Best Atv Cup Holder for Different Mounts and Drink Sizes

#1 · Best Overall

1. EDSRDUX Universal Cup Holder

• Dimensions: 4.3"L x 4.3"W x 4"H
• Material: Aluminum, Nylon

Best for: Large-cup bar clamp.

Why it ranks #1: Explicitly fits ATVs, clamps to 0.6-1.5-inch tubes, and has a 3.85-inch holder diameter with a listed capacity of at least 3 pounds.

A 3.85-inch holder diameter gives the EDSRDUX room for larger cups, while its aluminum clamp fits bars and tubes from 0.6 to 1.5 inches. That combination makes it a practical option for ATV riders carrying cans, soft drinks, or stainless steel bottles on compatible handlebars.

The 0.6- to 1.5-inch clamp range covers a variety of handlebars and tubes, including those on ATVs, motorcycles, bicycles, wheelchairs, and golf carts. Its 3.85-inch diameter gives containers more room than a narrow cup opening, while the stated capacity of at least 3 pounds supports the listed beer cans, soft drinks, and stainless steel bottles. Aluminum and nylon are the specified materials; the included clamp is the listed component.

Skip it if you want a holder that narrows around smaller cups; the Fodsports ZJ01 adjusts from 2.08 to 3.6 inches.

Choose this for an ATV or other compatible ride when a roomy 3.85-inch opening and higher stated load capacity suit your drink. Its clamp must meet the 0.6-1.5-inch bar range, and the opening is not described as adjustable.

Listed on Amazon as: Universal Cup Holder, 0.6"-1.5" Aluminum Clamp for ATV, Motorcycle, Bike

#2 · Adjustable Metal Fit

2. KEMIMOTO Upgraded Metal Holder

• Dimensions: 7.48"L x 6.3"W x 3.15"H
• Capacity: 1.8 lb
• Material: Metal, Polypropylene

Best for: 12-28-ounce drink carrier.

Why it ranks #2: Designed for ATV use with a 0.6-1.56-inch bar fit and an adjustable holder diameter up to 3.5 inches for 12-28-ounce cups.

A stated 28-ounce maximum load and accommodation for 12- to 28-ounce cups make this KEMIMOTO a clearly sized choice for ATV drink carrying. The holder adjusts up to 3.5 inches across, and its metal clamp fits bars from 0.6 to 1.56 inches.

The 3.5-inch maximum holder diameter accommodates a range of cup widths, while its 12- to 28-ounce drink range helps set expectations for container size and load. The metal clamp fits 0.6- to 1.56-inch bars, making that measurement central to installation planning. Metal and polypropylene are the listed materials. Together, the adjustable opening and bar range give buyers two practical checks before mounting it: cup diameter and handlebar size.

Skip it if you carry a drink larger than 28 ounces; the KEMIMOTO B095YX9811 is listed as a 32-ounce holder.

This is a fit for ATV riders whose drinks fall within the 12-28-ounce range and whose bars measure 0.6-1.56 inches. Measure both the mounting bar and cup before selecting this adjustable metal-and-polypropylene holder.

Listed on Amazon as: KEMIMOTO Upgraded Motorcycle Cup Holder 3.5" Adjustable Bike Bottle Holder | Universal 0.6”-1.56” Bar Fit, 12-28oz Metal Clamp, Shatterproof, for ATV Motorcycle Scooter Walker Bike Golf Cart (1)

#3 · Broad Cup Adjustment

3. FODSPORTS Adjustable Holder

• Dimensions: 3.7"L x 3.2"W x 4.6"H
• Capacity: 2 lb
• Material: Aluminum, Plastic

Best for: Adjustable-cup ATV riders.

Why it ranks #3: Lists ATV compatibility, 360-degree mounting, and an adjustable 2.08-3.6-inch cup range; its metal clamp fits 0.5-1.57-inch bars.

The Fodsports holder adjusts from 2.08 to 3.6 inches at the cup, letting riders accommodate different bottles, mugs, and handled cups without changing holders. Its clamp fits bars or tubes from 0.5 to 1.57 inches, while 360-degree mounting supports different installation orientations on an ATV.

