A strong non-skid additive for gelcoat should mix into a compatible coating and create the level of deck traction you need, from subtle texture to aggressive grip. For wet boat decks and other high-traffic marine areas, Fasco Epoxies Coarse Fas-Grip is a leading option because its listed compatibility includes gelcoat and its coarse particles target wet, slippery surfaces. Fasco Epoxies Fine Fas-Grip is the alternative when a less aggressive feel is preferred.
Awlgrip Griptex products offer marine-deck context, while Rust-Oleum Marine Clear Anti-Slip Additive lists fiberglass among its compatible surfaces but specifies mixing with latex or oil-based paint. The products below differ in grit, coating compatibility, form, and intended surface, so check the label and application instructions before mixing any additive into gelcoat.
Fasco Epoxies Coarse Fas-Grip is the strongest match for buyers seeking the Best Non Skid Additive For Gelcoat. Its listed compatibility includes gelcoat, and its coarse particles are described as providing aggressive traction on wet, slippery, high-traffic surfaces such as boat decks and swim platforms. Choose Fasco Epoxies Fine Fas-Grip instead if you want a subtler texture.
Confirm the product’s mixing directions and suitability for your specific gelcoat system before application.
Our Top Picks
Best OverallIts listed compatibility includes gelcoat, and coarse particles target wet, slippery boat decks and other high-traffic surfaces needing aggressive traction.
View on Amazon
Best Fine TextureIt is listed for gelcoat and offers fine-grade particles for a more subtle, uniform texture than the coarse Fas-Grip option.
View on Amazon
Best Marine PolymerThis polymer-bead aggregate is intended for non-skid deck and step areas when mixed with an Awlgrip topcoat.
View on Amazon- Best Fiberglass Listing Rust-Oleum Marine Anti-Slip
Compare Non-Skid Additives by Texture and Intended Use
| # | Product | Form | Size | Weight | Buy |
|---|---|---|---|---|---|
| 1 | 1. Fasco Epoxies Coarse Fas-GripBest Overall | Liquid | 32 Fl Oz (Pack of 1) | — | View on Amazon |
| 2 | 2. Fasco Epoxies Fine Fas-GripBest Fine Texture | Liquid | 32 Fl Oz (Pack of 1) | — | View on Amazon |
| 3 | 3. Awlgrip Griptex QuartBest Marine Polymer | Paste | — | 16 oz | View on Amazon |
| 4 | 4. Rust-Oleum Marine Anti-SlipBest Fiberglass Listing | Liquid | 8 Fl Oz (Pack of 1) | 4 oz | View on Amazon |
| 5 | 5. Awlgrip Griptex Coarse GallonGallon-size Griptex additive | — | — | — | View on Amazon |
| 6 | 6. H&C SharkgripOne-pound Sharkgrip additive | — | One Size | 16 oz | View on Amazon |
| 7 | 7. Zinsser Skid-TexInterior and exterior floor paint | — | 1 lb (Pack of 1) | 1.2 lb | View on Amazon |
| 8 | 8. Homax Tread-TexTwo-pack Tread-Tex quantity | — | — | 1.94 lb | View on Amazon |
| 9 | 9. Bondex Skid-TexRoller or brush floor coatings | — | — | 2.5 lb | View on Amazon |
| 10 | 10. Bon Gator GripFine polymer additive for concrete | Liquid | — | — | View on Amazon |
Detailed Reviews: Best Non Skid Additive For Gelcoat

#1 · Best Overall
1. Fasco Epoxies Coarse Fas-Grip
- Form: Liquid
- Size: 32 Fl Oz (Pack of 1)
Best for: Coarse grit for wet decks.
Why it ranks #1: Its listed compatibility includes gelcoat, and coarse particles target wet, slippery boat decks and other high-traffic surfaces needing aggressive traction.
Large-particle coarse grit gives this Fasco Epoxies additive an aggressive non-skid texture, making it the more traction-focused choice for wet gelcoat decks and other slippery, heavily used surfaces. It mixes into gelcoat and several other coating types, so buyers can add footing during the coating workflow rather than treating it as a separate surface layer.
The coarse particle size is intended for wet, slippery, or high-traffic areas where sure footing is critical, including boat decks, swim platforms, docks, steps, and ramps. Fasco lists compatibility with gelcoat, epoxy, polyurethane, and marine or industrial paints, which makes the additive relevant to varied coating projects. The supplied facts also say it stirs into most coatings without changing workflow and holds traction when surfaces are wet or oily, a useful match for marine exposure.
