Best Lift For 4Runner: Compare Kits by Fit and Components

#1 · Best Overall

1. Freedom Offroad 3-Inch Kit

• Weight: 95 lb
• Material: Carbon Steel
• Material Type: Carbon Steel

Best for: Complete Lift With Control Arms.

Why it ranks #1: Lists 3 inches of front and rear lift, loaded front struts, rear lift springs, nitro shocks, and heavy-duty tubular upper control arms for 2003–2024.

Loaded front struts, application-specific rear lift springs, rear shocks, and tubular control arms make this a broad suspension package for 2003–2024 4Runners and FJ Cruisers. It specifies 3 inches of front and rear lift, while adjusted ball-joint angles and OE-style ball joints address control-arm geometry within the supplied setup.

The loaded front struts are described as maintaining factory ride and using bolt-on installation, giving buyers a defined installation approach alongside the lift. At the rear, application-specific springs provide consistent lift, while nitro twin-tube shocks use a 40 mm piston and are intended for lifted vehicles. Heavy-duty tubular control arms include adjusted ball-joint angle, OE-style ball joints, and hardened rubber bushings, making this more extensive than a spacer-only configuration.

Skip it if you want only a lightweight spacer kit; maXpeedingrods’ 9.26-pound 2003–2024 spacer kit is listed at far less weight.

This suits owners seeking a comprehensive 3-inch suspension lift with springs, shocks, struts, and control arms. Its 95-pound listed weight and extensive component set call for planning handling and installation accordingly.

Listed on Amazon as: Freedom Off-Road 3" Lift Struts w Springs,Shocks,UCA's For 03-24 4Runner/FJ

#2 · 33-Inch Tire Fit

2. Rough Country 76630 Kit

• Weight: 29.7 lb
• Material: Alloy Steel, Aluminum, Nylon
• Material Type: Alloy Steel, Aluminum, Nylon

Best for: Fifth-Generation Tire Clearance.

Why it ranks #2: Fits listed 2010–2024 4Runners, levels the front with 3 inches of lift, and states compatibility with tires up to 33 inches.

Clearance for tires up to 33 inches is the key draw of this 3-inch Rough Country kit for 2010–2024 Toyota 4Runners. Its leveling setup raises the front to match the rear, addressing factory rake, while included N3 rear shocks and spacers support a lifted stance without giving up the stated factory-like ride quality.

The 3-inch lift and stated capacity for tires up to 33 inches give owners a defined target for larger-tire plans and added obstacle clearance. Rough Country says the kit levels the front with the rear to eliminate factory rake, a useful stance change for drivers who want a more balanced appearance. Coil spring spacers, strut spacers, hardware, and two Premium N3 shocks are included; the product also claims factory-like ride quality and handling.

Skip it if you want N3 shocks at both ends; Rough Country’s 2003–2009 M1 kit lists lifted front struts and rear shocks.

Pick this for a 2010–2024 4Runner owner seeking a leveled stance, 3 inches of lift, and room for tires up to 33 inches. Its included N3 shocks are rear units.

Listed on Amazon as: Rough Country 3" Lift Kit for Toyota 4Runner (2010-2024) with N3 Rear Shocks – Levels Stance, Fits Up to 33" Tires

#3 · M1 Shock Package

3. Rough Country M1 Kit

• Weight: 74.9 lb
• Material: Alloy Steel, Aluminum, Rubber, Zinc
• Material Type: Alloy Steel, Aluminum, Rubber, Zinc

See also  Best 27 Undermount Sinks: Top 10 Picks

Best for: Older Model M1 Damper Upgrade.

Why it ranks #3: Covers 2003–2009 4Runners and includes M1 lifted struts, M1 monotube rear shocks, and coil spacers in a 3-inch kit.

M1 monotube rear shocks and M1 lifted front struts set this 3-inch Rough Country kit apart for 2003–2009 4Runners and 2007–2014 FJ Cruisers. It also includes coil spacers and hardware, levels the front with the rear, and states that factory ride quality is maintained alongside added ground clearance.

