A strong irrigation pump delivers enough flow and pressure for the sprinkler layout while matching the available water source and electrical supply. For larger systems, Goulds GT20 stands out with a listed maximum of 86 GPM at a 5-foot suction lift and 20 PSI; smaller gardens may suit a portable 1 HP pump instead. This roundup compares ten above-ground pumps, including dedicated sprinkler models, self-priming centrifugal pumps, and shallow-well options.
Their listed capacities range from 1,110 GPH to 86 GPM, but those figures come with different conditions, so they are not directly interchangeable. Check suction lift, head, pipe connections, and voltage alongside maximum flow.
The best fit depends on your system’s actual demand, water source, and whether you need a pump that can be moved between tasks.
Goulds GT20 is the leading choice for irrigation systems that need substantial water delivery: its listed capacity reaches 86 GPM at a 5-foot suction lift and 20 PSI, and it has 2 HP and 1 1/2-inch NPT suction and discharge connections. It is self-priming after initial priming and is also listed for lawn sprinkling and irrigation. Its 230-volt motor makes it a better fit where that supply is available than for buyers who need a 115-volt-only pump.
Our Top Picks
Best OverallIts 2 HP motor and listed capacity of up to 86 GPM at a 5-foot suction lift and 20 PSI suit demanding lawn sprinkling and irrigation.
View on Amazon
Best Sprinkler PumpThis dedicated 1.5 HP sprinkler pump lists up to 71 GPM at 10 PSI and 44 GPM at 30 PSI, with selectable 115/230-volt operation.
View on Amazon
Best Self-PrimingThe 1.5 HP centrifugal pump lists up to 64 GPM, a 5–25-foot suction lift, and dual 115/230-volt operation for irrigation transfer.
View on Amazon- Highest Listed Head AQUASTRONG SPRK150
Compare irrigation pump options and listed capabilities
| # | Product | Dimensions | Material | Voltage | Buy |
|---|---|---|---|---|---|
| 1 | 1. Goulds GT20Best Overall | 23.2"L x 10.5"W x 10.1"H | BUNA Elastomers, Cast Iron, Stainless Steel… | 230 V | View on Amazon |
| 2 | 2. Red Lion RL-SPRK150Best Sprinkler Pump | 21.85"L x 11.42"W x 10.2"H | Cast Iron, Thermoplastic | 115 V | View on Amazon |
| 3 | 3. Goulds GT15Best Self-Priming | 21.18"L x 8.25"W x 13.25"H | Cast Iron, Glass-filled noryl | 115 V | View on Amazon |
| 4 | 4. AQUASTRONG SPRK150Highest Listed Head | 22.8"L x 11.8"W x 12.4"H | Cast Iron | 115 V | View on Amazon |
| 5 | 5. WASSERMANN WAC15GT15-style shallow-well replacement | 13"L x 10"W x 22"H | BUNA Elastomers, Cast Iron, Stainless Steel… | 115 V | View on Amazon |
| 6 | 6. Flotec FP5172-08Corrosion-resistant sprinkler setups | — | Thermoplastic | 115 V | View on Amazon |
| 7 | 7. czobloik GT15Self-priming farm water transfer | — | — | — | View on Amazon |
| 8 | 8. AQUASTRONG PGAPortable shallow-well watering | 14.5"L x 8.5"W x 8.9"H | Stainless Steel | 115 V | View on Amazon |
| 9 | 9. VEVOR ZX11002Automatic pressure-boosting irrigation | 15"L x 9.4"W x 15.9"H | Aluminum, Stainless Steel | 115 V | View on Amazon |
| 10 | 10. LINGXIAO Relaax100-GPPortable garden irrigation | 13.94"L x 7.24"W x 11.42"H | Stainless Steel | 115 V | View on Amazon |
Detailed Reviews: Best Pumps For Irrigation Systems

#1 · Best Overall
1. Goulds GT20
- Dimensions: 23.2"L x 10.5"W x 10.1"H
- Material: BUNA Elastomers, Cast Iron, Stainless Steel…
- Voltage: 230 V
Best for: High-capacity 230-volt watering.
Why it ranks #1: Its 2 HP motor and listed capacity of up to 86 GPM at a 5-foot suction lift and 20 PSI suit demanding lawn sprinkling and irrigation.
