RV MountBroad Wall Compatibility | Metal | Monitor, Television | — | 43 in | View on Amazon |
| 3 | 3. suptek Lockable RV MountDual-Plate Option | Metal | Television | — | 42 in | View on Amazon |
| 4 |  4. Mounting Dream MD2210UL-Listed Lock | Metal | Television | 10 years warranty | 43 in | View on Amazon |
| 5 |  5. Mount-It! MI-429Toothed Locking Arm | Aluminum | RVs, Mobile Homes | — | 42 in | View on Amazon |
| 6 |  6. Mount-It! MI-432Detachable aluminum installation | Aluminum | Television | — | 42 in | View on Amazon |
| 7 |  7. MOUNTUP MU2101Wide-angle RV viewing | Metal | Television | 3 year | 43 in | View on Amazon |
| 8 |  8. ELIVED Dual-Latch RV MountDual-pin travel restraint | Metal | Television | 10 Years Warranty | 43 in | View on Amazon |
| 9 |  9. VIVO Mount-TVQR1Quick TV relocation | Aluminum, Steel, Plastic | Television | 3 Year Warranty | 43 in | View on Amazon |
| 10 |  10. VIVO MOUNT-VWRV1Rust-free outdoor mounting | Plastic | Television | 3 Year Warranty | 43 in | View on Amazon |
Detailed Reviews: Best RV Tv Mounts
#1 · Best Overall
1. Perlegear Lockable RV Mount
- Material: Metal
- Compatible Devices: Television
- Maximum-Supported Screen Size: 42 in
Best for: Flexible wall mounting options.
Why it ranks #1: Its pull-cord lock, 44-pound capacity, and VESA coverage from 75x75mm to 200x200mm suit a wide range of compatible RV televisions.
Compatibility with single wood studs, concrete, and brick gives the Perlegear PGLRVF2 more listed wall choices than a stud-only installation. Its pull-cord lock helps keep a compatible TV steady during travel, while full-motion flexibility supports repositioning after arrival.
The mount accommodates 13–43-inch TVs up to 44 pounds and lists VESA patterns from 75x75mm through 200x200mm, including 100x200mm. That broad pattern range can work with many common TV layouts, while the wall-material options let owners plan around wood studs, concrete, or brick. The pull-cord lock is the travel restraint; its 3.9-pound item weight is also a practical consideration when handling the mount during installation.
- Fits TVs from 13 to 43 inches
- Supports up to 44 pounds
- Includes 100x200mm VESA compatibility
- Lists installation on wood studs, concrete, or brick
- The specified maximum screen size is 42 inches, despite the title listing 43 inches.
Skip it if you need a 45-inch TV mount; USX MOUNT rv tv wall mount lists support up to 45 inches.
The Perlegear suits RV owners who need a pull-cord travel lock, full-motion positioning, and wall-material flexibility. Keep its listed 42-inch maximum screen specification in mind when selecting a TV, despite the title’s 43-inch claim.
Full product details
| Brand | Perlegear |
|---|---|
| Color | Black |
| Compatible Devices | Television |
| Enclosure Material | Metal |
| Item Weight | 3.9 pounds |
| Manufacturer | BESTQI INNOVATION (HONGKONG) TECHNOLOGY CO., LIMITED |
| Material | Metal |
| Maximum-Supported Screen Size | 42 inches |
| Minimum-Supported Screen Size | 13 inches |
| Model Number | PGLRVF2 |
Listed on Amazon as: Perlegear Lockable RV TV Mount for 13–43 inch TVs up to 44 lbs
View on Amazon#2 · Broad Wall Compatibility
2. USX MOUNT Lockable RV Mount
- Material: Metal
- Compatible Devices: Monitor, Television
- Maximum-Supported Screen Size: 43 in
Best for: Quick-release travel setup.
Why it ranks #2: The pull-cord lock supports travel use, while listed installation surfaces include single wood studs, concrete, and brick.