The M1 package includes two lifted front struts and two monotube rear shock absorbers, so buyers get named damping components at both ends rather than rear shocks alone. Rough Country pairs them with coil spacers and hardware for the 3-inch lift, and describes the result as leveling the front with the rear. The stated factory ride quality is relevant for daily driving, while the manufacturer recommends a certified technician and post-install suspension checks.

Skip it if you have a 2010–2024 4Runner; Rough Country’s 3-inch kit for those years lists clearance for tires up to 33 inches.

Choose this for an eligible older 4Runner or FJ Cruiser owner who wants M1 struts and monotube rear shocks in a 3-inch leveling kit. Its model-year range excludes newer 4Runners.

Listed on Amazon as: Rough Country 3" Lift Kit w/M1 Struts & Coils for 03-09 4Runner/07-14 FJ – 76040

#4 · Older 4Runner Pick

4. Rough Country 77131 Kit

• Weight: 39 lb
• Material: Alloy Steel, Aluminum, Rubber, Zinc
• Material Type: Alloy Steel, Aluminum, Rubber, Zinc

Best for: Early 4WD Trail Clearance.

Why it ranks #4: Specifically fits 1996–2002 4WD models and includes coil springs, N3 lifted struts, and rear N3 shocks for a 3-inch lift.

The N3 shocks and struts give this 3-inch kit a complete suspension refresh for 1996–2002 4WD 4Runners, while added ground clearance makes room for tires up to 31×10.50 inches. Its strut extensions avoid preloading the coil spring, and rear shocks use recoil cut-off construction for a more purpose-specific setup.

Included coil springs, N3 lifted struts, rear N3 shocks, and mounting hardware supply the major suspension components together, so buyers can plan around a single kit rather than sourcing those pieces separately. The stated 3-inch lift and clearance for up to 31×10.50 tires suit owners seeking more room on trails. Rough Country describes installation as an at-home bolt-on, but recommends a certified technician and notes that suspension knowledge and post-install checks are required.

Skip it if you have a 2WD 4Runner or a model outside 1996–2002; maXpeedingrods’ 1996–2002 kit lists both 2WD and 4WD fitment.

This suits owners of 1996–2002 4WD 4Runners who want a 3-inch lift, N3 dampers, and room for up to 31×10.50 tires. Its stated application does not cover 2WD models.

Listed on Amazon as: Rough Country 3" Lift Kit w/N3 Struts for 1996-2002 Toyota 4-Runner 4WD – 77131

#5 · N3 Shock Package

5. Rough Country 76031 Kit

• Weight: 74.9 lb
• Material: Alloy Steel, Aluminum, Rubber, Zinc
• Material Type: Alloy Steel, Aluminum, Rubber, Zinc

Best for: Older Model N3 Damper Kit.

Why it ranks #5: Fits 2003–2009 4Runners and includes N3 lifted struts, rear N3 shocks, and coil spring spacers in a 3-inch setup.

N3 lifted front struts and Premium N3 rear shocks give this Rough Country kit a matched damper package for 2003–2009 4Runners and 2007–2014 FJ Cruisers. The 3-inch lift levels the front with the rear, adds ground clearance, and is stated to maintain factory ride quality for a combined stance and suspension upgrade.

The included set names two N3 lifted struts, two Premium N3 shocks, coil spring spacers, and hardware, covering front and rear damping components in one package. That component mix supports the stated 3-inch lift and leveling goal without requiring buyers to piece together those listed parts separately. Rough Country says factory ride quality is maintained and describes installation as an at-home bolt-on, while its safety information recommends certified installation and post-install checks.

Skip it if you own a 2010–2024 4Runner; Rough Country’s 2010–2024 kit lists a 3-inch lift and clearance for up to 33-inch tires.

This suits owners of listed 2003–2009 4Runners or 2007–2014 FJ Cruisers who want a 3-inch leveled lift with N3 dampers front and rear. Newer 4Runners are outside its stated fitment.