The bottom adjustment knob changes the holder width, so switching among compatible drink containers is straightforward. Its metal clamp covers 0.5- to 1.57-inch mounting surfaces, and the 360-degree omni-directional mounting adds flexibility when a bar position does not align neatly with the cup. The listed capacity is 2 pounds, a useful boundary when choosing a drink. Aluminum and plastic construction keeps the holder's listed materials simple, and installation tools are included.

Skip it if you need a listed capacity above 2 pounds; the EDSRDUX Universal Cup Holder specifies at least 3 pounds.

This suits ATV riders who switch between bottle and mug sizes and need flexible mounting orientation. Check that the mounting tube falls within the 0.5-1.57-inch clamp range and keep the drink within its 2-pound capacity.

Listed on Amazon as: FODSPORTS Motorcycle ATV Cup Holder, Upgraded Motorcycle Drink Holder with 0.5-1.57" Metal Clamp, Universal Water Bottle Holder for Bike Scooter Boat Stroller Golf Push Cart Wheelchair Tractor

#4 · Anti-Theft Design

4. Kewig W-3 Holder

• Capacity: 2 lb
• Material: PA66+GF high-strength composite material

Best for: Anti-theft adjustable mount.

Why it ranks #4: Names ATV and UTV compatibility, adjusts for 1.96-3.5-inch cups, and includes an anti-theft wrench with a listed one-year warranty.

The Kewig W-3 combines a 1.96- to 3.5-inch adjustable opening with an anti-theft wrench, letting ATV riders size the holder to different cups while securing its clamp during installation. Its 360-degree rotation adds positioning flexibility across the listed vehicle types.

A knob adjusts the holder width across 1.96-3.5 inches, helping fit bottles, coffee mugs, beer bottles, and sports cups. The clamp includes rubber anti-slip pads for grip, and the supplied anti-theft wrench is intended for the mounting hardware. Rotation through 360 degrees lets riders orient the holder after fitting it. Its maximum weight capacity is 2 pounds, so that limit should guide drink choice even when a container fits the opening.

Skip it if you need a stated capacity above 2 pounds; the EDSRDUX Universal Cup Holder specifies at least 3 pounds.

Choose the W-3 for an ATV setup where adjustable sizing, rotating position, and an anti-theft wrench matter. Its 2-pound weight limit still applies, so check drink weight as well as the 1.96-3.5-inch diameter range.

Listed on Amazon as: Kewig Motorcycle Cup Holder, Anti-Theft Bike Water Bottle Holder

#5

5. DEGUM Adjustable Holder

• Dimensions: 3.54"L x 2.56"W x 5"H
• Capacity: 32 fluid oz
• Material: Aluminum, Thickened ABS Material

Best for: Large-bottle adjustable holder.

Why it ranks #5: An ATV-oriented adjustable holder for 12-32-ounce drinks, with a 2.08-3.6-inch cup range and aluminum alloy and thickened ABS construction.

The DEGUM adjusts from 2.08 to 3.6 inches and is listed for bottles and cups from 12 to 32 ounces, giving ATV riders flexibility across common drink sizes. Its aluminum-alloy and thickened-ABS construction pairs with a bottom adjustment knob for changing the fit.

The bottom knob changes the holder diameter from 2.08 to 3.6 inches, helping accommodate different bottle and cup widths without relying on a fixed opening. Its listed 12-32-ounce range offers a clear size guide for ATV drink choices. Aluminum alloy and thickened ABS are the specified materials, and the package includes an installation tool. The listed capacity is 32 fluid ounces; buyers should distinguish that volume rating from the weight their mounting setup will carry.

Skip it if you need a stated mounting-bar diameter range before choosing; the Kewig W-3 lists ATV compatibility and an anti-theft wrench.

This is suited to ATV riders who want a knob-adjusted opening for drinks up to the listed 32-ounce size. The supplied details do not give a clamp diameter range, so mounting fit remains the key consideration.