A pull-cord lock paired with quick release lets RV owners secure the TV for travel and extend it for viewing while parked. The USX MOUNT RV bracket supports TVs up to 44 pounds, with listed VESA patterns from 75x75mm to 200x200mm.
The 13–45-inch compatibility in the feature description and broad VESA range cover many camper television setups, while the 44-pound capacity accommodates heavier sets. Its pull-cord lock holds the TV steady on the road; quick release makes extension more convenient at camp. Installation is listed for single wood studs, concrete, or brick, but the wooden board in a vehicle must be thicker than 0.5 inch, an important constraint when planning the mounting location.
- Supports TVs up to 44 pounds
- Lists compatibility with screens from 13 to 45 inches
- Pull-cord locking system for travel
- Quick-release feature for extending the TV while parked
- Vehicle mounting board must be thicker than 0.5 inch.
Skip it if you cannot mount to a vehicle board thicker than 0.5 inch; VIVO MOUNT-VWRV1 is an option for a suitable 100x100mm setup.
This USX MOUNT suits RV owners who want a pull-cord travel restraint and quick release for parked viewing, with broad screen and VESA support. Check the vehicle board thickness before choosing an installation point.
Full product details
| Brand | USX MOUNT |
|---|---|
| Color | black |
| Compatible Devices | Monitor, Television |
| Enclosure Material | Metal |
| Manufacturer | X-MOUNT LIMITED |
| Material | Metal |
| Maximum-Supported Screen Size | 43 inches |
| Minimum-Supported Screen Size | 17 inches |
| Model Number | rv tv wall mount |
#3 · Dual-Plate Option
3. suptek Lockable RV Mount
- Material: Metal
- Compatible Devices: Television
- Maximum-Supported Screen Size: 42 in
Best for: Higher-capacity dual-plate mount.
Why it ranks #3: Its dual wall plates support relocating a compatible TV between indoor and outdoor areas, and its stated weight capacity is 44 pounds.
A 44-pound capacity paired with two wall plates makes the Suptek MA1342 useful for heavier compatible TVs that move between indoor and outdoor RV areas. Its full-motion locking design and listed VESA patterns through 200x200mm support a range of common television setups.
The dual plates enable relocation between viewing areas, while the quick-release description supports taking the TV off its mount when needed. The 44-pound limit is higher than mounts capped at 33 pounds, and the listed 75×75 through 200x200mm VESA patterns cover several common layouts. Screen compatibility is listed as 13–43 inches in the title and features; the specifications give a maximum-supported size of 42 inches, so that discrepancy merits attention.
- Supports TVs up to 44 pounds
- Includes two wall plates
- Quick-release TV mount
- Lists VESA patterns through 200x200mm
- Specifications list a 42-inch maximum screen size, while the title says 43 inches.
Skip it if you need a clearly specified 43-inch maximum; Mounting Dream MD2210 lists support up to 43 inches.
The Suptek MA1342 suits owners seeking dual-location flexibility and a 44-pound capacity for a compatible TV. Note the 42-inch maximum in its specifications versus 43 inches in its title before settling on a screen.
Full product details
| Brand | suptek |
|---|---|
| Color | Black |
| Compatible Devices | Television |
| Enclosure Material | Metal |
| Manufacturer | suptek |
| Material | Metal |
| Maximum-Supported Screen Size | 42 inches |
| Minimum-Supported Screen Size | 13 inches |
| Model Number | MA1342 |
Listed on Amazon as: Suptek Lockable RV TV Mount for 13-43 Inch TVs | Full Motion Locking Wall Mount for Camper, Trailer, Motorhome, Boat, Truck, Indoor and Outdoor, VESA 200mm, Supports 44lbs, Model MA1342
View on Amazon#4 · UL-Listed Lock
4. Mounting Dream MD2210
- Material: Metal
- Compatible Devices: Television
- Warranty Description: 10 years warranty
- Maximum-Supported Screen Size: 43 in
Best for: Locking for heavier TVs.
Why it ranks #4: This UL-listed mount supports TVs up to 44 pounds and uses a locking mechanism designed to secure the swivel arms and TV plate.
