Best Hay Cradle For Cattle: 10 Wall Racks and Feeders Compared

#1 · Best Overall

1. Lazaluking Iron Hay Rack

• Dimensions: 31.5"L x 17"W x 15"H
• Capacity: 67 gallons
• Material Type: Metal

Best for: Large multi-animal wall rack.

Why it ranks #1: Its metal wall-mounted rack lists cattle as suitable livestock and states 67-gallon capacity, making it the most direct large-rack fit.

A 67-gallon capacity gives the Lazaluking rack room to hold hay for multiple goats, cows, or horses at once, reducing how often a shared feeding station needs refilling. Its 35.5-inch-long steel frame suits farms looking for a sizable wall-mounted holder for indoor or outdoor use.

The wide top opening makes loading hay straightforward, while open middle slats provide animals access to the feed. Its metal construction is described as less easily damaged by animals than plastic racks or bags, and the steel frame is intended to resist deformation and rust. At 35.5 inches long, the rack offers a substantial wall-mounted feeding point; check the listed dimensions against the available wall space before installation.

Skip it if you need a floor-standing feeder or a separate lower grain tray; this model is a wall-mounted hay rack.

Choose this Lazaluking rack if several goats, cattle, or horses share a wall-mounted hay station and its large capacity suits your feeding routine. Its 35.5-inch length and wall-mount format make available installation space an important fit consideration.

Listed on Amazon as: Goats Hay Feeder, 35.5'' Long, Heavy Duty Iron Wall Hay Rack, Blanket Holder, Large Capacity for Goats,Horses,Cattle and Other Livestock, Farm Indoor and Outdoor Use, Black

#2 · Best Cattle-Specific Rack

2. Meyoppm Wall Hay Feeder

• Dimensions: 30"L x 9.45"W x 15.7"H
• Capacity: 20 gallons
• Material Type: Carbon steel

Best for: Space-saving 20-gallon wall rack.

Why it ranks #2: The listing explicitly recommends it for cattle and gives a 20-gallon capacity, carbon-steel construction, and included mounting kit.

A 30-inch wall-mounted format lets the Meyoppm feeder use fence, barn, or patio wall space instead of occupying the ground. Its 20-gallon capacity and carbon-steel construction offer a defined hay-holding option for goats, horses, and cattle, with a rust-resistant coating for outdoor conditions.

Mounting the feeder on a fence or wall is intended to reduce clutter and keep the feeding area tidier. The 20-gallon capacity provides a specific hay-holding size, while rugged carbon steel and a rust-resistant coating are described for outdoor use and resistance to chewing and corrosion. The 30-by-9.45-by-15.7-inch dimensions give buyers a relatively narrow listed profile to assess against their chosen mounting surface; a mounting kit is included.

Skip it if you need hay and grain in one wall station; Garvee's 2-in-1 rack separates hay above from grain below.

The Meyoppm feeder suits buyers who want a 20-gallon wall-mounted hay holder for goats, horses, or cattle and wish to free ground space. Check that its 9.45-inch depth and mounting location suit your setup.

Listed on Amazon as: 30'' Metal Wall Mount Hay Feeder, 20 Gallon Livestock Feeder

#3 · Best Dual-Feed Setup

3. IDEALHOUSE Hay and Grain Feeder

• Dimensions: 22.36"L x 13.03"W x 23.74"H
• Capacity: 248 kg

Best for: Dual-compartment wall feeder.

Why it ranks #3: Its wall-mounted upper hay rack and lower grain bin are listed for cattle, sheep, goats, and horses; dimensions are 22.36 by 13.03 by 23.74 inches.

An upper hay rack paired with a lower grain bin gives the IDEALHOUSE feeder two separate feeding areas in one wall-mounted unit. The arrangement is listed for goats, sheep, horses, and cattle, while raising feed off the ground is intended to save barn space and keep it away from dirt and mud.

The separate upper rack and lower bin let buyers offer hay and grain at one station, supporting more variety without placing both feed types on the ground. Wall mounting lifts the feeder to free floor space and is described as helping protect feed from dirt, mud, and contamination. Its dimensions are 22.36 by 13.03 by 23.74 inches, and the weather-resistant feature supports outdoor conditions; weigh its 20.5-pound weight when planning installation.

Skip it if you want a floor-standing trough rather than a wall unit; ActiveTrail's listed product is a livestock feeding trough.

IDEALHOUSE fits buyers seeking a wall-mounted hay-and-grain station for goats, sheep, horses, or cattle. Its 20.5-pound weight and 22.36-by-13.03-inch dimensions are relevant when choosing a mounting surface and location.

Listed on Amazon as: Wall Mounted Hay Rack, 2 in 1 Hay & Grain Livestock Feeder

#4 · Best Galvanized Trough

4. ActiveTrail Steel Feeding Trough

Best for: Long galvanized steel trough.