Listed on Amazon as: Upgraded Motorcycle ATV Cup Holder Anti Theft Bike Water Bottle Holder

#6 · Swivel Mount

6. FPN Heavy Duty Holder

• Dimensions: 4"L x 2.8"W x 6.3"H
• Capacity: 32 fluid oz
• Material: Aluminum, Plastic

Best for: RAM-ball swivel setups.

Why it ranks #6: Lists ATV use, a 32-fluid-ounce capacity, dual 360-degree swivel positioning, and included handlebar U-bolt base, arm, and 1-inch ball.

A universal 1-inch ball base and dual 360-degree swivel give the FPN holder flexible positioning on vertical, horizontal, or angled bars. Its width adjusts from 2.36 to 3.54 inches, so ATV riders can accommodate a range of containers while orienting the drink toward their preferred access point.

The rubber-coated ball head and 1-inch ball base allow multi-angle positioning, and the listed compatibility with RAM mounting systems may suit riders already using that setup. The adjustable 2.36- to 3.54-inch holder width accommodates varied container diameters, while the included 3.54-inch aluminum-alloy arm and handlebar U-bolt base provide the mounting pieces. Aluminum and plastic are the holder materials. Check the stated 32-fluid-ounce capacity against the drink you plan to carry.

Skip it if you carry bottles narrower than 2.36 inches; the Kewig W-3 adjusts from 1.96 inches.

This suits ATV riders who want swivel positioning or a 1-inch RAM-compatible ball base. Its 2.36-3.54-inch width range and 32-fluid-ounce capacity are the key boundaries to check against your usual container.

Listed on Amazon as: Heavy Duty Motorcycle Cup Holder, Metal Handlebar Mount for Harley Bike ATV

#7

7. KEMIMOTO Oxford Holder

• Dimensions: 5.12"L x 4.33"W x 4.33"H
• Capacity: 1.5 lb
• Material: Fabric

Best for: Secure-clamp fabric holder.

Why it ranks #7: Specifically lists ATV/UTV compatibility and an upgraded adjustable clamp for 0.6-1.5-inch poles; its stated capacity is 1.5 pounds.

KEMIMOTO’s upgraded alligator clamp uses two screws instead of one and adds a cross-mounting hole, addressing clamp stability for riders carrying larger bottles. It adjusts to poles from 0.6 to 1.5 inches and can be set at a 90-degree angle for varied mounting positions.

The two-screw clamp and cross-mounting hole are intended to resist loosening, spinning, and movement while carrying a large-capacity bottle. Its 90-degree adjustability helps orient the fabric holder around a compatible ATV pole, while the 0.6- to 1.5-inch range defines the mounting fit. Oxford fabric provides a flexible alternative to a rigid cup body. The listed capacity is 1.5 pounds, so container weight is an important consideration before loading it.

Skip it if you carry drinks exceeding 1.5 pounds; the KEMIMOTO B08R6VT4FQ lists a 28-ounce maximum load.

This fits ATV riders who value a fabric holder and a clamp with added screw security. Confirm the pole is within its 0.6-1.5-inch range and keep the full drink load within the listed 1.5-pound capacity.

Listed on Amazon as: KEMIMOTO Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder with 0.6"-1.5" Alligator Clamp, Universal Water Bottle Cup Accessories for Bike, ATV/UTV, Scooter, Boat, Walker

#8

8. KEMIMOTO 32oz Fabric Holder

• Dimensions: 3.9"L x 3.9"W x 7.8"H
• Capacity: 946 ml
• Material: 600D Oxford Fabric

Best for: Fabric holder with storage.

Why it ranks #8: Lists ATV use, 32-ounce capacity, a 7.8-inch-tall fabric holder, and a 5.5-inch-high front pocket for small personal items.

A 7.8-inch Oxford-fabric holder with a 5.5-inch front pocket gives the KEMIMOTO room for a large drink plus small personal items. Its aluminum-foil lining makes cleanup easier and helps keep drinks hot or cold for a short duration on ATV and other trips.

