Best Motorcycle Phone Mounts for Different Bike Setups

#1 · Best Overall

1. Lamicall Dual Dampener Mount

• Enclosure Material: Metal, Plastic, Silicone
• Compatible with Vehicle Type: Bicycle, Motorcycle

Best for: Camera-conscious motorcycle riders.

Why it ranks #1: Its patented dampener uses four springs to absorb engine vibration, cushioned corners protect the phone, and the stated fit covers 4.7–6.7-inch phones.

Four damping springs on a metal board give the Lamicall mount its defining anti-shake feature, intended to absorb engine vibration and help protect a phone camera. Cushioned rubber pads at the clamp corners add contact protection, pairing vibration management with a softer grip for everyday motorcycle use.

The spring-based dampener addresses vibration from a running engine, while the rubber-cushioned clamp corners help protect the phone from impact against the holder. Together, these features make the mount relevant to riders who keep a phone secured for navigation while riding. Its stated compatibility covers 4.7–6.7-inch phones and both bicycle and motorcycle use, so larger phones fall outside the listed screen range.

Skip it if you use a phone larger than 6.7 inches; the BRCOVAN M26-C1 lists support for screens up to 7.2 inches.

Pick this Lamicall for a motorcycle or bicycle setup where engine-vibration damping and cushioned phone contact matter. Its listed 4.7–6.7-inch range is the key fit boundary for larger-screen phones.

Listed on Amazon as: Lamicall Motorcycle Phone Mount Holder with Dual Vibration Dampener

#2 · Best Vibration Control

2. JOYROOM Dual Dampener Mount

• Weight: 0.4 kg
• Enclosure Material: Alloy Steel, Aluminum, Carbon Fiber
• Compatible with Vehicle Type: ATV, Bicycle, Dirt Bike, Motorcycle, Scooter

Best for: Vibration-conscious road riders.

Why it ranks #2: The listed pneumatic dual-dampener system claims to cushion up to 95% of vibration, and the mount fits phones from 4.7 to 7 inches.

JOYROOM’s pneumatic shock-absorbing dual dampener is the defining feature, with the listing claiming it cushions up to 95% of vibration. That system is aimed at riders who want to keep a phone steadier on bumpy roads, while the safety button provides a separate locking step for the mount.

The dual dampener combines pneumatic shock absorption with anti-shake construction, addressing vibration during motorcycle or bicycle rides. A safety button behind the holder must be set to locked while riding, adding a clear check to the mounting routine. The holder fits 4.7–7-inch phones without a case, so riders using a protective case should account for the stated fit restriction before choosing it.

Skip it if you need to mount a phone inside its case; the Tackform 20MAXX cradle is listed for phones with or without cases.

This JOYROOM suits motorcycle and bicycle riders seeking vibration damping and a separate safety-button check. It is a better fit for bare phones within the 4.7–7-inch range than for riders who keep a case on.

Listed on Amazon as: JOYROOM Motorcycle Phone Mount Holder – [Dual Vibration Dampener] 150mph Anti-Shock Phone Holder for Motorcycle [Upgrade Handlebar Clamp] – Bicycle Bike Phone Holder Mount for 4.7-7" Cell Phones

#3 · Best Security Hardware

3. BRCOVAN Aluminum Anti-Theft Mount

• Weight: 500 g
• Enclosure Material: Aluminum alloy main body, stainless steel…
• Compatible with Vehicle Type: ATV, Bicycle

Best for: Rugged, security-minded riders.

Why it ranks #3: Its 6061-T6 aluminum body, vibration dampener and wrench-tightened safety knob suit riders prioritizing a sturdy, harder-to-remove handlebar or mirror mount.

A 6061-T6 aluminum-alloy body gives this BRCOVAN mount its central distinction, paired with a safety-knob double-socket arm and vibration dampener. The one-push automatic grip lets a rider place or release a phone with one hand, while the wrench-secured knob helps deter easy removal.

The double-socket arm connects to an aluminum handlebar base and supports rear-view-mirror mounting as well, giving riders two placement routes. Its special safety knob can be tightened with the included wrench, while the one-push cradle grips or releases the phone through a push at the top. Listed phone dimensions allow screens from 5.4 to 7.2 inches and thickness up to 20 mm.

Skip it if you use a phone thicker than 20 mm; the Tackform 20MAXX listing describes compatibility with phones in cases without that thickness limit.

This BRCOVAN suits riders seeking a metal-bodied mount, one-hand phone handling, and a safety-knob arm. Check the 20 mm maximum phone thickness and choose between the listed handlebar or mirror mounting options.

Listed on Amazon as: BRCOVAN Anti-Theft Aluminum Alloy Motorcycle Phone Mount Holder

#4 · Best Bar Fit

4. Tackform 20MAXX Mount

• Enclosure Material: CNC Machined Billet Aluminum, Glass Infused…
• Compatible with Vehicle Type: ATV, Extreme Off-Road, Motorcycle, UTV

Best for: Metal-cradle adventure riders.