Why it ranks #4: This heavy-duty galvanized-steel trough explicitly suits cattle and provides a stated 22-gallon capacity, though it is a trough rather than a wall rack.

At 45 inches long, the ActiveTrail feeder offers an extended galvanized-steel trough for shared livestock feeding, with a stated 22-gallon capacity. Its black powder coating is described as resisting rust and corrosion, a useful combination for farms feeding sheep, goats, horses, cattle, or other listed livestock.

The stated 22-gallon capacity is presented for feed for up to 10 sheep, which can reduce frequent refills when feeding a group. Heavy-duty galvanized steel and a black powder coating are specified to resist rust and corrosion, supporting use in tough weather conditions. The 45-inch trough provides a long feeding area, but the supplied dimensions differ between the title details and specifications, so use the product listing to assess fit.

Skip it if you need a wall-mounted hay rack with a lower grain compartment; Garvee's 2-in-1 wall rack provides separate hay and grain areas.

Consider this ActiveTrail trough for group feeding when a long steel feeding surface and stated 22-gallon capacity suit your herd. It is a trough rather than a described wall rack, and the conflicting dimensions warrant checking the listing for fit.

Listed on Amazon as: 22 Gallon Capacity Livestock Feeder, 45" Hay Feeder for 10 Sheep Once, Heavy Duty Steel Livestock Feeding Trough for Horse, Goat, Sheep, Cattle, Cow, Alpaca, Black

#5

5. UNCOJOY Iron Hay Rack

• Dimensions: 23.6"L x 12.6"W x 18.9"H
• Capacity: 18 gallons
• Material Type: Iron

Best for: Compact wall-mounted hay rack.

Why it ranks #5: The 18-gallon iron wall rack lists cows among its intended animals and has a curved-corner design; it is smaller than the leading cattle-listed options.

A compact 18-gallon capacity and 23.6-inch length make the UNCOJOY rack a smaller wall-mounted option for goats, cows, or horses. Its solid round steel construction and curved corners pair a sturdy feeding holder with a shape intended to avoid harming animals.

The rack mounts to a wooden fence or brick wall, giving buyers options for placing hay off the ground in a courtyard or room. Its 18-gallon capacity provides a defined holding size, while the solid, welded round-steel frame is described as resisting rust and deformation. Curved corners are intended to protect animals, and manual assembly is required; the included bolts, nuts, and drywall anchors support setup on suitable surfaces.

Skip it if you want hay and grain in separate compartments; IDEALHOUSE's wall-mounted 2-in-1 feeder has an upper rack and lower grain bin.

This UNCOJOY rack fits buyers seeking a compact wall-mounted hay holder for goats, cattle, or horses. Its 18-gallon capacity and manual assembly are practical boundaries to weigh when planning the feeding location and setup.

Listed on Amazon as: Goat Hay Feeder, 18 Gallon Hay Rack

#6 · Most Compact Wall Rack

6. VEVOR Steel Hay Rack

• Material Type: Carbon Steel

Best for: Rounded-edge steel wall rack.

Why it ranks #6: Its 18.5-gallon, 23.62-inch-wide wall-mounted steel rack has rounded edges and powder coating, but the listing does not specifically name cattle.

Rounded edges and corners are the VEVOR rack's defining safety detail, intended to reduce the risk of animals getting hurt while feeding. Its 18.5-gallon capacity and multiple-sided feeding format make it a wall-mounted option for sheep and other farm livestock indoors or outdoors.

The 18.5-gallon capacity is described as enough to feed livestock for a whole day with one fill, which can reduce feeding frequency. Cold-rolled steel with full welding gives the rack a sturdy construction, while its powder coating is specified for rust resistance and outdoor use. At 23.62 inches wide and 19.69 inches high, it offers a defined wall-rack footprint; compare those dimensions with the intended mounting location before installation.

Skip it if you need a larger stated capacity; BUYYAH's pasture feeder lists 35 gallons split between grass and shredded grass.

This VEVOR rack fits buyers prioritizing rounded edges, a welded steel frame, and an 18.5-gallon wall-mounted feeding point. Its capacity and 23.62-inch width help define whether it suits your animals and available wall space.

Listed on Amazon as: VEVOR Livestock Feeder, 18.5 Gallons Large Capacity, Heavy-Duty Steel Goat Hay Rack, 24.4" Long Wall Mounted Horse Hay Holder, Multiple Sided Feeding Rack for Sheep Farm Livestock Indoor Outdoor

#7

7. BUYYAH Livestock Hay Feeder

• Dimensions: 30.1"L x 22.4"W x 29.5"H
• Capacity: 35 gallons
• Material Type: Metal

Best for: Fabric-trough pasture feeder.

Why it ranks #7: The 35-gallon station combines a metal frame with a thickened nylon feeding trough, but its listing does not specifically identify cattle.

A thickened nylon fabric trough catches grass in the BUYYAH feeder, giving animals a quick-access feeding point while helping keep feed from being wasted. Its 35-gallon total capacity is split between 30 gallons of grass and five gallons of shredded grass for a larger pasture feeding setup.