A 2 HP motor and a stated capacity of up to 86 GPM at five feet of suction lift and 20 PSI make the Goulds GT20 a higher-capacity option for irrigation and water transfer. Its 230-volt, single-phase configuration sets a clear electrical requirement for prospective installations.
The self-priming design works after initial priming, which can simplify subsequent operation but still requires that first setup step. Matching 1-1/2-inch NPT suction and discharge connections give the installer a consistent pipe size on both sides. The pump is also listed for lawn sprinkling, irrigation, air-conditioning systems, heat pumps, water transfer, and dewatering, making it useful beyond a single watering task when its 230-volt supply and plumbing suit the site.
- 2 HP motor
- Up to 86 GPM at 5-foot suction lift and 20 PSI
- 1-1/2-inch NPT suction and discharge
- Listed for irrigation, water transfer, and dewatering
- Its 230-volt motor needs a compatible supply, limiting use where only 115 volts is available.
Skip it if you only have 115-volt power; the Red Lion RL-SPRK150 can be switched to 115 volts.
The GT20 suits a buyer with 230-volt power seeking a 2 HP pump for irrigation, transfer, or dewatering. Its quoted flow depends on the stated suction lift and pressure, and self-priming follows an initial priming step.
Full product details
| Brand | Goulds |
|---|---|
| Color | Blue |
| Included Components | GT20 |
| Dimensions | 23.2"L x 10.5"W x 10.1"H |
| Item Weight | 59 pounds |
| Manufacturer | GOULDS PUMPS |
| Part Number | GT20 |
| Material | BUNA Elastomers, Cast Iron, Stainless Steel, carbon, ceramic |
| Model Number | GT20 |
| Product Style | centrifugal pump |
| Style | centrifugal pump |
| Voltage | 230 volts |
Listed on Amazon as: GOULDS Pumps GT20 IRRI-Gator Self-Priming Single Phase Centrifugal Pump, 2 hp, Blue
View on Amazon
#2 · Best Sprinkler Pump
2. Red Lion RL-SPRK150
- Dimensions: 21.85"L x 11.42"W x 10.2"H
- Material: Cast Iron, Thermoplastic
- Voltage: 115 V
Best for: Dual-voltage sprinkler installations.
Why it ranks #2: This dedicated 1.5 HP sprinkler pump lists up to 71 GPM at 10 PSI and 44 GPM at 30 PSI, with selectable 115/230-volt operation.
The Red Lion RL-SPRK150 pairs a 1.5 HP motor with a switchable 115/230-volt configuration, giving installers a way to match the pump to either listed supply. Its maximum stated flow reaches 71 GPM at 10 PSI, making it relevant to residential or commercial lawn and turf sprinkler systems.
The factory setting is 230 volts, and the motor can be switched to 115 volts, so the installer needs to match the configuration to the available source. A one-time priming approach means no additional priming is required after the initial fill, simplifying later starts. The cast-iron housing and glass-filled thermoplastic impeller are specified for well or lake water, while the listed flow falls to 44 GPM at 30 PSI, an important system-planning distinction.
- 1.5 HP motor
- Switchable 115/230-volt operation
- Up to 71 GPM at 10 PSI
- No additional priming required after initial fill
- The pump requires an initial fill before its one-time priming operation.
Skip it if you need a pump that avoids an initial fill; the Goulds GT15 listing specifies self-priming performance.
This suits irrigation installers who can match its selectable voltage and want the stated 71-GPM flow at 10 PSI. Plan around the pressure-dependent flow figure and complete the initial fill; the pump is factory set to 230 volts.
Full product details
| Brand | Red Lion |
|---|---|
| Color | Red |
| Included Components | Installation manual, Pump with thermoplastic impeller |
| Dimensions | 21.85"L x 11.42"W x 10.2"H |
| Manufacturer | Franklin Electric Canada, Inc. |
| Part Number | 97101501 |
| Manufacturer Warranty Description | 2 year manufacturer |
| Material | Cast Iron, Thermoplastic |
| Model Number | 97101501 |
| Product Style | 1.5 HP, Thermoplastic Impeller, 115/230 Volt |
| Style | 1.5 HP, Thermoplastic Impeller, 115/230 Volt |
| Voltage | 115 volts |
| Additional Information | Important Information Wattage 7332 watts Bulb Voltage 115 volts Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Red Lion RL-SPRK150 Sprinkler/Irrigation Pump, 115/230V, 71 GPM, 1.5 HP
View on Amazon
#3 · Best Self-Priming
3. Goulds GT15
- Dimensions: 21.18"L x 8.25"W x 13.25"H
- Material: Cast Iron, Glass-filled noryl
- Voltage: 115 V
Best for: Dual-voltage GT15 irrigation.