A one-action locking mechanism secures the swivel arms and TV plate together, giving RV owners a way to restrain the screen for travel. The Mounting Dream MD2210 supports TVs up to 44 pounds and 43 inches, with robot-welded construction and several common VESA patterns.
The 75×75 through 200x200mm VESA options cover many smaller and mid-size television mounting patterns, while the 44-pound capacity accommodates heavier sets than several 33-pound-capacity mounts. Its lock secures both the arms and TV plate at once, simplifying the travel-ready step. The listed pattern range does not include 100x200mm; the supplied information points owners of TVs with that pattern to Mounting Dream’s MD2212 instead.
- Supports TVs up to 44 pounds
- Fits screens from 17 to 43 inches
- Lock secures swivel arms and TV plate together
- Robot-welded construction
- Does not list compatibility with 100x200mm VESA patterns.
Skip it if you have a 100x200mm VESA television; Mounting Dream MD2212 is the model identified for that pattern.
Choose the Mounting Dream MD2210 if your 17–43-inch TV weighs no more than 44 pounds and you want a single lock to restrain both the arms and plate. Its listed VESA patterns exclude 100x200mm.
Full product details
| Brand | Mounting Dream |
|---|---|
| Color | Black |
| Compatible Devices | Television |
| Enclosure Material | Metal |
| Manufacturer | Mounting Dream |
| Material | Metal |
| Maximum-Supported Screen Size | 43 inches |
| Minimum-Supported Screen Size | 17 inches |
| Model Number | MD2210 |
| Warranty Description | 10 years warranty |
Listed on Amazon as: Mounting Dream UL Listed Lockable RV TV Mount for 17-43” TV up to 44lbs
View on Amazon#5 · Toothed Locking Arm
5. Mount-It! MI-429
- Material: Aluminum
- Compatible Devices: RVs, Mobile Homes
- Maximum-Supported Screen Size: 42 in
Best for: Indoor and outdoor TV transfer.
Why it ranks #5: Its toothed locking arm and dual wall plates serve buyers who want a fixed travel hold and indoor-to-outdoor TV relocation; capacity is 33 pounds.
Two wall plates let the Mount-It! MI-429 move between indoor and outdoor viewing spots, so one compatible TV can serve separate RV locations. Its aluminum construction and toothed locking arm address travel stability, while full-motion adjustment supports changing the viewing angle.
The toothed arm secures the joints against shifting and rattling on rough roads; the supplied guidance calls for tightening both the outer thumbscrew and inner Allen screw at each joint. Dual plates make transferring the TV between locations possible, and a slide-in TV plate eases attachment to the arms. Its supported VESA patterns run through 200x200mm, with a maximum load of 33 pounds and screen range of 22–42 inches.
- Dual wall plates for indoor and outdoor locations
- Toothed locking arm secures joints
- Aluminum construction
- Slide-in TV plate eases attachment
- Maximum supported TV weight is 33 pounds.
Skip it if you have a TV heavier than 33 pounds; Mounting Dream MD2210 supports up to 44 pounds.
The MI-429 fits RV owners who want to transfer a 22–42-inch TV between two viewing locations and secure its joints for travel. Its 33-pound limit and listed VESA patterns define the compatibility boundary.
Full product details
| Brand | Mount-It! |
|---|---|
| Color | Black |
| Compatible Devices | RVs, Mobile Homes |
| Enclosure Material | Aluminum |
| Manufacturer | Mount-It! |
| Material | Aluminum |
| Maximum-Supported Screen Size | 42 inches |
| Minimum-Supported Screen Size | 22 inches |
| Model Number | MI-429 |
| Additional Information | Important Information Visible screen diagonal 3" / 8 cm |
#6
6. Mount-It! MI-432
- Material: Aluminum
- Compatible Devices: Television
- Maximum-Supported Screen Size: 42 in
Best for: Detachable aluminum installation.
Why it ranks #6: The aluminum mount includes dual wall plates and a quick-release full-motion design, with support for televisions weighing less than 33 pounds.