The split capacity lets buyers load 30 gallons of grass alongside five gallons of shredded grass, combining two feed forms in one station. BUYYAH says a single feeding can provide animals with food for several days, though actual use depends on the feeding routine. The 30.1-by-22.4-by-29.5-inch feeder has a metal frame and nylon fabric trough; take care during assembly and disassembly because safety information warns of sharp edges or heavy components.

Skip it if you prefer a solid metal tray for catching loose hay; Lazaluking's 2-in-1 feeder has a metal catch tray beneath its rack.

Choose the BUYYAH feeder if its 30-gallon grass and five-gallon shredded-grass split suits your feeding routine. Its nylon trough and listed assembly caution are worth considering alongside the 30.1-by-22.4-inch footprint.

Listed on Amazon as: Livestock Hay Feeder 35 Gallon

#8

8. Lazaluking 2-in-1 Feeder

• Dimensions: 30"L x 22.5"W x 30"H
• Capacity: 35 gallons
• Material Type: Metal

Best for: Hay-and-grain station.

Why it ranks #8: This 35-gallon metal station combines a hay rack and grain tray, but the provided listing targets goats rather than specifically naming cattle.

A solid metal catch tray is the defining feature of this Lazaluking feeder: it collects loose hay beneath the rack rather than letting it fall through a fabric or mesh bottom. The 2-in-1 setup also gives goats and other livestock a lower place for grain or shredded feed.

Load grass or hay into the upper rack and grain or shredded feed into the lower tray to keep both feed types at one station. The metal tray is intended to catch loose hay, helping keep it available rather than on the ground. At 30 by 22.5 by 30 inches, this feeder takes a substantial footprint, while its listed mounting hardware supports wall installation; account for both needs when planning placement.

Skip it if you need a compact 18-gallon rack; UNCOJOY's 18-gallon wall-mounted feeder has smaller listed dimensions.

This Lazaluking model suits buyers who want hay and grain together, with loose hay caught by a solid lower tray. Choose it when the 30-by-22.5-by-30-inch form and wall-mounted placement fit your feeding area.

Listed on Amazon as: Hay Feeder for Goats, 2-in-1 Heavy Duty Livestock

#9

9. Garvee Wall Hay Rack

Best for: Weather-resistant dual-feed rack.

Why it ranks #9: The galvanized-steel wall feeder stores hay above grain, but its stated intended animals are goats, small sheep, and other small or medium livestock.

Galvanized steel with a rust-proof coating anchors Garvee's wall-mounted 2-in-1 feeder, which separates hay above from grain below. That arrangement gives goats, small sheep, and other small or medium livestock two feed types at one station, while the angled, reinforced tube design supports natural feeding access.

The upper hay area and lower grain section combine two feeding tasks without requiring separate stations. Garvee specifies heavy-duty galvanized steel and a rust-proof coating for weather resistance, supporting placement in varied environmental conditions. Its listed dimensions are 13.03 inches deep, 22.36 inches wide, and 23.74 inches high, so buyers can assess wall space before setup. The product is described for small and medium-sized livestock, a useful boundary when matching it to animals.

Skip it if you need a 45-inch-long trough for a large group; ActiveTrail lists a 45-inch feeder with capacity stated for up to 10 sheep.

Garvee suits buyers seeking a weather-resistant wall station for hay and grain for goats, small sheep, or similar livestock. Its 22.36-inch width and specified animal-size range are key fit considerations.

Listed on Amazon as: Garvee Wall Mount Hay Rack, 2 in 1 Hay and Grain Livestock Feeder

#10

10. Jojoka Corner Hay Feeder

Best for: Two-piece corner feeder set.

Why it ranks #10: This two-piece galvanized-steel corner rack is described for goats, sheep, and horses, with no stated cattle suitability or capacity.

Two corner-mounted racks come in this Jojoka set, offering a way to place hay at two corners rather than relying on one feeding point. The galvanized-steel construction has a rust-resistant coating, and the slatted design is intended to control hay distribution for goats, sheep, and horses.

The corner format can make use of wall junctions in farm spaces, while the slatted design is intended to manage hay distribution and minimize waste. Galvanized steel with a rust-resistant coating supports indoor or outdoor use according to the product description. Each feeder is listed at 29.5 by 13.8 by 26.7 inches, so buyers can compare the dimensions with their corner locations. The supplied components list a hay rack, and installation details are not specified.

Skip it if you need a listed capacity and dimensions for a single rack; VEVOR specifies an 18.5-gallon wall-mounted feeder with listed measurements.

Jojoka suits farms that can use two corner-mounted hay points for goats, sheep, or horses. Its 29.5-by-13.8-by-26.7-inch listed size and corner placement make the available wall junctions important fit considerations.

Listed on Amazon as: Goats Hay Feeder, 2 Pcs Corner Livestock Feeder, Blanket Holder