Why it ranks #3: The 1.5 HP centrifugal pump lists up to 64 GPM, a 5–25-foot suction lift, and dual 115/230-volt operation for irrigation transfer.
A 5-to-25-foot suction-lift range paired with a listed flow of 64 to 39 GPM gives this Goulds GT15 a useful operating reference for shallow-water irrigation planning. Its 1.5 HP centrifugal design also offers 115/230-volt operation for installations with either listed supply.
The self-priming performance supports transfer applications, while the cast-iron casing and stainless-steel shaft identify key construction materials. Its stated maximum pressure is 125 PSI, and the flow figures vary with suction lift, so buyers should account for operating conditions rather than treat 64 GPM as universal. Single-phase, 60Hz operation and a 3,500 RPM speed help define electrical and motor requirements during installation planning.
- 1.5 HP centrifugal pump
- 115/230-volt operation
- Listed 64-to-39-GPM supply across 5-to-25-foot suction lift
- Cast-iron casing and stainless-steel shaft
- The listed flow falls from 64 to 39 GPM across the stated suction-lift range.
Skip it if you need a listed maximum flow above 64 GPM; the wassermann WAC15-WNDL15/56J lists 66 GPM.
This fits an irrigation buyer seeking a self-priming GT15 with dual-voltage operation and a stated suction-lift range. Match the electrical setup and size the system against the 39-to-64-GPM figures, which depend on suction lift.
Full product details
| Brand | Ozmosis |
|---|---|
| Color | Blue |
| Dimensions | 21.18"L x 8.25"W x 13.25"H |
| Item Weight | 60 pounds |
| Manufacturer | Goulds Water Technologies |
| Part Number | GT15 |
| Manufacturer Warranty Description | 1 Year |
| Material | Cast Iron, Glass-filled noryl |
| Model Number | GT15 |
| Product Style | Above Ground |
| Style | Above Ground |
| Voltage | 115 volts |
| Additional Information | Important Information Bulb Voltage 115 volts |
Listed on Amazon as: Goulds GT15 Irri-Gator Self-Priming Centrifugal Irrigation Sprinkler Pump, 1-1/2 HP, 115/230V, 1PH, 64 GPM, 60Hz, 1 Year Warranty
View on Amazon
#4 · Highest Listed Head
4. AQUASTRONG SPRK150
- Dimensions: 22.8"L x 11.8"W x 12.4"H
- Material: Cast Iron
- Voltage: 115 V
Best for: High-flow sprinkler systems.
Why it ranks #4: Its 1.5 HP cast-iron pump lists a maximum flow of 4,250 GPH and a 108-foot maximum head, with dual 115/230-volt styling.
A maximum flow of 4,250 GPH gives the AQUASTRONG 1.5 HP pump capacity for substantial lawn-watering demand. Its 2-inch NPT suction and 1-1/2-inch NPT discharge define the connection sizes, while a maximum head of 108 feet offers a useful reference when planning an irrigation layout.
The cast-iron construction suits buyers looking for a substantial above-ground pump body, and the reinforced impeller and diffuser are specified to support efficient water flow. The 115/230V designation gives installation flexibility, but the supplied information lists 115 volts in the specifications, so confirm the intended supply and wiring requirements before setup. With its 2-inch suction and 1-1/2-inch discharge, plumbing needs to match those ports; its 22.8-inch length also matters when allocating installation space.
- Maximum flow listed at 4,250 GPH
- Maximum head listed at 108 feet
- Reinforced impeller and diffuser
- 2-inch NPT suction and 1-1/2-inch NPT discharge
- Its 2-inch suction and 1-1/2-inch discharge require matching plumbing connections.
Skip it if you need a compact pump for frequent carrying; the listed dimensions are 22.8 by 11.8 by 12.4 inches.
For a fixed lawn-sprinkler or garden-irrigation setup needing the listed high flow, this AQUASTRONG is a candidate. Check available space, pipe sizes, and electrical supply carefully, particularly because the title lists dual voltage while specifications state 115 volts.
