Best Motorcycle Grips For Numb Hands: Compare 10 Options

#1 · Best Overall

1. Oury Road/Street Motorcycle Grip

• Dimensions: 5"L x 1.26"W
• Material: Rubber
• Compatible with Vehicle Type: off-road-motorcycles…
• Size: Medium to Large

Best for: Large-pad street vibration relief.

Why it ranks #1: Its anti-vibration large-pad design is specifically described as reducing numbness and slipping; the pair has 7/8-inch and 1-inch grip IDs.

Oury’s large anti-vibration pad design is specifically claimed to eliminate numbness and slipping for any hand size, making this road and street pair directly relevant to riders seeking that benefit. The grips are listed for 7/8-inch handlebars, with separate left and twist-throttle inside diameters.

The large pad design links the stated vibration reduction with the aim of preventing numbness and slipping, while the listed 1.26-inch outer diameter gives a sizing reference for the hand-contact area. The pair has a 7/8-inch inside diameter on the left and a 1-inch throttle-side diameter, and the small flange is described as suitable for most street motorcycles with twist throttle. Its 5-inch length further helps compare the grips with an existing setup.

Skip it if you use a throttle setup other than the listed twist-throttle configuration; the right grip has a 1-inch inside diameter.

Street and road riders seeking a large-pad grip with an explicit numbness-reduction claim are the clearest match. Check the 7/8-inch left and 1-inch twist-throttle sizing before selecting this pair.

Listed on Amazon as: Oury Grip OSCROG10 Road/Street Motorcycle Grip

#2 · Best Foam Overgrip

2. Grip Puppy Original Comfort Grips

• Dimensions: 6"L x 1.45"W
• Material: Technical Foam Product, Stable, Closed Cell
• Compatible with Vehicle Type: ATV, Scooter
• Size: Original

Best for: Over-grip foam comfort.

Why it ranks #2: Closed-cell technical foam fits over standard round grips and is described as reducing vibration and hand fatigue; hand-finished texture adds grip.

A stable, closed-cell technical-foam construction distinguishes the Original Grip Puppy Comfort Grips, which fit over standard round grips rather than replacing them. The soft foam is intended to reduce vibration and hand fatigue, making this pair a practical candidate for riders seeking added cushioning without removing their existing grips.

These over-grips install over standard round cycle grips, preserving the underlying grips while adding a foam contact surface. The closed-cell technical foam is described as stable, soft, and vibration reducing, linking its material to the intended comfort benefit. Fitting calls for dilute soapy water inside the grip before working it on. Hand-finished texture and rounded ends add a more comfortable edge and are stated to wear better over time.

Skip it if you need a direct replacement grip without an underlying standard round grip; Grip Puppy fits over existing grips.

Choose these for a motorcycle, scooter, or ATV with standard round grips when adding a foam layer is the goal. Their over-grip installation and soapy-water fitting process are key considerations.

Listed on Amazon as: The Original Grip Puppy Comfort Grips

#3

3. CHENGRUN Foam Grip Covers

• Dimensions: 4.52"L x 1.3"W
• Material: foam
• Compatible with Vehicle Type: Universal Motorcycle Grip Covers
• Size: 1 inch x 4.52"

See also  Best Fender Flares For Can Am Defender: Compare 10 Options

Best for: Foam comfort for long rides.

Why it ranks #3: High-density foam is described as absorbing handlebar vibration and reducing fatigue; the pair fits most 25 mm handlebars and measures 115 mm long.

High-density foam is the defining feature of CHENGRUN TRADE’s grip covers, with the stated purpose of absorbing handlebar vibration and reducing hand fatigue on longer rides. Their textured, anti-slip surface adds a more secure hold with wet hands or gloves, while the 25 mm sizing targets standard handlebars.

The foam construction is intended to soften vibration reaching the hands, a practical benefit for riders spending longer stretches on the bike. A textured, frosted surface supports a steadier hold when hands or gloves are wet. The covers measure 115 mm long and have a 25 mm inside diameter, so the listed fit is for standard 25 mm bars. Installation calls for a water-and-dishwashing-liquid mix, a useful step to prepare before fitting the pair.

Skip it if you need a longer-than-115 mm grip; these covers have a listed length of 115 mm.

A rider seeking foam cushioning and a textured hold for longer trips may value this pair. The fit is specifically listed for 25 mm bars, and the 115 mm length is worth weighing before choosing covers.

Listed on Amazon as: 2 Pcs Motorcycle Foam Hand Grips Covers, 25 mm/0.98 Inch Universal Anti Slip Motorcycle Grip Covers Shock Absorption Handlebar Grip for BMW Yamaha Honda Suzuki Kawasaki

#4 · Best Impact Cushioning

4. Pro Taper Pillow Top Grips

• Dimensions: 6.4"L x 2.6"W
• Material: Plastic, Rubber
• Compatible with Vehicle Type: Motorcycle
• Size: 6.4 in x 2.6"

Best for: Off-road cushioned grip.

Why it ranks #4: Its Vibrasonix pillow top is described as eliminating vibration and cushioning impact, while the tacky surface and denser anti-rip tip suit off-road use.