Listed on Amazon as: Rough Country 3" Lift Kit w/N3 Struts & Coils for 03-09 4Runner/07-14 FJ – 76031

#6

6. Rough Country 76530RED Kit

• Weight: 0.17 kg
• Material: Aluminum
• Material Type: Aluminum

Best for: Older 4Runner Ride Quality.

Why it ranks #6: Lists fitment for 2003–2009 4Runners and includes N3 rear shocks, coil spring spacers, and strut extensions; it levels front and rear.

Factory ride quality is explicitly maintained in this Rough Country 3-inch kit for 2003–2009 4Runners and 2007–2014 FJ Cruisers. It levels the front with the rear and includes Premium N3 rear shocks, coil spring spacers, strut extensions, and hardware for a coordinated lift rather than a bare spacer purchase.

The listed 3-inch lift adds ground clearance while the front-to-rear leveling approach addresses stance on the specified vehicles. Premium N3 shocks are included for the rear, and Rough Country states that the kit maintains factory ride quality, making those details relevant to buyers balancing lift with everyday use. Coil spring spacers, strut extensions, and hardware are also included. The manufacturer describes installation as an at-home bolt-on, but recommends a certified technician and post-install checks.

Skip it if you need a complete set of front and rear replacement shocks; Rough Country’s 2003–2009 M1 kit lists lifted front struts and rear shocks.

This suits eligible 2003–2009 4Runner and 2007–2014 FJ Cruiser owners wanting a 3-inch leveled lift with stated factory ride quality. Its N3 shocks are rear-only, an important component boundary.

Listed on Amazon as: Rough Country 3" Lift Kit for 03-09 Toyota 4-Runner| 07-14 FJ Cruiser – 76530RED

#7

7. maXpeedingrods 3/2 Kit

• Weight: 9.26 lb

Best for: Newer Model Spacer Leveling.

Why it ranks #7: Covers 2003–2024 4Runners with a 3-inch front and 2-inch rear lift, but excludes Limited models with X-REAS and 2018+ TRD Pro models.

A 3-inch front and 2-inch rear lift spacer arrangement covers 2003–2024 4Runners and 2007–2015 FJ Cruisers, including 2WD and 4WD applications. The front strut spacer uses 6061 aluminum, and the stated exclusions make model verification especially important for Limited vehicles with X-REAS and 2018-or-newer TRD Pro 4Runners.

The front-and-rear height split gives buyers a defined leveling setup rather than a single uniform lift figure: the kit specifies 3 inches at the front and 2 inches at the rear. Its 6061 aluminum front strut spacer is identified as a durable component, while fitment spans 2003–2024 4Runner and 2007–2015 FJ Cruiser 2WD and 4WD models. It explicitly excludes Limited 4Runners with X-REAS hydraulic struts and 2018+ TRD Pro models, so those configurations are outside its stated application.

Skip it if you own a Limited with X-REAS or a 2018+ TRD Pro; TASTONTUP’s listed exclusions are the same, so neither spacer kit addresses that fitment.

This spacer setup suits owners of eligible 2003–2024 4Runners or 2007–2015 FJ Cruisers seeking a 3-inch front, 2-inch rear lift. Avoid it for the stated X-REAS and TRD Pro exclusions.

Listed on Amazon as: maXpeedingrods 3" Front & 2'' Rear Lift Kit for Toyota 4Runner 2003-2024

#8

8. TASTONTUP 3/2 Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Spacer Kit With Differential Drops.

Why it ranks #8: Includes front strut spacers, rear coil spring spacers, and differential and skid-plate drop spacers for listed 2003–2024 fitment, with stated exclusions.

Differential drop spacers distinguish this 3-inch front and 2-inch rear leveling kit, which also includes billet-aluminum front strut spacers, rear coil spacers, and skid plate drop spacers. Listed for 2003–2024 4Runners and 2007–2015 FJ Cruisers in 2WD and 4WD, it excludes specified X-REAS Limited and TRD Pro configurations.