Full product details
| Brand | AQUASTRONG |
|---|---|
| Color | Black |
| Included Components | Centrifugal Pump |
| Dimensions | 22.8"L x 11.8"W x 12.4"H |
| Manufacturer | AQUASTRONG |
| Material | Cast Iron |
| Model Number | SPRK150 |
| Product Style | 1.5 HP 115/230V |
| Style | 1.5 HP 115/230V |
| Voltage | 115 volts |
| Additional Information | Important Information Bulb Voltage 115 volts |
Listed on Amazon as: AQUASTRONG 1.5 HP Shallow Well Jet/Centrifugal Pump, 4250 GPH, 115/230V, Durable Cast Iron Booster Pump for Lawn Sprinkler, Garden Irrigation
View on Amazon
#5
5. WASSERMANN WAC15
- Dimensions: 13"L x 10"W x 22"H
- Material: BUNA Elastomers, Cast Iron, Stainless Steel…
- Voltage: 115 V
Best for: GT15-style shallow-well replacement.
Why it ranks #5: A 1.5 HP, self-priming centrifugal pump with a listed 66 GPM flow, 126-foot maximum head, and dual-voltage flexibility for irrigation.
The WASSERMANN pump is explicitly presented as a replacement for the GOULDS GT15, giving buyers a named reference point when considering a 1.5 HP shallow-well irrigation pump. Its listed 66-GPM flow and 126-foot maximum head frame its intended use for shallow-well extraction and sprinkler watering.
Dual-voltage flexibility is listed for 115/230 volts, letting an installer plan around either specified supply, while the 66-GPM rating provides a flow reference for irrigation demand. The cast-iron construction and listed component materials include stainless steel, carbon, ceramic, and BUNA elastomers. Its maximum head of 126 feet supports layout planning, but connections and system requirements still need to match the installation. The product dimensions are 13 by 10 by 22 inches, useful when allocating space.
- 1.5 HP motor
- 66-GPM listed flow rate
- Maximum head of 126 feet
- 115/230-volt dual-voltage flexibility
- Its 66-GPM listed flow is below the Goulds GT20's stated maximum of 86 GPM under specified conditions.
Skip it if you need the higher stated flow for demanding transfer; the Goulds GT20 lists up to 86 GPM at 5-foot suction lift and 20 PSI.
This suits a buyer seeking a dual-voltage, 1.5 HP shallow-well pump with a named GT15 replacement reference. Check the intended plumbing and supply, and compare its 66-GPM rating with the irrigation system's actual flow needs.
Full product details
| Brand | wassermann |
|---|---|
| Color | Blue |
| Included Components | WAC15-WNDL15/56J pump |
| Dimensions | 13"L x 10"W x 22"H |
| Manufacturer | WASSERMANN |
| Manufacturer Warranty Description | 2 YEAR |
| Material | BUNA Elastomers, Cast Iron, Stainless Steel, carbon, ceramic |
| Model Number | WAC15-WNDL15/56J |
| Product Style | WAC15-WNDL15/56J |
| Style | WAC15-WNDL15/56J |
| Voltage | 115 volts |
| Additional Information | Important Information Bulb Voltage 115 volts |
Listed on Amazon as: Centrifugal Pump 1.5 HP, 66GPM Shallow Well Jet Pump 115V/230V Self-Priming Centrifugal Pump Durable Cast Iron Booster Pump for Lawn Sprinkler, Garden Irrigation, Replacement for GT15, Blue
View on Amazon
#6
6. Flotec FP5172-08
- Material: Thermoplastic
- Voltage: 115 V
Best for: Corrosion-resistant sprinkler setups.
Why it ranks #6: This self-priming 1.5 HP sprinkler pump lists up to 4,020 GPH and uses a corrosion-resistant fiberglass-reinforced thermoplastic housing.
A fiberglass-reinforced thermoplastic housing gives the Flotec sprinkler pump a corrosion-resistant construction detail for outdoor irrigation use. Its maximum flow is listed at 4,020 GPH, and its self-priming operation after the housing is initially filled can simplify startup for lawn watering and water-transfer applications.
The 1-1/2 HP pump is listed for lawn irrigation, sprinkler systems, and water transfer, so it can serve more than one outdoor watering task. Self-priming begins after the housing has been filled according to manufacturer instructions, an installation step to include in setup planning. The corrosion-resistant thermoplastic housing distinguishes its material from metal-bodied options, while the 115-volt specification defines the supply requirement. At 33 pounds, it is a substantial item to position and install.