Dual wall plates let the Mount-It! MI-432 move a compatible TV between indoor and outdoor positions, making it useful when one screen serves multiple RV viewing areas. Its aluminum construction, quick-release arrangement, and free-tilting swivel design support relocation and angle adjustment.
The detachable wall-plate setup allows the TV to be moved between locations rather than left at one fixed viewing point. A free-tilting swivel design helps adjust the view, and the supplied facts specify up to 30 degrees of tilt. VESA extension plates accommodate many TVs up to 42 inches and under 33 pounds; the weight ceiling is a key filter for owners comparing this mount with higher-capacity options.
- Dual wall plates for moving the TV
- Quick-release design
- Free-tilting swivel adjustment
- Aluminum construction
- Supports TVs weighing less than 33 pounds.
Skip it if you need capacity for a 44-pound TV; Suptek MA1342 lists support up to 44 pounds.
The MI-432 suits owners moving a lighter TV between indoor and outdoor RV viewing spots, with tilt adjustment for changing positions. Its stated under-33-pound capacity is the main boundary to check against your set.
Full product details
| Brand | Mount-It! |
|---|---|
| Color | Black |
| Compatible Devices | Television |
| Enclosure Material | Aluminum |
| Manufacturer | Mount-It! |
| Material | Aluminum |
| Maximum-Supported Screen Size | 42 inches |
| Minimum-Supported Screen Size | 13 inches |
| Model Number | MI-432 |
#7
7. MOUNTUP MU2101
- Material: Metal
- Compatible Devices: Television
- Warranty Description: 3 year
- Maximum-Supported Screen Size: 43 in
Best for: Wide-angle RV viewing.
Why it ranks #7: Its pull-cord lock pairs with up to 90-degree left-and-right swivel, and the mount fits listed VESA patterns through 200x200mm.
A 90-degree swivel to either side lets the MOUNTUP MU2101 redirect a TV toward different seating positions, while its pull-cord lock secures it for travel. The full-motion mount fits 13–43-inch TVs up to 33 pounds and lists VESA patterns through 200x200mm.
The stated 90-degree left-and-right swivel and tilt range of 5 degrees up and 15 degrees down give RV owners several ways to adjust the screen after parking. Its pull-cord lock addresses movement during travel, while the 75×75 through 200x200mm VESA patterns cover common layouts. At 33 pounds maximum, it is intended for lighter televisions than mounts with 44-pound capacities; confirm the TV’s weight and pattern against the listed range.
- Swivels up to 90 degrees left and right
- Tilts 5 degrees up and 15 degrees down
- Pull-cord locking mechanism
- Fits TVs from 13 to 43 inches
- Maximum supported TV weight is 33 pounds.
Skip it if you need to mount a TV heavier than 33 pounds; Perlegear PGLRVF2 supports up to 44 pounds.
Pick the MU2101 for a lighter RV TV when broad swivel and tilt adjustment matters for seating angles. Its 33-pound ceiling and VESA range through 200x200mm are the key fit limits.
Full product details
| Brand | MOUNTUP |
|---|---|
| Color | Black |
| Compatible Devices | Television |
| Enclosure Material | Metal |
| Manufacturer | MOUNTUP |
| Material | Metal |
| Maximum-Supported Screen Size | 43 inches |
| Minimum-Supported Screen Size | 13 inches |
| Warranty Description | 3 year |
#8
8. ELIVED Dual-Latch RV Mount
- Material: Metal
- Compatible Devices: Television
- Warranty Description: 10 Years Warranty
- Maximum-Supported Screen Size: 43 in
Best for: Dual-pin travel restraint.
Why it ranks #8: Two locking pins and a steel bracket address travel security; its listed 33-pound limit and VESA range through 200x200mm define compatibility.
Two locking pins form the ELIVED mount’s patented travel restraint, keeping a compatible TV stable on rough roads. Its heavy-duty steel construction supports screens from 13 to 43 inches and up to 33 pounds, with VESA compatibility from 75x75mm to 200x200mm.