- Large particles create an aggressive non-skid texture.
- Specified for wet, slippery, high-traffic surfaces.
- Mixes into gelcoat, epoxy, polyurethane, and marine or industrial paints.
- Listed for decks, swim platforms, docks, steps, ramps, and ladders.
- Its aggressive coarse texture is not the right choice where a subtle feel underfoot is the priority.
Skip it if you want a restrained texture rather than large-particle grit; Fasco Epoxies Fas-Grip Fine is the better fit for a subtler finish.
Pick the coarse Fasco grade for gelcoat decks, docks, and swim platforms where wet-weather grip takes priority. It suits demanding footing areas, while its aggressive texture may be too pronounced for buyers seeking a fine, subtle surface.
Full product details
| Brand | Fasco Epoxies |
|---|---|
| Color | Grey |
| Color Code | #808080 |
| Container Type | Pail |
| Included Components | Pressure Pot with Agitator, Syphon Gun |
| Item Form | Liquid |
| Item Volume | 1 quarts |
| Manufacturer | Fasco Epoxies Inc. |
| Model Number | 4333814902 |
| Size | 32 Fl Oz (Pack of 1) |
| Special Feature | Non Slip |
| Special Features | Non Slip |
Listed on Amazon as: Fasco Epoxies Non-Skid Paint Additive – Quart for 5 gallons – COARSE Anti-slip Particles Fas-Grip
View on Amazon
#2 · Best Fine Texture
2. Fasco Epoxies Fine Fas-Grip
- Form: Liquid
- Size: 32 Fl Oz (Pack of 1)
Best for: Fine texture for gelcoat decks.
Why it ranks #2: It is listed for gelcoat and offers fine-grade particles for a more subtle, uniform texture than the coarse Fas-Grip option.
Fine-grade anti-skid particles give this Fasco Epoxies additive a subtler, more uniform texture than an aggressive grit, helping add footing without a sharp feel underfoot. It mixes into gelcoat and other listed coatings, making it a practical option for boat decks, steps, and swim platforms where traction and walking comfort both matter.
The fine particle grade is the key fit for surfaces where coarse grit would feel too aggressive; the supplied description specifically calls out a subtle, uniform texture. Compatibility with gelcoat, epoxy, polyurethane, and marine paints gives it flexibility across coating workflows. Fasco also describes the additive as stirring into most coatings without changing the workflow, so it can be incorporated during coating preparation. Its stated marine uses include decks, steps, and swim platforms, while other listed applications include ramps and walkways.
- Fine-grade particles create a subtle, uniform texture.
- Described as avoiding a sharp feel underfoot.
- Mixes with gelcoat, epoxy, polyurethane, and marine paints.
- Listed for decks, steps, swim platforms, ramps, and walkways.
- The fine-grade texture is less aggressive than the coarse option for maximum-traction areas.
Skip it if you need the most aggressive listed particle texture for wet, high-traffic footing; Fasco Epoxies Fas-Grip Coarse is the better match.
Choose this Fasco additive for gelcoat boat areas where a more restrained texture is preferred, including decks and steps. Its fine grade suits comfort-conscious footing, but buyers prioritizing aggressive traction should consider the coarse grade.
Full product details
| Brand | Fasco Epoxies |
|---|---|
| Container Type | Can |
| Item Form | Liquid |
| Item Volume | 10 fluid ounces |
| Manufacturer | Fasco Epoxies Inc. |
| Size | 32 Fl Oz (Pack of 1) |
| Special Feature | Fast-Drying |
| Special Features | Fast-Drying |
Listed on Amazon as: Non-Skid Paint Additive – Quart for 5 gallons – FINE Anti-Slip Particles Fas-Grip
View on Amazon
#3 · Best Marine Polymer
3. Awlgrip Griptex Quart
- Form: Paste
- Weight: 16 oz
Best for: Awlgrip topcoat deck applications.
Why it ranks #3: This polymer-bead aggregate is intended for non-skid deck and step areas when mixed with an Awlgrip topcoat.