Why it ranks #4: Included bushings cover 7/8-, 1-, 1-1/8- and 1-1/4-inch handlebars, while the billet-aluminum spring cradle is designed for motorcycle and off-road use.

A spring-loaded 20MAXX cradle made from 6061-T6 billet aluminum defines this Tackform mount, pairing a metal phone grip with a short-reach arm. The included clamp accommodates several common round handlebar sizes, supporting a compact motorcycle or off-road installation.

Included bushings let the bar clamp fit 7/8-, 1-, 1-1/8-, and 1-1/4-inch handlebars, so riders can match the base to one of those listed diameters. The cradle’s stainless-steel compression springs and support pins secure the phone, while replaceable rubber grips add contact at the holder. Its 20mm ball-and-socket system works with Tackform’s 20 Series platform for positioning flexibility.

Skip it if you have handlebars outside 7/8–1-1/4 inches; the RAM Tough-Claw clamps rails measuring 0.625–1.14 inches.

This Tackform suits riders who want an all-metal spring cradle and a short-reach position for motorcycle or off-road use. Its included clamp fits the listed 7/8- to 1-1/4-inch bar sizes.

Listed on Amazon as: Tackform Black Motorcycle ALL METAL Phone Mount – 20MAXX Spring Cradle | BC3 Universal Clamp Fits 7/8" to 1-1/4" Handlebars | Aluminum | Compatible with iPhones, Galaxy Devices, More | Short Reach Arm

#5 · Best Charging Setup

5. BRCOVAN Qi Charger Mount

• Enclosure Material: PA66+GF30% main body, aluminum alloy mounting…
• Compatible with Vehicle Type: Motorcycle

Best for: Charging-focused touring riders.

Why it ranks #5: It combines Qi wireless charging with a 36W-max USB-C port, can charge two devices simultaneously and lists an IP66 waterproof level.

Simultaneous Qi wireless and USB-C charging is the BRCOVAN mount’s defining convenience, allowing two devices to draw power from the setup at once. Its wireless pad supports several listed Qi power modes, while the USB-C port supplies up to 36W.

The wireless charger supports Qi 15W, 10W, 7.5W, and 5W modes, while the USB-C port is rated at up to 36W; together they allow a phone and another device to charge at the same time. The package includes a 59-inch battery cable and an independent power switch. The system requires a 12–24V DC input, so riders need a compatible electrical supply for installation.

Skip it if you do not have a compatible 12–24V DC power supply; the BRCOVAN M23C mount provides phone holding without the listed charging system.

Choose this BRCOVAN for motorcycle rides where charging a phone and another device together is useful. Its wired 12–24V DC input makes electrical compatibility an essential installation consideration.

Listed on Amazon as: BRCOVAN Motorcycle Phone Mount with Qi Wireless & USB-C Charger

#6

6. BRCOVAN Fork Stem Mount

• Weight: 0.45 kg
• Enclosure Material: Aluminum Alloy Fork Stem Mounting Base…
• Compatible with Vehicle Type: Motorcycle

Best for: Fork-stem mounting riders.

Why it ranks #6: Its fork-stem base offers an alternative to handlebar clamps, and its built-in springs and eight-claw cradle are specified for phones from 5.4 to 6.9 inches.

An aluminum-alloy fork-stem base sets this BRCOVAN apart from handlebar-clamp mounts, giving riders a dedicated steering-stem installation option. Its vibration dampener and industrial springs pair with an eight-claw phone cradle to help keep a phone secured over bumpy roads.

The fork-stem base provides the mounting point, while a double-socket arm and high-strength composite cradle hold the phone. Industrial springs and the eight-claw wrapping design address vibration and phone retention during bumpy riding. The stated fit covers screens from 5.4 to 6.9 inches, with a maximum thickness of 16 mm, giving buyers concrete dimensions to check before setup.

Skip it if you use a phone thicker than 16 mm; the BRCOVAN M26-C1 lists support for cases up to 20 mm thick.

This BRCOVAN suits riders seeking a fork-stem phone mount with vibration management and an enclosing cradle. Check the 5.4–6.9-inch screen range and 16 mm thickness limit before choosing it.

Listed on Amazon as: BRCOVAN Motorcycle Fork Stem Phone Mount with Vibration Dampener

#7

7. BRCOVAN Composite Anti-Theft Mount

• Weight: 400 g
• Enclosure Material: Main body made of PA66+GF30% high-strength…
• Compatible with Vehicle Type: Motorcycle

Best for: Security-conscious off-road riders.

Why it ranks #7: The PA66+GF30% body, stainless-steel telescopic rods and wrench-tightened safety screw offer a security-focused design for phones from 5.4 to 7.2 inches.

A wrench-tightened safety screw on the double-socket arm and handlebar base is the BRCOVAN mount’s defining feature, helping deter casual removal. Its vibration dampener and adjustable phone cradle make it a fit for riders who want a secured phone position on rougher motorcycle routes.

The aluminum-alloy handlebar or rear-view-mirror base gives riders two mounting options, while the double-socket arm lets them set the phone angle. Tightening the safety screw with the included wrench adds a security step; after locking it, angle changes require loosening the knob rather than the screw. The cradle fits phones with 5.4–7.2-inch screens and cases up to 20 mm thick, so check those dimensions before installation.