Pro Taper’s Vibrasonix pillow-top construction is intended to eliminate vibration and cushion impact, a combination aimed at riders dealing with rough off-road inputs. Its tacky, gel-like surface compound supports a secure-feeling hold, while the listing also specifies a denser anti-rip tip and a design that sheds mud.

The pillow-top Vibrasonix feature connects cushioning with vibration reduction, useful when off-road riding brings repeated impact to the bars. A tacky gel-like surface compound is described as suited to off-road riders, while the denser anti-rip tip is intended to increase grip life. The outer surface is designed to self-clean and shed mud, helping keep the grip surface clearer in muddy conditions. The listing identifies these as motorcycle grips but does not state a handlebar diameter.

Skip it if you need a stated bar diameter before selecting grips; this listing does not give one.

Off-road riders seeking impact cushioning, a tacky surface, and mud-shedding details may find this option relevant. Check the listed fit information carefully, since no handlebar diameter is supplied.

Listed on Amazon as: PRO TAPER Pillow Top Motorcycle Grips – BLACK – CRF YFZ RMZ KXF SXF XC -024858

#5

5. surpassme Thruster Grip

• Material: Silicone
• Compatible with Vehicle Type: Motorcycle
• Size: Open Bar End-7/8"&1"(22mm&24mm)

Best for: Silicone comfort for mixed sizes.

Why it ranks #5: Soft silicone is described as shock-resistant and comfortable, with 7/8-inch left and 1-inch right sizing; the listing notes that instructions are not included.

Soft, shock-resistant silicone is the central comfort feature of these surpassme grips, which are described as helping relieve fatigue on long rides. Their listed sizing is 7/8 inch for the left handlebar and 1 inch for the right, a useful detail for riders checking a mixed-diameter setup.

The silicone material is described as soft and shock resistant, connecting the contact surface to the stated comfort aim. The anti-slip claim supports a steadier hand position, while the product is described as easy to install. Its size listing specifies a 7/8-inch left grip and a 1-inch right grip, so checking those sides against the bars is important. Instructions are not included, meaning installation relies on the stated ease rather than supplied guidance.

Skip it if you rely on included installation instructions; this listing says instructions are not included.

Riders seeking a soft silicone surface and the listed split sizing may consider this pair for longer rides. Its instruction-free package and left-right diameter distinction are practical points to account for.

Listed on Amazon as: Motorcycle Grips Non Slip Rubber Bar End Thruster Grip 7/8" 22mm 24mm Motorcycle Comfort Hand Handlebar Grip Thruster Grip

#6 · Best Vintage Pattern

6. Coxotom Vintage Rubber Grips

• Dimensions: 4.92"L x 1.25"W
• Material: Rubber
• Compatible with Vehicle Type: ATV, Bike, Dirt Bike, Harley, Motorcycle…
• Size: 7/8"22mm left grip & 1" 24mm right grip

Best for: Vintage diamond rubber pair.

Why it ranks #6: Soft, non-slip rubber is described as helping relieve fatigue on long rides; the diamond pattern pair specifies 22 mm left and 24 mm right grips.

A vintage diamond pattern gives Coxotom’s universal motorcycle grips a distinct surface, paired with soft, non-slip rubber intended to ease fatigue on long drives. The pair uses different stated inside sizes—7/8 inch on the left and 1 inch on the right—so the asymmetric sizing is central to choosing them.

The soft rubber is described as comfortable and intended to relieve hand fatigue, while the non-slip material supports a steadier hold during rides. The diamond pattern adds the listed vintage styling. This pair specifies a 7/8-inch left grip and a 1-inch right grip, making the two-sided sizing important for installation. If the handlebar is tight during fitting, the supplied guidance says detergent or lubricant can help the grips slide on.

Skip it if you need matching inside diameters on both sides; this pair specifies 7/8 inch left and 1 inch right.

Riders seeking soft rubber, a diamond pattern, and the listed split sizing may find this pair suitable. Confirm that the 7/8-inch left and 1-inch right dimensions match the intended setup.

Listed on Amazon as: Universal Motorcycle Handles Grips – Non Slip Rubber Motorcycle Grips for Harley Honda Yamaha Suzuki Kawasaki Dirt Bike

#7

7. ODI Motocross Half Waffle Grips

• Dimensions: 4.72"L x 1.2"W
• Material: Rubber
• Compatible with Vehicle Type: Dirt Bike
• Size: 120mm Length

Best for: Motocross medium-compound grip.

Why it ranks #7: ODI’s medium-compound rubber is described as providing comfort without sacrificing durability; the 120 mm pair is listed for dirt bikes.

ODI’s proprietary medium-compound rubber is the key feature of these half-waffle motocross grips, with the maker describing it as balancing comfort and durability. At 120 mm long and listed for dirt bikes, they give off-road riders a defined grip style and size to assess for their setup.

The medium compound is presented as providing comfort without sacrificing durability, linking the material choice to both hand feel and service life. A half-waffle pattern identifies the grip style, while the 120 mm length offers a concrete measurement for comparing with current grips. The listing specifies dirt-bike compatibility and that the grips are sold in pairs. It does not describe a dedicated vibration-damping feature, so the stated comfort claim is limited to the compound description.