Polymer bead aggregate gives Awlgrip Griptex a defined additive form for creating non-skid deck and step areas when mixed with an Awlgrip topcoat. The listing also says it can be applied by spray, giving Awlgrip coating users an application route to consider for marine surfaces where a textured finish is needed.
This Griptex additive is described as polymer bead aggregate, and its stated purpose is non-skid deck and step areas when mixed with an Awlgrip topcoat. That pairing makes the product most clearly suited to projects already using that coating system rather than a general-purpose mix. Spray application is also listed, which may suit a buyer planning to apply the textured finish by spray. Its specifications identify a paste form and polymer material, useful details when planning handling and application.
- Polymer bead aggregate supplies the stated non-skid additive material.
- Specified for deck and step areas.
- Intended to mix with an Awlgrip topcoat.
- Listing says it can be applied by spray.
- Its stated coating pairing is an Awlgrip topcoat, limiting the documented fit for other coating systems.
Skip it if you are using a coating other than Awlgrip and need documented compatibility; Rust-Oleum Marine Clear lists latex- and oil-based paints.
Awlgrip users planning non-skid deck or step areas can consider Griptex, particularly when spray application suits the job. The documented pairing is with an Awlgrip topcoat, so verify that this matches the coating system for the project.
Full product details
| Brand | Awlgrip |
|---|---|
| Compatible Material | Wood, Metal, Concrete |
| Item Form | Paste |
| Item Weight | 16 ounces |
| Manufacturer | Awlgrip, N.A. |
| Material | Polymer |
| Model | 7301244 |
| Style | Compact |
| Style Name | Compact |
Listed on Amazon as: Awlgrip, N.A. Griptex Non-Skid Additive Quart
View on Amazon
#4 · Best Fiberglass Listing
4. Rust-Oleum Marine Anti-Slip
- Form: Liquid
- Size: 8 Fl Oz (Pack of 1)
- Weight: 4 oz
Best for: Clear additive for marine paint.
Why it ranks #4: Its listed compatible surfaces include fiberglass, and its pumice additive makes a slight texture in latex or oil-based paints.
A clear pumice additive that does not change paint color makes Rust-Oleum Marine Anti-Slip a useful option when the coating's existing appearance matters. Mixed with latex or oil-based paints, it creates a slightly textured skid-resistant finish on listed materials including fiberglass, wood, metal, and concrete.
The pumice material adds slight texture while the product is specified to maintain the coverage of the applied paint and remain active for the coating's lifetime. Its stated compatibility with latex and oil-based paints gives it two paint bases to work with, and the listing names wood, metal, fiberglass, and concrete surfaces. For gelcoat projects, fiberglass is listed as a surface, but the specified mixing instructions refer to paints; buyers should distinguish surface compatibility from coating compatibility.
- Clear additive is stated not to change paint color.
- Pumice adds slight texture for skid resistance.
- Specified for latex- and oil-based paints.
- Lists fiberglass, wood, metal, and concrete surfaces.
- The stated mixing bases are latex or oil-based paints, not gelcoat itself.
Skip it if you need an additive explicitly listed for mixing into gelcoat; Fasco Epoxies Fas-Grip Fine names gelcoat compatibility.
Rust-Oleum Marine Anti-Slip suits buyers adding subtle texture to paint on fiberglass or other listed surfaces while preserving paint color. For a gelcoat mix, its paint-based instructions leave an important compatibility boundary to resolve first.
Full product details
| Brand | Rust-Oleum |
|---|---|
| Color | Clear |
| Color Code | 000000 |
| Container Type | Bottle |
| Included Components | Acrylic |
| Item Form | Liquid |
| Item Volume | 4 fluid ounces |
| Item Weight | 4 ounces |
| Manufacturer | Rust-Oleum |
| Model | Rust-Oleum 207009 Marine Anti-Slip Additive 1/2-Pint |
| Model Number | 207009 |
| Size | 8 Fl Oz (Pack of 1) |
| Special Feature | Non Slip |
| Special Features | Non Slip |
Listed on Amazon as: Rust-Oleum Marine Clear Anti-Slip Additive
View on AmazonWhy it ranks #5: The product is identified as a coarse-grit anti-slip additive, but the supplied details do not specify compatible coatings or gelcoat use.
A gallon-size listing sets this Awlgrip Griptex apart for buyers seeking a larger stated quantity of non-skid additive. The supplied information identifies it as coarse grit anti-slip additive, but provides no further coating compatibility, application method, or surface guidance to establish how it fits a specific gelcoat project.