The 7.8-inch height accommodates large cups, while the front pocket separates small belongings from the drink space. An aluminum-foil liner is intended to make cleaning easier and provide short-duration temperature retention, a practical detail for rides where the drink stays in the holder. The alligator clamp is the mounting style, and the product is listed for ATV, UTV, scooter, boat, kayak, bike, and walker use. Its 32-ounce capacity sets the drink-size boundary.

Skip it if you need drinks kept hot or cold for an extended period; the KEMIMOTO B08R6VT4FQ is a rigid adjustable holder for 12-28-ounce cups.

This fits ATV riders who want a fabric drink holder with a separate pocket and easier-cleaning liner. Its insulation benefit is short-duration, and the 32-ounce capacity and alligator-clamp mounting should suit your setup.

Listed on Amazon as: KEMIMOTO Motorcycle & ATV Cup Holder-32oz Drink Holder with Alligator Clamp, UTV, Scooter, Boat, Kayak, Bike, Walker, Black

#9

9. RAM MOUNTS Tough-Claw Cup Holder

• Capacity: 16 oz
• Material: High Strength Composite

Best for: Self-leveling trail drinks.

Why it ranks #9: Its self-leveling holder has two pivot points and a compact Tough-Claw base, but the listed compatible drink size is limited to 12-16 ounces.

Two pivot points let the RAM MOUNTS Level Cup keep a drink upright as the mount shifts, a useful feature for uneven ATV travel. The kit combines a small Tough-Claw base with a self-leveling holder and included koozie, and accepts compatible 12- to 16-ounce drinks.

The self-leveling holder’s two pivot points help keep a drink upright, while the Tough-Claw base provides the mounting component for a range of applications that includes motorcycles, kayaks, boats, and bicycles. Its compatible drink size is 12-16 ounces, with dimensions of 2.5-3.5 inches. That narrower range is worth checking against the container you carry. The compact design supports installation in varied applications, but the supplied facts do not describe a broader cup-size adjustment.

Skip it if you use cups outside its 12-16-ounce range; the Fodsports ZJ01 adjusts for cups from 2.08 to 3.6 inches.

Pick this for an ATV rider who prioritizes a self-leveling drink position and carries compatible 12-16-ounce containers. Check the 2.5-3.5-inch drink dimensions and whether the Tough-Claw mounting arrangement suits your setup.

Listed on Amazon as: RAM MOUNTS Tough-Claw Cup Holder with B Size 1" Ball, Self-Leveling

#10

10. ZILIALAR Adaptive Cup Holder

• Dimensions: 3.35"L x 2.95"W x 6.49"H

Best for: Lightweight rotating drink mount.

Why it ranks #10: Mentions ATV use and 360-degree rotation, but its listed 0.87-1.26-inch handlebar fit is narrower than several other options.

A 360-degree rotating mount and one-touch lock make the ZILIALAR easy to orient and secure, while its 1.4- to 2.9-inch range targets narrower bottles and cups. At 204 grams, its high-strength engineering-plastic construction keeps the listed holder lightweight for ATV and other rides.

The opening adjusts for containers from 1.4 to 2.9 inches in diameter, helping riders match the holder to bottles, coffee cups, or sports drinks within that range. A 360-degree rotation feature and one-touch lock support setup and positioning, while the 0.87- to 1.26-inch handlebar fit sets the mounting boundary. High-strength engineering plastic is described as durable, light, and shockproof. Weighing 204 grams, it is a compact choice, but its narrower container range is worth checking first.

Skip it if you carry cups wider than 2.9 inches; the Fodsports ZJ01 adjusts up to 3.6 inches.

This suits ATV riders seeking a lightweight rotating mount for narrower bottles and cups. Check that the handlebar measures 0.87-1.26 inches and the container stays within the 1.4-2.9-inch opening range.

Listed on Amazon as: Adaptive Cycling & Motorcycle Cup Holder – Universal Bike/ATV/Boat Drink Mount, 360° Rotation, Fits 0.87"-1.26" Handlebars & 1.4"-2.9" Bottles