- Maximum flow listed at 4,020 GPH
- 1-1/2 HP motor
- Self-priming after initial housing fill
- Fiberglass-reinforced thermoplastic housing
- The housing must be initially filled before self-priming operation.
Skip it if you need a pump that does not call for an initial housing fill; the Goulds GT15 is listed as self-priming.
For a 115-volt lawn or sprinkler system, this Flotec combines a stated 4,020-GPH maximum flow with thermoplastic housing. Account for the initial fill and its 33-pound weight when choosing the installation location and handling plan.
Full product details
| Brand | Factory Hardware Store |
|---|---|
| Color | Black |
| Included Components | Pump |
| Item Weight | 33 pounds |
| Manufacturer | Flotec |
| Material | Thermoplastic |
| Model Number | FP5172-08 |
| Product Style | Above Ground |
| Style | Above Ground |
| Voltage | 115 volts |
| Additional Information | Important Information Bulb Voltage 115 volts |
Listed on Amazon as: Flotec 1-1/2 HP Thermoplastic Sprinkler Pump, 4020 GPH Maximum Flow, Self-Priming Irrigation Pump, 115/230V, Corrosion-Resistant Housing
View on AmazonWhy it ranks #7: Its self-priming centrifugal design is described for garden, orchard, and farm irrigation, though the supplied specifications do not state flow or voltage.
Self-priming operation is the key practical feature of this 1.5 HP, 230-volt GT15-style centrifugal pump: after setup, it can draw water from ponds, tanks, or wells without manual priming. That makes it relevant to small farms, orchards, gardens, and livestock watering where water transfer is part of the routine.
The self-priming design is specified to support consistent flow without manual priming, simplifying startup for the listed pond, tank, and well sources. Its cast-iron protective casing provides a robust exterior, while standard inlet and outlet pipe connections help it join common plumbing arrangements. The product is identified as an above-ground pump and runs on 230 volts, so installation planning should account for that supply and the intended water source before connecting it to an irrigation system.
- Self-priming centrifugal design
- Can draw from ponds, tanks, or wells
- Cast-iron protective casing
- Standard inlet and outlet pipe connections
- Its listed 230-volt motor requires a compatible electrical supply.
Skip it if you only have a 115-volt supply; the LINGXIAO Relaax100-GP is listed for 115 volts.
This fits growers or livestock keepers seeking an above-ground self-priming pump for pond, tank, or well water transfer. Its 230-volt motor is a firm electrical requirement, so verify supply compatibility before planning the installation.
Full product details
| Brand | czobloik |
|---|---|
| Color | Blue |
| Included Components | Pump |
| Manufacturer | czobloik |
| Part Number | YCB-GT15 |
| Model Number | GT15 |
| Product Style | Above Ground |
| Style | Above Ground |
Listed on Amazon as: Fit for GT15 Self-Priming Centrifugal Pump,1.5HP Motor/230 Volts
View on Amazon
#8
8. AQUASTRONG PGA
- Dimensions: 14.5"L x 8.5"W x 8.9"H
- Material: Stainless Steel
- Voltage: 115 V
Best for: Portable shallow-well watering.
Why it ranks #8: This portable 115-volt pump lists 1,320 GPH at 5 feet of head, a 26-foot well depth, and an iron carry handle for moving between sites.
An iron carry handle makes this 1.6 HP AQUASTRONG notably portable for moving between lawns, gardens, and farms. Its stainless-steel casing and listed maximum suction depth of 26 feet add practical context for buyers transferring water from a shallow source to an irrigation or sprinkler setup.
The 115-volt pump lists a maximum flow of 1,320 GPH at five feet of head and a maximum head of 164 feet, two figures that help frame different operating conditions. Its stated suction capability reaches a well depth of 26 feet, so source placement matters. The carry handle supports transport between work areas, while the stainless-steel casing and aluminum motor housing provide specified material details for evaluating the pump's construction and installation environment.
- 1.6 HP motor
- Maximum flow of 1,320 GPH at 5 feet of head
- Listed well depth up to 26 feet
- Iron carry handle for transport
- The listed maximum flow is specified at 5 feet of head, not across all operating conditions.