Awlgrip identifies the product as Griptex coarse grit anti-slip additive and specifies a gallon quantity. The coarse-grit description signals its stated texture category, while the larger package quantity may be relevant when planning a project requiring more additive. However, the supplied facts do not specify whether it mixes with gelcoat, which coatings it supports, or how to apply it. Check the product directions for compatibility and handling before selecting it for a marine surface.
- Identified as Awlgrip Griptex anti-slip additive.
- Coarse grit is specified.
- Gallon quantity is listed.
- Product brand and Griptex line are clearly identified.
- The supplied details do not specify gelcoat compatibility or application instructions.
Skip it if you need explicit instructions for mixing an additive into gelcoat; Fasco Epoxies Fas-Grip Coarse lists that compatibility.
Consider this Awlgrip Griptex option when its coarse-grit description and gallon quantity match the project plan. The supplied details do not establish gelcoat compatibility or application steps, so verify both before using it on a boat.
Full product details
| Brand | Awlgrip |
|---|
Listed on Amazon as: Awlgrip 73013G Griptex Coarse Grit Non-Skid Additive Gallon
View on AmazonWhy it ranks #6: This slip-resistant additive is listed as a 1-pound product, but the supplied details do not identify gelcoat compatibility or marine use.
A one-pound package distinguishes this H&C Sharkgrip slip-resistant additive, giving buyers a clearly identified quantity for a coating project. The supplied listing names it as a slip-resistant additive but provides few application or compatibility details, so its strongest fit is shoppers who recognize the Sharkgrip product and can verify the coating instructions before use.
H&C identifies this item as Sharkgrip Slip-resistant Additive, with a listed size of one pound and a material described as a blend. Those details establish its product type and package quantity, but the supplied information does not name compatible coatings, surface materials, application methods, or particle texture. That makes project planning less straightforward than for additives with explicit gelcoat guidance. Confirm that the product's own directions suit the intended coating before incorporating it into a marine finish.
- Identified as a slip-resistant additive.
- Named Sharkgrip product from H&C.
- Listed one-pound size provides a stated package quantity.
- Material is identified as a blend.
- The supplied details do not specify gelcoat compatibility, texture, or application directions.
Skip it if you need explicitly documented gelcoat compatibility and application guidance; Fasco Epoxies Fas-Grip Fine lists both.
Consider H&C Sharkgrip if you are seeking this specifically named slip-resistant additive and can consult its product directions. The listing establishes its identity and one-pound size, but does not provide the gelcoat-fit details needed for an informed application plan.
Full product details
| Brand | H&C |
|---|---|
| Color | Multicolor |
| Included Components | Other Items 16 oz. |
| Item Weight | 16 ounces |
| Item model number | 50.155005-99 |
| Manufacturer | H&C |
| Material | Blend |
| Dimensions | 1 x 1 x 1 inches |
| Size | One Size |
Listed on Amazon as: H&C 50.155005 Sharkgrip Slip-resistant Additive 1-LB
View on Amazon
#7
7. Zinsser Skid-Tex
- Size: 1 lb (Pack of 1)
- Weight: 1.2 lb
Best for: Interior and exterior floor paint.
Why it ranks #7: It is an easy-to-use additive for interior and exterior floor paints, but its listed application does not establish gelcoat compatibility.
Use in both interior and exterior floor paints is the clearest distinction of Zinsser Skid-Tex, making it a straightforward candidate for paint projects that need added slip resistance across indoor and outdoor surfaces. The listing describes it as easy to use and intended to help prevent slips and falls.
Zinsser identifies Skid-Tex as a non-skid additive for paint, with use in interior and exterior floor paints specifically stated. That makes the product relevant to floor coating projects on either side of the home, rather than limiting its listed use to a single setting. The one-pound size gives buyers a stated package quantity for planning. The supplied information does not name compatible paint chemistries or gelcoat, so marine coating users should check the product directions before choosing it.
- Listed for interior floor paints.
- Listed for exterior floor paints.
- Identified as a non-skid additive for paint.
- Easy-to-use application is stated in the listing.
- The supplied details do not establish compatibility with gelcoat or specific paint chemistries.