The dual-pin lock is the defining travel feature, while the heavy-duty steel bracket is specified to resist vibration. Those details suit owners prioritizing a secured screen in a camper, trailer, camper van, or mobile home. The listed pattern range covers many common mounting layouts, but the 33-pound capacity narrows the choice for heavier televisions. Match the set’s weight and VESA pattern to those limits before installation.
- Patented locking mechanism uses two pins
- Heavy-duty steel construction
- Supports screens from 13 to 43 inches
- VESA patterns from 75x75mm to 200x200mm
- Maximum supported TV weight is 33 pounds.
Skip it if you have a TV above 33 pounds; Mounting Dream MD2210 supports sets up to 44 pounds.
ELIVED is a fit for RV owners who prioritize a dual-pin travel lock and steel construction for a TV weighing no more than 33 pounds. Its listed VESA range reaches 200x200mm.
Full product details
| Brand | ELIVED |
|---|---|
| Color | Black |
| Compatible Devices | Television |
| Enclosure Material | Metal |
| Manufacturer | ELIVED |
| Material | Metal |
| Maximum-Supported Screen Size | 43 inches |
| Minimum-Supported Screen Size | 13 inches |
| Warranty Description | 10 Years Warranty |
Listed on Amazon as: RV TV Wall Mount for 13-43" TVs, Patented Dual Latch Lockable for Camper
View on Amazon#9
9. VIVO Mount-TVQR1
- Material: Aluminum, Steel, Plastic
- Compatible Devices: Television
- Warranty Description: 3 Year Warranty
- Maximum-Supported Screen Size: 43 in
Best for: Quick TV relocation.
Why it ranks #9: Two mounting plates and a slide-in arm allow a compatible TV to move between locations; the stated maximum capacity is 33 pounds.
Two mounting plates and a slide-in wall plate make the VIVO MOUNT-TVQR1 a practical choice for moving one TV between indoor and outdoor locations. It supports 13–43-inch screens up to 33 pounds and lists four VESA patterns, including 200x200mm.
The two plates let a compatible television move between different locations, such as an RV and a covered patio, while the slide-in plate gives access for attachment and detachment. The listed hardware and instructions support the installation process, and standard wall mounting is also identified. Compatibility is limited to 33 pounds and the specified 75×75, 100×100, 200×100, or 200x200mm patterns, so check both before planning a transfer setup.
- Two plates support moving the TV between locations
- Slide-in wall plate aids attachment and detachment
- Fits screens from 13 to 43 inches
- Includes hardware and installation instructions
- Does not list support for 100x200mm VESA patterns.
Skip it if your TV uses 100x200mm VESA; Perlegear PGLRVF2 explicitly lists that pattern.
Choose the VIVO MOUNT-TVQR1 if you want quick-release transfer between an RV and another indoor or outdoor viewing area. Its 33-pound maximum and four listed VESA patterns set the compatibility limits.
Full product details
| Brand | VIVO |
|---|---|
| Color | Black |
| Compatible Devices | Television |
| Enclosure Material | Aluminum, Steel, Plastic |
| Item Weight | 3.8 pounds |
| Manufacturer | VIVO |
| Material | Aluminum, Steel, Plastic |
| Maximum-Supported Screen Size | 43 inches |
| Minimum-Supported Screen Size | 13 inches |
| Model Number | MOUNT-TVQR1 |
| Warranty Description | 3 Year Warranty |
Listed on Amazon as: VIVO Black Quick Release RV TV Wall Mount for 13-43 in Screens, Mount-TVQR1
View on Amazon#10
10. VIVO MOUNT-VWRV1
- Material: Plastic
- Compatible Devices: Television
- Warranty Description: 3 Year Warranty
- Maximum-Supported Screen Size: 43 in
Best for: Rust-free outdoor mounting.
Why it ranks #10: Its rust-resistant plastic polymer suits outdoor installation, but the listed VESA pattern is limited to 100x100mm and capacity to 30 pounds.
Its plastic-polymer construction will not rust or corrode when mounted outside a camper, making the VIVO MOUNT-VWRV1 a specific option for outdoor TV placement. The bracket supports screens up to 43 inches and 30 pounds, with a required 100x100mm VESA pattern.