Skip it if you need a stated 4,000-plus GPH maximum flow; the AQUASTRONG SPRK150 lists up to 4,250 GPH.
This is a fit for users moving a 115-volt pump among garden, lawn, or farm water-transfer tasks. Its handle aids carrying, but size the irrigation plan around the stated 1,320-GPH figure at five feet of head and the 26-foot well-depth limit.
Full product details
| Brand | AQUASTRONG |
|---|---|
| Color | 1.6 Hp Portable |
| Dimensions | 14.5"L x 8.5"W x 8.9"H |
| Manufacturer | AQUASTRONG |
| Part Number | PGA |
| Material | Stainless Steel |
| Model Number | PGA |
| Product Style | 1.6 HP Portable |
| Style | 1.6 HP Portable |
| Voltage | 115 volts |
| Additional Information | Important Information Bulb Voltage 115 volts |
Listed on Amazon as: Aquastrong 115V Shallow Well Garden Pump, Stainless Steel, 1320 GPH, Water Transfer Draining Irrigation Sprinkler Pump, for Lawn,Garden,1.6 HP Portable
View on Amazon
#9
9. VEVOR ZX11002
- Dimensions: 15"L x 9.4"W x 15.9"H
- Material: Aluminum, Stainless Steel
- Voltage: 115 V
Best for: Automatic pressure-boosting irrigation.
Why it ranks #9: The 1 HP shallow-well pump lists 23 GPM and 145 feet of maximum head, with an automatic controller and dry-run prevention for water transfer.
An electronic controller that supports automatic operation and prevents dry running distinguishes the VEVOR 1 HP shallow-well pump. With a stated maximum flow of 23 GPM and maximum head of 145 feet, it can suit garden irrigation or transfer while also offering pressure-boosting capability.
The 115-volt motor and included electronic controller give this pump an integrated setup for automatic operation, rather than requiring a separately listed controller. Dry-run prevention is specified as a controller function, which matters when managing water supply. Stainless steel and aluminum are listed materials, and the pump's 15-by-9.4-by-15.9-inch dimensions help with placement planning. Its 23-GPM maximum flow and 145-foot maximum head provide reference points, not a guarantee of those figures at every operating condition.
- Electronic controller for automatic operation
- Controller includes dry-run prevention
- Maximum flow listed at 23 GPM
- Maximum head listed at 145 feet
- Its maximum flow is 23 GPM, below the listed 64 GPM of the Goulds GT15.
Skip it if you need substantially higher listed flow for sprinklers; the Goulds GT15 lists up to 64 GPM across its stated suction-lift range.
This suits a buyer wanting automatic control and dry-run prevention for a 115-volt garden pump or pressure-boosting task. Keep its 23-GPM maximum flow in mind when matching it to sprinkler demand and water-transfer expectations.
Full product details
| Brand | VEVOR |
|---|---|
| Color | 1 Hp With Automatic Controller |
| Included Components | Shallow Well Pump,Electronic Controller,Cable |
| Dimensions | 15"L x 9.4"W x 15.9"H |
| Item Weight | 25.8 pounds |
| Manufacturer | VEVOR |
| Part Number | ZNKQJB-1HP |
| Material | Aluminum, Stainless Steel |
| Model Number | ZX11002 |
| Product Style | 1 HP with Automatic Controller |
| Style | 1 HP with Automatic Controller |
| Voltage | 115 volts |
| Additional Information | Important Information Wattage 1100 watts Bulb Voltage 115 volts |

#10
10. LINGXIAO Relaax100-GP
- Dimensions: 13.94"L x 7.24"W x 11.42"H
- Material: Stainless Steel
- Voltage: 115 V
Best for: Portable garden irrigation.
Why it ranks #10: This stainless-steel 115-volt garden pump lists 1,110 GPH and a 29.5-foot maximum suction lift, but its stated flow is lower than other options.
A stainless-steel pump casing, motor housing, cover, and shaft distinguish this 1 HP LINGXIAO for buyers who want corrosion-resistant construction across multiple pump components. Its listed maximum suction lift of 29.5 feet and maximum head of 141 feet help frame whether a garden or lawn water-transfer layout suits its reach.