Skip it if you need named gelcoat compatibility for a boat project; Fasco Epoxies Fas-Grip Fine explicitly lists gelcoat.
Choose Zinsser Skid-Tex for paint-based interior or exterior floor projects where its stated slip-resistance purpose fits. For gelcoat work, the available listing lacks explicit compatibility details, so confirm its directions before using it on a marine finish.
Full product details
| Brand | Zinsser |
|---|---|
| Color | Clear |
| Included Components | 1 lb. Non-Skid Paint Additive |
| Item Weight | 1.2 pounds |
| Item model number | 22242 |
| Manufacturer | Rust-Oleum Corporation |
| Material | solid |
| Dimensions | 3 x 3 x 4 inches |
| Size | 1 Pound (Pack of 1) |
| Special Features | special_feature |
| Warranty Description | Satisfaction Guaranteed |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: 1 lb Zinsser ST30 Zinsser, Skid-Tex Non-Skid Additive
View on AmazonWhy it ranks #8: The listing identifies an anti-skid paint additive in a 16-ounce pack, without supplied details confirming marine use or gelcoat compatibility.
The two-pack format is the clearest practical feature of Homax Tread-Tex, supplying two 16-ounce units of its anti-skid paint additive. The listing identifies the product as paint additive but offers little further detail about compatible coatings, surface types, or texture, so buyers should use the product directions to assess a gelcoat project.
Homax names this product Anti-Skid Paint Additive, Tread-Tex, and lists a pack of two with 16 ounces per unit. That quantity can help buyers plan how much packaged additive they will have available, although the supplied facts do not specify coverage or mixing ratios. No gelcoat compatibility, particle description, or application method is provided in the listing details here. For marine use, consult the product's directions to determine whether the intended coating and application are supported.
- Identified as an anti-skid paint additive.
- Tread-Tex product name is specified.
- Pack includes two units.
- Each unit is listed as 16 ounces.
- The supplied listing does not specify gelcoat compatibility, texture, or mixing ratio.
Skip it if you need published gelcoat compatibility and a mixing ratio; Fasco Epoxies Fas-Grip Coarse lists gelcoat use.
Homax Tread-Tex may suit buyers who want the identified two-pack quantity of paint additive and can consult its directions for application details. The supplied listing does not establish gelcoat fit, so marine buyers should verify compatibility before proceeding.
Full product details
| Brand | Homax |
|---|---|
| Item Weight | 1.94 pounds |
| Item model number | 041072086004 |
| Manufacturer | PPG |
| Package Dimensions | 6.65 x 5.94 x 1.46 inches |
Listed on Amazon as: Homax Anti-Skid Paint Additive, 16 oz, Tread-Tex (Pack of 2)
View on AmazonWhy it ranks #9: It is formulated for floor paints and interior or exterior surfaces, rather than specifically for gelcoat or marine coatings.
Bondex Skid-Tex is described as a non-skid compound for all types of floor paints, with application by roller or brush as straightforward as applying paint. That familiar workflow makes it relevant to buyers coating interior or exterior surfaces who want slip resistance without a separate specialized application method.
The supplied description emphasizes easy mixing and application in all types of floor paints, then specifies roller or brush use. Those details connect the additive to familiar floor-paint tools and can simplify planning for walkways, patios, or other listed interior and exterior surfaces. Bondex describes the resulting coating as durable and non-skid. The two-pound box provides a stated quantity, while the listing does not specifically name gelcoat, so boat owners should verify coating compatibility before use.
- Formulated for mixing with all types of floor paints, per listing.
- Application is stated for a paint roller or brush.
- Described as suitable for interior and exterior surfaces.
- Two-pound quantity is specified.
- Gelcoat compatibility is not stated in the supplied product details.
Skip it if you require explicitly listed gelcoat mixing; Fasco Epoxies Fas-Grip Coarse names gelcoat among compatible coatings.
Bondex Skid-Tex suits floor-paint projects where roller or brush application is preferred on interior or exterior surfaces. Its description focuses on floor paints rather than gelcoat, so boat owners should confirm that the intended coating is supported.
Full product details
| Brand | Bondex |
|---|---|
| Item Weight | 2.5 pounds |
| Manufacturer | Bondex |
Listed on Amazon as: Bondex 22532 2-Pound Box Skid-Tex Non Skid Paint Additive
View on AmazonWhy it ranks #10: Its directions specify 3.2 ounces per gallon for concrete sealers, paint, or stain, making it the least direct gelcoat match.