The rust-free polymer construction suits exposed locations such as an RV exterior, food truck, or patio, where the supplied facts specifically identify corrosion resistance as a benefit. Its fit is comparatively narrow: the TV must use a 100x100mm VESA pattern and weigh no more than 30 pounds. Installation also requires a structure intended for wall-mount accessories, so the mounting surface matters as much as the television’s pattern and weight.
- Polymer bracket will not rust or corrode
- Suitable for outdoor RV, food truck, or patio use
- Supports screens up to 43 inches
- Includes a variety of mounting hardware
- Requires a 100x100mm VESA pattern and supports only 30 pounds.
Skip it if you need broader VESA or higher weight capacity; Perlegear PGLRVF2 supports up to 44 pounds and multiple patterns.
Choose the VIVO MOUNT-VWRV1 for an outdoor camper or patio installation when your screen uses 100x100mm VESA and weighs 30 pounds or less. The supporting wall structure must also be suitable for mounting accessories.
Full product details
| Brand | VIVO |
|---|---|
| Color | Black |
| Compatible Devices | Television |
| Enclosure Material | Plastic |
| Manufacturer | VIVO |
| Material | Plastic |
| Maximum-Supported Screen Size | 43 inches |
| Minimum-Supported Screen Size | 13 inches |
| Model Number | MOUNT-VWRV1 |
| Warranty Description | 3 Year Warranty |
Listed on Amazon as: VIVO RV TV Mount for Screens up to 43 in, Holds 30 lbs
View on AmazonAvoid the VESA and screen-size mismatch
The most preventable fit problem is choosing a mount based on screen size alone instead of checking all three compatibility points: screen size, TV weight, and VESA hole spacing. The products show why that matters: Perlegear lists patterns from 75x75mm through 200x200mm, while VIVO MOUNT-VWRV1 is specifically for 100x100mm. Mounting Dream MD2210 lists several patterns but directs buyers with a 100x200mm TV pattern to another model.
A TV within a mount’s stated size range can still fail to match its hole pattern or exceed its weight limit. Read the pattern as horizontal by vertical spacing, measure between the mounting holes, and compare it with the mount’s listed patterns.
Also reconcile differing ranges within a listing: some titles and specifications give different screen-size limits. When unclear, verify the exact model’s compatibility before purchase rather than assuming a broader title applies.
Plan for travel movement and mounting-surface failure
A travel lock cannot compensate for a mount attached to an unsuitable or weak RV wall. The listed designs include pull-cord locks, a toothed locking arm, and a dual-pin mechanism, but the products also make clear that installation conditions matter: USX MOUNT specifies a wood board thicker than 0.5 inch, and VIVO MOUNT-VWRV1 says to install on a structure designed for wall-mount accessories. Do not treat drywall or an unverified panel as adequate support.
Locate a suitable structural backing and use installation hardware appropriate to the surface. Follow the mount’s directions for securing the lock before driving; Mount-It!
MI-429 specifically advises tightening both its outer thumbscrew and inner Allen screw at each joint. If the installation or travel instructions do not address your setup, ask the manufacturer or a qualified installer rather than relying on the lock alone.
How to Choose an RV TV Mount
TV weight and screen-size limits
Choose a mount whose stated screen range and weight capacity both cover your television. The listings span capacities of 30 pounds for VIVO MOUNT-VWRV1, 33 pounds for several mounts, and 44 pounds for Perlegear Lockable RV Mount, USX MOUNT Lockable RV Mount, Mounting Dream MD2210, and suptek Lockable RV Mount. Stated screen ranges also vary: Perlegear lists 13–43 inches, while Mounting Dream lists 17–43 inches.
Some product titles and specification fields show different maximum screen sizes, so check the precise model details rather than relying on a title alone. Buyers with a heavier TV should favor a mount with a suitable higher weight limit; smaller, lighter screens may work with lower-capacity options if all other requirements match.