The 115-volt, 10-amp motor specification gives homeowners a defined electrical requirement, while maximum flow of 1,110 GPH sets a practical reference for irrigation planning. A maximum suction lift of 29.5 feet supports use with a shallow source within that limit, and maximum head of 141 feet describes its stated vertical capability. Included 1-inch NPT-to-3/4-inch garden-hose adapters offer a route to hose connections, and the 13.94-inch length aids space planning.
- Stainless-steel casing, motor housing, cover, and shaft
- Maximum flow listed at 1,110 GPH
- Maximum suction lift of 29.5 feet
- Includes two 1-inch NPT to 3/4-inch garden-hose adapters
- Its 1,110 GPH maximum flow is lower than the listed 4,020 GPH Flotec FP5172-08.
Skip it if you need the higher listed flow for a larger sprinkler setup; the Flotec FP5172-08 lists up to 4,020 GPH.
Choose this for garden irrigation or water transfer where 115-volt power, included hose adapters, and stainless-steel pump components suit the setup. Keep the 29.5-foot suction-lift and 1,110-GPH maximum flow figures in view when sizing the system.
Full product details
| Brand | LINGXIAO |
|---|---|
| Color | Blue & Silver |
| Included Components | 2PCS 1" NPT to 3/4" Garden Hose Adapters |
| Dimensions | 13.94"L x 7.24"W x 11.42"H |
| Item Weight | 10 kg |
| Manufacturer | LX |
| Part Number | Relaax100-GP |
| Manufacturer Warranty Description | 2-Year Warranty |
| Material | Stainless Steel |
| Model Number | Relaax100-GP |
| Product Style | Garden Irrigation Pump |
| Style | Garden Irrigation Pump |
| Voltage | 115 volts |
| Additional Information | Important Information Wattage 750 watts Bulb Voltage 115 volts |
Listed on Amazon as: 1HP Irrigation Pump, 1110 GPH, Stainless Steel Shallow Well Pump, 115V, 141 FT Height, Portable Sprinkler Pumps for Garden Lawn Farm Irrigation System, Transfer Water
View on AmazonWhy priming and suction details matter
Priming and suction setup can determine whether an above-ground pump starts moving water reliably. Red Lion RL-SPRK150 specifies one-time priming after an initial fill, while Goulds GT20 says it is self-priming after initial priming; neither description means the pump can run dry or start without following its manual. Goulds GT15 lists a 5–25-foot suction lift, and LINGXIAO Relaax100-GP lists a 29.5-foot maximum suction lift.
Those limits describe the lift from the water source, not the distance water can be pushed through the irrigation network. Keep the pump near the source where practical, use a compatible suction line, and follow the manufacturer’s priming instructions.
A pump that cannot maintain its prime may fail to deliver water even if its advertised maximum flow appears ample.
Check the connection and voltage before choosing
A pump’s headline capacity does not guarantee that it will connect cleanly to an existing irrigation system. Goulds GT20 lists 1 1/2-inch NPT suction and discharge connections, while AQUASTRONG SPRK150 specifies a 2-inch NPT suction and 1 1/2-inch NPT discharge. The LINGXIAO package includes adapters from 1-inch NPT to 3/4-inch garden hose, a different connection setup suited to hose-based use.
Confirm your pipe size and fitting type before selecting a pump; adapters do not establish that a line can carry the flow a pump advertises. Electrical supply is another compatibility check: Goulds GT20 is listed at 230 volts, whereas several pumps offer 115/230-volt configurations.
Match the pump’s wiring and voltage to the actual supply, following its instructions rather than assuming dual-voltage models arrive set for your circuit.
How to Choose an Irrigation Pump
Flow and pressure for your zones
Look for a pump whose stated flow and pressure fit the sprinklers running at the same time, rather than choosing by horsepower alone. Goulds GT20 lists up to 86 GPM at a 5-foot suction lift and 20 PSI; Red Lion RL-SPRK150 lists 71 GPM at 10 PSI and 44 GPM at 30 PSI. Those are different operating conditions, so do not compare the maximum figures as if they were measured alike.
Smaller options include VEVOR ZX11002 at 23 GPM and LINGXIAO Relaax100-GP at 1,110 GPH. Larger sprinkler zones favor the higher-capacity models, while a small garden or limited-demand setup may be better served by a lower-flow pump.
Check the performance information for your system’s required pressure before deciding.