Finely ground polymers that disappear in solution distinguish Bon Tool Gator Grip, helping add slip resistance without affecting finish color or yellowing. The listing focuses on concrete applications and names sealer, paint, or stain as mixing options, making it a potential fit for compatible walkways, poolsides, steps, and patios.
Bon specifies 3.2 ounces per gallon and says to combine the additive with sealer, paint, or stain. That stated ratio gives buyers a concrete starting point for preparing a coating, while the finely ground polymers disappear in solution. The listing names concrete walkways, poolsides, steps, and patios, and says the additive will not affect finish color or yellow. It does not specifically identify gelcoat, so the listed concrete-oriented guidance should not be treated as confirmation for marine coatings.
- Finely ground polymers disappear in solution.
- Mixes with sealer, paint, or stain.
- Use rate is stated as 3.2 ounces per gallon.
- Listing says it will not affect finish color or yellow.
- The stated application guidance is concrete-focused and does not specify gelcoat compatibility.
Skip it if you need an additive explicitly specified for gelcoat; Fasco Epoxies Fas-Grip Fine lists gelcoat compatibility.
Gator Grip fits buyers treating concrete walkways, poolsides, steps, or patios with sealer, paint, or stain. Its stated ratio and finish-color claims are useful for those applications, but the listing does not establish use in gelcoat.
Full product details
| Brand | Bon |
|---|---|
| Color | Multi |
| Included Components | GATOR GRIP – 3.2 OZ |
| Item Dimensions | 2.5 x 2.5 x 6 inches |
| Item Form | Liquid |
| Dimensions | 2.5 x 2.5 x 6 inches |
| Manufacturer | Bon Tool |
| Material | Blend |
| Model | 32-540 |
Listed on Amazon as: Bon Tool Gator Grip Slip Resistant Additive 3.2oz
View on AmazonWhy coating compatibility is the key gelcoat trap
The main compatibility trap is treating an additive made for paint as automatically suitable for gelcoat. The two Fasco Epoxies Fas-Grip listings explicitly say they mix into gelcoat, epoxy, polyurethane, and marine paints, making them the clearest matches in this selection. Awlgrip Griptex Quart is described for use with an Awlgrip topcoat, while Rust-Oleum Marine Anti-Slip lists fiberglass as a compatible surface but says to mix it with latex or oil-based paint.
Those details do not establish that either product can be mixed into every gelcoat system. Likewise, Bondex Skid-Tex and Zinsser Skid-Tex are described for floor paints.
Before buying, identify whether your job calls for additive mixed into gelcoat, or an additive mixed into a coating applied over a fiberglass surface. Follow the relevant manufacturer’s instructions; the product names alone do not settle compatibility.
Fine versus coarse grit on a wet deck
Fine and coarse grit trade a gentler underfoot texture for more pronounced traction. Fasco Epoxies Fine Fas-Grip is described as creating a subtle, uniform texture without sharp grit, while Fasco Epoxies Coarse Fas-Grip is positioned for maximum traction on wet, slippery, or high-traffic areas. That distinction matters on a boat: a swim platform or heavily used deck may call for more aggressive grip, while a surface where bare feet are common may make a subtler texture preferable.
The supplied information does not provide a quantified texture size or a standardized slip-resistance rating, so the words fine and coarse are comparative descriptions, not measurable performance guarantees. Awlgrip Griptex Quart is described as polymer bead aggregate, and the gallon Griptex listing specifies coarse grit.
Consider where people step, how wet the area gets, and the feel you want, then verify application guidance before committing to a finish.
How to Choose a Gelcoat Non-Skid Additive
Gelcoat and coating compatibility
Look first for an explicit statement that the additive mixes into gelcoat, not just a mention of marine use. Both Fasco Epoxies Fas-Grip products list compatibility with gelcoat, epoxy, polyurethane, and marine paints. Awlgrip Griptex Quart is specified for mixing with an Awlgrip topcoat; Rust-Oleum Marine Anti-Slip lists fiberglass surfaces but specifies latex or oil-based paint.
Products such as Zinsser Skid-Tex and Bondex Skid-Tex are described for floor paints. Choose the Fasco options when you need the clearest stated gelcoat fit.