VESA pattern compatibility
Match the mount’s listed VESA pattern to the horizontal and vertical spacing of the holes on the back of your TV. Many options, including Perlegear Lockable RV Mount and suptek Lockable RV Mount, list patterns through 200x200mm and include 100x200mm. VIVO MOUNT-VWRV1, by contrast, is limited to 100x100mm, while Mounting Dream MD2210 lists several patterns but notes a different model for 100x200mm.
This variation can rule out an otherwise suitable mount. Check the TV manual or measure between the mounting holes, then compare that exact pattern with the product’s compatibility list.
A buyer whose television has a less common pattern should prioritize a mount that explicitly includes it rather than infer compatibility from screen size.
Locking and relocation features
Look for a travel lock that suits how you secure the screen, and decide whether you need to move the TV between locations. The options include Perlegear’s pull-cord lock, Mount-It! MI-429’s toothed locking arm, ELIVED’s two locking pins, and Mounting Dream MD2210’s mechanism that secures the arms and TV plate together.
suptek Lockable RV Mount and both Mount-It! models list dual wall plates for moving a compatible TV between indoor and outdoor positions.
That feature favors buyers who want one screen in multiple locations; a single-location setup may not need it. Locking designs differ, so follow each product’s instructions and confirm the mount is attached to a suitable structure. Do not assume that a lock removes the need to secure the mount properly before travel.
Which RV TV Mount Should You Choose?
For a broad VESA range, a pull-cord lock, and support up to 44 pounds, choose Perlegear Lockable RV Mount. If installation on a listed surface such as concrete or brick matters, consider USX MOUNT Lockable RV Mount, while verifying its exact model limits. For moving one TV between indoor and outdoor locations, suptek Lockable RV Mount includes dual wall plates and lists a 44-pound capacity.
Choose Mount-It! MI-429 if its toothed locking arm and dual plates suit your setup and your TV weighs no more than 33 pounds.
For an outdoor location where rust resistance is a priority and the TV uses 100x100mm VESA, VIVO MOUNT-VWRV1 is the specialized option. In every case, confirm the television’s weight, screen size, VESA pattern, and the RV wall’s structural suitability before installation.
Related Buying Guides
Frequently Asked Questions
How do I find my TV’s VESA pattern and weight before buying an RV mount?
Check your TV’s manual or manufacturer specifications for its VESA pattern and weight; the pattern is the spacing of the mounting holes on the back. Compare both figures with the mount’s listed limits before buying. Also confirm that your television’s screen size falls within the mount’s stated range.
Can an RV TV mount attach safely to any camper wall?
No. An RV wall may not provide suitable structural support at every location. Check the mount’s installation requirements, identify an appropriate structural mounting surface, and confirm that the supplied hardware is suitable.
If you cannot verify the wall’s suitability, consult a qualified installer before attaching a television.
Should I remove my television from the mount while driving?
Follow the mount and RV manufacturers’ instructions for travel. A locking mechanism can help secure a compatible mount, but it does not establish that every installation is safe on the road. Confirm that the television is firmly locked and cannot swing; remove it if the instructions call for removal or it cannot be secured.
What should I check before choosing a mount for indoor and outdoor TV use?
Check whether the mount includes plates for both intended locations and whether your television matches its size, weight, and VESA limits. The suptek listing specifies dual wall plates and a 44-pound capacity for moving one TV between indoor and outdoor locations. Verify that each mounting surface is suitable.
How do I choose between a pull-cord lock and other locking designs?
Choose a locking design that suits how you will secure and release the television, then verify its fit limits and installation requirements. This roundup includes pull-cord, toothed-arm, and dual-latch designs. Do not assume that a particular lock makes an unsuitable wall or an incompatible TV safe to mount.
Final Words
Start by matching your TV’s VESA pattern, weight, and screen size to a mount, then verify that the RV wall can support the installation. Perlegear is the overall choice for its pull-cord lock, broad VESA range, and 44-pound support. Consider USX MOUNT for a listed concrete or brick installation, suptek for dual plates, or another option when its specific locking design and limits suit your setup.