Match voltage to the available supply
Choose a pump only after confirming the voltage your installation can provide and the model’s wiring configuration. Goulds GT20 is listed as 230 volts, while AQUASTRONG SPRK150, Red Lion RL-SPRK150, and Goulds GT15 list 115/230-volt operation. LINGXIAO Relaax100-GP and VEVOR ZX11002 are listed at 115 volts.
Dual-voltage models offer more flexibility, but the supplied Red Lion information says it is factory-set at 230 volts and can be switched to 115 volts. For an existing 230-volt setup, Goulds GT20 is a direct candidate; for a 115-volt supply, prioritize models listed for that voltage and confirm the required circuit and wiring in the manual.
Never assume a dual-voltage pump is configured for your supply out of the box.
Select construction for the installation
Choose construction with the pump’s location and handling in mind, and verify the material rather than relying on a broad durability claim. Goulds GT20 and AQUASTRONG SPRK150 list cast-iron construction; Red Lion RL-SPRK150 combines a cast-iron housing with a thermoplastic impeller. Flotec FP5172-08 uses fiberglass-reinforced thermoplastic housing, while LINGXIAO Relaax100-GP lists stainless steel for its casing, motor housing, cover, and shaft.
AQUASTRONG PGA is a portable option with stainless-steel casing, an aluminum motor housing, and a carry handle. A fixed installation can favor a larger cast-iron pump, while someone moving a pump around a garden may prefer a portable design.
Check the full materials and installation instructions for the specific unit and water source.
Which Irrigation Pump Fits Your Setup?
For a high-demand sprinkler system with a 230-volt supply, choose Goulds GT20: it has 2 HP and lists up to 86 GPM under stated conditions. If you want a dedicated sprinkler pump with dual-voltage flexibility, Red Lion RL-SPRK150 lists 71 GPM at 10 PSI and 44 GPM at 30 PSI. For a self-priming 1.5 HP option with dual voltage and a 64 GPM listing, Goulds GT15 is a strong alternative.
A garden installation needing a portable 115-volt pump may fit AQUASTRONG PGA, while hose connections are included with LINGXIAO Relaax100-GP. Choose VEVOR ZX11002 if its automatic controller and dry-run prevention suit your water-transfer setup.
Before buying, compare the listed operating conditions with your zone requirements and verify suction, fittings, and electrical compatibility.
Related Buying Guides
Frequently Asked Questions
How do I calculate the flow and pressure my sprinkler zones need?
Add the flow requirements of every sprinkler head that will run in one zone to estimate its total flow. Check the head manufacturer’s required operating pressure, then account for pressure losses through pipes, fittings, elevation changes, and the pump’s suction conditions. Compare those needs with pump performance at the relevant operating point.
How should I prime an above-ground irrigation pump before starting it?
Follow the pump manual’s priming procedure before starting. Typically, an above-ground self-priming pump must have its casing filled with water initially, and the suction line must be sealed and supplied from the water source. Confirm the pump is primed before operation; do not run it dry unless its instructions explicitly allow it.
What pipe size and electrical circuit should I use for an irrigation pump?
Choose pipework that matches the pump’s connection sizes and the required flow, and verify suction-side requirements in its manual. The electrical supply must match the pump’s voltage and motor requirements. For example, the listed Goulds GT20 has 1 1/2-inch NPT suction and discharge connections and a 230-volt motor; confirm circuit details with its instructions or a qualified electrician.
How should I compare a pump’s listed flow with my sprinkler needs?
Compare flow figures only at their stated operating conditions, including pressure and suction lift when provided. A maximum or headline flow figure may not describe output at the pressure your sprinkler zones require. Check the pump’s performance information against each zone’s flow and pressure needs before selecting a model.
How do I choose between a 115-volt and dual-voltage pump?
First verify which supply is available at the installation and whether it matches the pump’s listed voltage configuration. A dual-voltage listing can suit more than one supply arrangement, but confirm its wiring requirements before installation. The Goulds GT20 is listed as 230 volts, so it is not the fit for a 115-volt-only location.
Final Words
For substantial irrigation demand, choose the Goulds GT20 when a 230-volt supply is available and its listed operating conditions match your zones. Consider the Red Lion RL-SPRK150 for dedicated sprinkling with dual-voltage flexibility, or the Goulds GT15 for a self-priming alternative. For any option, verify zone flow and pressure, suction conditions, fittings, and electrical compatibility before purchase.