Skip it if you want to alter the holder angle without loosening a knob after locking the arm; the JOYROOM JR-288 offers one-click phone locking instead.

Choose this BRCOVAN for motorcycle riders who prioritize a wrench-secured mount and want handlebar or mirror-base installation. Its phone-size range is broad, but angle adjustments after locking the arm require loosening the knob.

Listed on Amazon as: BRCOVAN Anti-Theft Motorcycle Phone Mount Holder with Vibration Dampener

#8

8. JOYROOM Auto-Lock Mount

• Weight: 9.6 oz
• Enclosure Material: Carbon Fiber, Silicone
• Compatible with Vehicle Type: ATV, Automobile, Bicycle, Motorcycle

Best for: One-handed phone access.

Why it ranks #8: Its one-click, four-arm auto-lock fits 4.7–7-inch phones, and the listing describes cushioned contact points and a high-speed lock switch.

A single click activates JOYROOM’s four-arm auto-lock, letting riders secure a phone with one hand instead of closing each clamp arm individually. Pressing both sides releases it, while cushioned contact points protect the phone and handlebar during use.

The auto-lock button and four-arm mechanism simplify placing and removing a phone, a practical advantage when a quick mount-and-release routine matters. JOYROOM also lists a high-speed lock switch and cushioning on both the clamp and mount, combining a locking step with padded contact at the phone and handlebar. Compatibility covers 4.7–7-inch phones; confirm that screen size is within the stated range before setting up.

Skip it if you use a phone larger than 7 inches; the BRCOVAN M26-C1 supports screens up to 7.2 inches.

This JOYROOM fits riders who frequently take a phone on and off the mount and value one-handed locking. Its 4.7–7-inch phone range is the main fit boundary to consider before installation.

Listed on Amazon as: JOYROOM Motorcycle Phone Mount, [1s Auto Lock][100mph Military Anti-Shake] Bike Phone Holder for Bicycle, [10s Quick Install] Handlebar Phone Mount, Compatible with iPhone, Samsung, All Cell Phone

#9

9. Lamicall One-Hand Mount

• Weight: 7 oz
• Enclosure Material: Aluminum, Plastic, Silicone, Stainless Steel
• Compatible with Vehicle Type: Motorcycle, Bicycle, Scooter

Best for: Simple lock-and-go riders.

Why it ranks #9: This compact 7-ounce option fits 4.7–6.8-inch phones and uses silicone pads plus a red rear switch to lock the phone clip while riding.

A red rear switch locks the Lamicall holder’s phone clip, adding a deliberate security step after its one-hand phone placement. Corner-gripping arms and silicone pads help keep the phone in position and cushion it against scratches and vibration on motorcycle or bicycle rides.

The shaped clamp grips each phone corner, while the red switch must be locked to help prevent the phone from falling during a ride. Silicone pads add a softer interface against scratches and vibration. The mount is listed for 4.7–6.8-inch phones, giving riders a clear size boundary to check before choosing it for a handlebar setup.

Skip it if you want a phone holder that locks automatically with a click; the JOYROOM JR-288 uses a one-click auto-lock mechanism.

Choose this Lamicall if you want a straightforward handlebar holder with padded contact and a separate lock switch. It suits phones from 4.7 to 6.8 inches, and riders must engage the rear switch.

Listed on Amazon as: Lamicall Bike Phone Holder Motorcycle Mount – One-Hand Operation, Lockable

#10

10. RAM MOUNTS X-Grip

• Weight: 8.16 oz
• Enclosure Material: High Strength Composite, Marine Grade Aluminum
• Compatible with Vehicle Type: Motorcycle/ATV/UTV/etc.

Best for: Tool-free rail mounting.

Why it ranks #10: The spring-loaded X-Grip and Tough-Claw clamp fit rails from 0.625 to 1.14 inches, but the listing emphasizes versatile rails rather than motorcycle-specific vibration control.

The RAM Tough-Claw clamps without tools to round, square, and irregular rails, giving riders a flexible base for bars that do not share a standard shape. Its spring-loaded X-Grip holds a large phone with rubber-capped arms while leaving the screen unobstructed.

The small Tough-Claw base fits rails and bars measuring 0.625–1.14 inches in outer diameter, and rubber pads help grip while protecting the mounting surface. The spring-loaded X-Grip keeps the phone accessible rather than covering its screen, while an optional device tether adds another retention measure for rugged use. Its listed phone compatibility includes many Apple and Samsung models, so check the model list for your device.

Skip it if you need a clamp for handlebars wider than 1.14 inches; the Tackform BC3 fits listed bar sizes up to 1-1/4 inches.

Pick the RAM X-Grip for riders who want tool-free clamping on varied rail shapes and an accessible phone screen. Its small Tough-Claw base is limited to bars measuring 0.625–1.14 inches.

Listed on Amazon as: RAM MOUNTS X-Grip Large Phone Mount with Tough-Claw Clamp Base