If considering a paint-specific or topcoat-specific product, confirm that your exact coating system is permitted before use.
Texture and traction level
Choose the grit based on the balance you need between underfoot feel and grip. Fasco Epoxies Fine Fas-Grip is described as fine-grade and subtle, while Fasco Epoxies Coarse Fas-Grip uses large particles for aggressive traction on wet or high-traffic surfaces. Awlgrip Griptex Coarse Gallon also identifies coarse grit, but the supplied details do not quantify its texture.
A frequently wet swim platform, ramp, or work area favors the more aggressive end of the range. A deck where a less pronounced feel matters favors the fine option.
None of these listings provides a common numerical grit size or slip-resistance score, so use the product directions and your intended surface to guide selection.
Pack format and listed directions
Match the package and any stated mixing information to the amount of coating you plan to prepare. Fasco Epoxies Coarse Fas-Grip is listed in a 32-fluid-ounce size and described as a quart for five gallons; the fine Fas-Grip title also describes a quart for five gallons, although its specifications separately list 10 fluid ounces. That discrepancy makes checking the actual package and current instructions especially important.
Bon Gator Grip gives a specific direction of 3.2 ounces per gallon, but its stated uses are sealer, paint, or stain on concrete. Awlgrip Griptex Coarse Gallon is listed in a gallon format without supplied mixing directions.
Larger format may suit a larger project only when compatibility and instructions fit.
Which non-skid additive fits your gelcoat project?
For gelcoat that needs pronounced grip on a wet boat deck or swim platform, choose Fasco Epoxies Coarse Fas-Grip: it explicitly lists gelcoat compatibility and targets aggressive traction. If a subtler, more uniform feel matters, choose Fasco Epoxies Fine Fas-Grip, while checking its listed package details because the title and volume specification differ. For a deck system using Awlgrip topcoat, Awlgrip Griptex Quart is the more specifically described match; Awlgrip Griptex Coarse Gallon is an option when coarse grit is the priority, though its supplied compatibility details are limited.
Rust-Oleum Marine Anti-Slip may suit paint applied to fiberglass, but its directions specify latex or oil-based paint. Avoid assuming floor-paint products work in gelcoat: verify system compatibility before mixing.
Related Buying Guides
Frequently Asked Questions
How do I mix non-skid additive into gelcoat without creating an uneven texture?
Follow the additive and gelcoat manufacturers’ mixing directions, and stir thoroughly so particles are distributed evenly before application. Avoid guessing at the amount or mixing method; products and gelcoat systems may differ. Check that the additive is compatible with your specific gelcoat, and apply consistently to help avoid patches with noticeably different texture.
Should I choose fine or coarse grit for a boat deck?
Choose coarse grit when pronounced traction on a wet, high-traffic deck or swim platform is the priority; choose fine grit for a subtler, more uniform feel. The best choice depends on the surface and how much texture you want. Confirm the selected product’s directions and suitability for your gelcoat system.
Can I apply non-skid additive directly to cured gelcoat?
Do not assume the additive can be applied directly to cured gelcoat; it is generally mixed into a compatible coating rather than used alone. Check the product directions and the requirements of your gelcoat system. If the gelcoat is already cured, confirm what compatible coating and surface preparation are required before proceeding.
How can I tell whether an additive is suitable for my gelcoat system?
Check the product’s listed compatibility and instructions against the specific gelcoat system you plan to use. Fasco Epoxies Coarse Fas-Grip explicitly lists gelcoat compatibility, while some other products have limited compatibility details. When information is unclear, confirm suitability with the manufacturer rather than assuming that a paint additive will work.
What should I check before applying a non-skid coating?
Check the additive and coating directions, confirm their compatibility, and make sure the surface preparation matches the coating system. Also consider whether the grit will provide the texture you want for the location. Do not transfer instructions from another product: for example, Rust-Oleum Marine Anti-Slip specifies latex or oil-based paint.
Final Words
For a wet gelcoat deck or swim platform that needs pronounced grip, Fasco Epoxies Coarse Fas-Grip is the clearest match because it lists gelcoat compatibility and aggressive traction. Choose Fine Fas-Grip for a subtler texture, while checking its package details. Awlgrip Griptex Quart is more specifically described for an Awlgrip topcoat.
Before mixing any additive, verify its directions and suitability for your exact coating system.