The component list goes beyond front and rear lift spacers: it includes two differential drop spacers and two skid plate drop spacers alongside the front strut and rear coil spacers. That combination gives buyers named supporting pieces to account for when planning installation. TASTONTUP describes the setup as bolt-on, taking two to four hours with no special tools required, and recommends alignment after changing vehicle height. Its listed fitment excludes Limited 4Runners with X-REAS and 2018+ TRD Pro models.

Skip it if you have an excluded Limited with X-REAS or 2018+ TRD Pro; maXpeedingrods’ spacer kit lists those same exclusions.

This is a fit for eligible 2003–2024 4Runner and 2007–2015 FJ Cruiser owners who want named differential and skid plate drop spacers in the kit. Plan for alignment after changing ride height.

Listed on Amazon as: Leveling Lift Kit for 2003-2024 Toyota 4Runner, 2007-2015 FJ Cruiser 2WD 4WD, 3" Front 2" Rear Full Leveling Spring Spacer Lift Kits with Differential Kit

#9

9. PraOents 3/2 Spacer Kit

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Staggered Front-Rear Lift.

Why it ranks #9: Lists 3-inch front and 2-inch rear lift for 2003–2024 4Runner and FJ Cruiser 4WD models, but provides fewer component details.

The 3-inch front and 2-inch rear spacer configuration gives eligible 4Runner and FJ Cruiser owners a clearly specified lift split for changing stance and off-road clearance. PraOents identifies the kit for 4WD applications and cautions that lift height differs from spacer thickness because suspension geometry affects the resulting height.

This kit is listed for 2003–2024 Toyota 4Runner and 2007–2015 FJ Cruiser 4WD models, which narrows its stated fitment compared with kits that list both drivetrains. The 3-inch front and 2-inch rear lift figures provide a concrete stance target, while the manufacturer’s warning that lift height is not spacer thickness helps set expectations when interpreting dimensions. Alloy steel is the listed material; the supplied details do not identify a broader set of suspension components.

Skip it if you need listed 2WD compatibility; maXpeedingrods’ 2003–2024 spacer kit explicitly covers both 2WD and 4WD 4Runners.

Consider this for a listed 4WD 4Runner or FJ Cruiser when a 3-inch front and 2-inch rear spacer lift matches your stance goal. Keep in mind lift height differs from spacer thickness.

Listed on Amazon as: Leveling Lift Kit for 2003-2024 4Runner, 2007-2015 FJ Cruiser, 3 inch Front and 2 inch Rear Strut Spacers Leveling Kit

#10

10. maXpeedingrods 1996–2002 Kit

• Weight: 18500 g
• Material: Steel
• Material Type: Steel

Best for: Early 2WD Or 4WD Upgrade.

Why it ranks #10: Its 3-inch kit fits 1996–2002 2WD and 4WD 4Runners and targets 31-inch tires, but listed included components are limited to shocks.

Compatibility with both 2WD and 4WD 1996–2002 Toyota 4Runners sets this 3-inch suspension kit apart within its model range. Its steel construction has a powder-coated finish intended to resist corrosion and rust, while the lift raises ground clearance to accommodate 31-inch tires for owners planning an off-road-oriented setup.

The 3-inch suspension lift is specified to increase ground clearance and allow 31-inch tires, giving owners a clear target when planning tire changes and trail use. High-strength steel with a frosted, powder-coated finish is described as helping resist corrosion and rust, a practical consideration for exposed suspension parts. The included-component listing names shocks, so check the supplied contents against your planned installation needs before treating it as a full set of replacement suspension components.

Skip it if you need a listed complete set of lift hardware; Rough Country’s 1996–2002 4WD kit names springs, struts, shocks, and mounting hardware.

Choose this for a 1996–2002 2WD or 4WD owner seeking a 3-inch lift and 31-inch tire clearance. The contents listing names shocks, so it may not suit buyers expecting every lift component in the box.

Listed on Amazon as: maXpeedingrods 3" Suspension Lift Kit for Toyota 4-Runner 1996-2002