Skip it if you want a specifically stated vibration-absorbing grip; ODI lists comfort from its compound but no dedicated damping feature.

Dirt-bike riders seeking a medium-compound half-waffle pair can use the 120 mm length as a fit reference. Those prioritizing explicit vibration reduction should weigh that no dedicated damping feature is listed.

Listed on Amazon as: Odi Motocross Single Ply Grips Half Waffle Black Univ

#8

8. NIBBI CNC Aluminum Grips

• Material: Silicone
• Compatible with Vehicle Type: Scooter
• Size: 22mm

Best for: CNC aluminum and soft rubber.

Why it ranks #8: Soft, non-slip silicone sections are described as improving comfort, and the 22 mm size specifies 7/8-inch left and 1-inch twist-throttle right fit.

A CNC aluminum-and-soft-rubber construction sets NIBBI’s hand grips apart from all-rubber options, combining a metal element with a cushioned contact material. The listing specifies a 7/8-inch bar on the left and a 1-inch twist-throttle side, making its asymmetrical sizing central to fit selection.

The soft rubber is described as non-slip and intended to make riding more comfortable, while the CNC aluminum component supplies the product’s distinct construction. The stated fit is for 7/8-inch motorcycle bars on the left and a 1-inch right side for twist gas throttle. For rough handle surfaces, the listing recommends moistening with lubricant or water during installation. It also identifies ATV, GY6, and scooter use in the title and compatibility details.

Skip it if you need equal diameters on both sides; NIBBI specifies 7/8 inch left and 1 inch right for twist throttle.

A rider with the listed 7/8-inch left bar and 1-inch twist-throttle side may value the mixed construction and soft rubber. Check those dimensions and prepare lubricant or water if the handle surface is rough.

Listed on Amazon as: NIBBI Motorcycle Hand Grips, Racing CNC Aluminum & Soft Rubber Handlebar,7/8" Handle Grips for ATV GY6 Scooter

#9

9. Benlari 1-Inch Cable Throttle Grips

• Dimensions: 5.5"L x 1.7"W
• Material: Aluminum
• Compatible with Vehicle Type: Fit for Harley Davidson Touring Dyna Softail…
• Size: 1inch Cable Throttle Handlebar Grips

Best for: Cable-throttle Harley fit.

Why it ranks #9: The listing supplies detailed Harley-Davidson fitment, but does not state a vibration-reduction feature and excludes electric throttles and 1-1/4-inch throttle bars.

A 1-inch cable-throttle configuration makes Benlari’s grips a focused choice for listed Harley-Davidson applications rather than a general universal option. The rubber handgrips are described as non-slip, while detailed model-year and exception lists help buyers narrow compatibility before installing a pair.

The stated fit covers selected Touring, Sportster, Softail, and Dyna models, with specific model-year ranges and exclusions. That detail matters because this is a 1-inch grip for cable throttle, not an electric-throttle setup. The non-slip rubber surface is the listed contact feature, while the 5.5-inch length provides a dimension for comparing against the existing grips. The product information expressly rules out 1-1/4-inch throttle-side handlebars and electric-throttle handlebars.

Skip it if you have an electric throttle or a 1-1/4-inch throttle-side bar; these grips are specified for 1-inch cable-throttle setups.

Harley-Davidson owners with a listed model and 1-inch cable throttle are the intended buyers. Check the stated year ranges and exclusions carefully; this pair is not for electric throttle or 1-1/4-inch throttle-side bars.

Listed on Amazon as: Benlari 1inch Handlebar Grips, Cable Throttle Hand Grips, Non-Slip Rubber Motorcycle Handgrips Fit for Harley Davidson Touring Dyna Softail Sportster 883 1200

#10

10. ODI Vans Cult Street Grips

• Dimensions: 4.92"L x 1"W
• Material: Rubber
• Compatible with Vehicle Type: Street Bike
• Size: 125mm x 25.4mm

Best for: Street-bike rubber replacement.

Why it ranks #10: The listing identifies rubber construction and street-bike compatibility but gives no specific cushioning or vibration-reduction feature for numb hands.

A 125 mm rubber grip length gives the ODI Vans Cult Street grips a concrete fit specification for street-bike shoppers. The black pair is listed for a street bike and measures one inch wide, making its stated vehicle category and dimensions the clearest guide to whether it suits your handlebar setup.

These grips use rubber and are identified for street-bike use, so they offer a straightforward replacement option for riders seeking that material and category. Their listed dimensions are 4.92 inches long and one inch wide, while the size is also given as 125 mm by 25.4 mm. The listing supplies no vibration-reduction or cushioning claims, so shoppers prioritizing numb-hand relief should not assume those effects from the product details alone.

Skip it if you specifically want stated vibration cushioning for numb hands; the listing describes rubber and dimensions but no cushioning feature.

Street-bike owners seeking a black rubber grip with stated 125 mm sizing can use these dimensions to assess their replacement needs. Riders choosing primarily for vibration relief should note that no such feature is specified.

Listed on Amazon as: ODI Vans Cult Street Motorcycle Hand Grips – Black / 1"