Best Anti Syphon Valve For Garden Hose

Best Anti Syphon Valve For Garden Hose

A strong garden hose anti-siphon valve prevents contaminated water from flowing back into the potable supply, and the right choice depends on your faucet threads and setup. For a standard hose bib, choose a 3/4-inch hose-thread brass vacuum breaker; Eastman 20199 leads with a brass body, self-draining mechanism, and break-off screw for permanent installation. This roundup also includes multi-packs, a lead-free brass self-draining model, and a drip-irrigation backflow preventer.

Before ordering, distinguish a standard 3/4-inch hose connection from Dreyoo’s 1-1/16-inch fine-thread inlet, which is intended as a replacement for a compatible faucet. Check the product’s thread orientation and any local requirements, since a listed feature or certification does not confirm that a valve fits every installation.

Eastman 20199 is the best overall choice for a typical garden hose bib because it combines a heavy-duty brass body, a self-draining mechanism, and 3/4-inch female hose thread by 3/4-inch male hose thread connections. Its break-off screw is intended for permanent installation, making it a straightforward fit for a standard hose-bib setup. If you need more than one valve or a lead-free option, the ranked alternatives offer those specific features.

Our Top Picks

Eastman 20199Best Overall

Eastman 20199

Its 3/4-inch FHT-to-MHT connections suit a standard hose bib, while the brass body, self-draining mechanism, and break-off screw cover key needs.

View on Amazon
Homewerks Vacuum BreakerCertified Brass

Homewerks Vacuum Breaker

This brass 3/4-inch hose-thread breaker is listed as meeting ASSE 1011, CSA B64.2, and ANSI/NSF 61-9 standards.

View on Amazon
Boltigen Self-Draining BreakerLead-Free Option

Boltigen Self-Draining Breaker

Its 3/4-inch GHT female-to-male connections and lead-free brass construction suit standard outdoor faucets, with self-draining operation.

View on Amazon

Compare the Top Garden Hose Anti-Siphon Valves

#ProductMaterialMaterial TypeSizeThread SizeBuy
1
Eastman 201991. Eastman 20199Best Overall
BrassBrass3/4 Inch FHT x 3/4 Inch MHTthread.sizeView on Amazon
2BrassBrass3/4 Inch.0.75 NPTView on Amazon
3BrassBrass3/4'' GHT Female to 3/4'' GHT Male0.75 inchView on Amazon
4BrassBrass2-Pack Vacuum Breaker Set3/4 inchView on Amazon
5BrassBrass2 Pack—View on Amazon
6
Xiny Tool Vacuum Breaker6. Xiny Tool Vacuum BreakerBrass two-pack for garden spigots
BrassBrass3/4 inch0.75 inchView on Amazon
7
SUNROAD Brass Breaker7. SUNROAD Brass BreakerMulti-spigot household setup
BrassBrass3/4 inch3/4 inchView on Amazon
8
GBQA Brass Breaker8. GBQA Brass BreakerCertified two-piece hose set
BrassBrass3/4 inch0.75 inchView on Amazon
9
Dreyoo Fine-Thread Breaker9. Dreyoo Fine-Thread BreakerFine-thread faucet replacement
BrassBrass1-1/16"1-1/16"View on Amazon
10
Raindrip R620CT10. Raindrip R620CTDrip irrigation source connection
Stainless Steel;Polyvinyl Chloride…Stainless Steel;Polyvinyl Chloride…No Size3/4 inchView on Amazon

Detailed Reviews: Best Anti Syphon Valve For Garden Hose

Eastman 20199

#1 · Best Overall

1. Eastman 20199

  • Material: Brass
  • Material Type: Brass
  • Size: 3/4 Inch FHT x 3/4 Inch MHT
  • Thread Size: thread.size

Best for: Permanent brass hose bib installation.

Why it ranks #1: Its 3/4-inch FHT-to-MHT connections suit a standard hose bib, while the brass body, self-draining mechanism, and break-off screw cover key needs.

A break-off screw makes the Eastman vacuum breaker a fit for hose bibs where a permanent attachment is the priority. Its heavy-duty brass body provides a sturdy fitting, while the self-draining mechanism lets water drain when the faucet is shut off.

The 3/4-inch female hose-thread inlet and 3/4-inch male hose-thread outlet provide a direct hose-bibb connection, and the break-off screw supports permanent installation once positioned. That setup suits a faucet you want protected without repeatedly removing the device. The self-draining mechanism releases water upon shutoff, adding a practical step for outdoor use. Its brass body is specified as corrosion-free, giving this compact fitting a durable material choice for a hose connection.

Pros
  • Break-off screw for permanent installation
  • Self-draining mechanism works at shutoff
  • Heavy-duty brass body
  • 3/4-inch FHT inlet and 3/4-inch MHT outlet
Cons
  • Single fitting only; no spare washers or tape are listed.

Skip it if you need multiple fittings from one purchase; SUNROAD's 3-pack supplies three vacuum breakers.

Choose this Eastman fitting for a single hose bib where permanent attachment and shutoff drainage matter. Its 3/4-inch female-to-male hose-thread sizing is the relevant fit check for your faucet and hose setup.

Full product details
BrandEastman
ColorBrass
Included Componentshose bib vacuum breaker
Item Dimensions1.5 x 1.7 x 0.5 inches
Item Weight0.27 g
Dimensions1.5 x 1.7 x 0.5 inches
ManufacturerEastman
Part Number20199
Manufacturer Warranty DescriptionNo_warranty
MaterialBrass
Model Number20199
Size3/4 Inch FHT x 3/4 Inch MHT
Thread Sizethread.size
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: Eastman 3/4 Inch FHT x 3/4 Inch MHT Hose Bibb Anti Siphon Vacuum Breaker, Brass Plumbing Fitting, 20199

View on Amazon
Homewerks Vacuum Breaker

#2 · Certified Brass

2. Homewerks Vacuum Breaker

  • Material: Brass
  • Material Type: Brass
  • Size: 3/4 Inch.
  • Thread Size: 0.75 NPT

Best for: Standards-focused brass fitting.

Why it ranks #2: This brass 3/4-inch hose-thread breaker is listed as meeting ASSE 1011, CSA B64.2, and ANSI/NSF 61-9 standards.

ASSE certification and stated compliance with plumbing standards distinguish the Homewerks brass vacuum breaker for buyers comparing documented requirements. Its 3/4-inch male hose-thread sizing is described as compatible with most standard hose-end valves and garden hoses, supporting common outdoor hose connections.

The brass construction gives this fitting a durable material specification, while its 3/4-inch size is listed as compatible with most standard hose-end valves and garden hoses. Homewerks states that it meets ASSE 1011/CSA B64.2 and ANSI/NSF 61-9, which can help buyers screen for relevant standards when selecting a backflow-prevention fitting. The package lists one vacuum breaker, so it suits a single connection point rather than a multi-faucet setup.

Pros
  • Brass construction
  • Meets ASSE 1011/CSA B64.2
  • Meets ANSI/NSF 61-9
  • Listed as compatible with most standard hose-end valves and garden hoses
Cons
  • One vacuum breaker is included, with no washers or tape listed.

Skip it if you need a self-draining valve for winter shutoff; Boltigen's 3/4-inch model explicitly drains when the faucet closes.

Homewerks is a fit for a single standard garden-hose connection when stated standards compliance is a priority. Its listing does not specify self-draining operation, so consider that boundary for seasonal outdoor use.

Full product details
BrandHomewerks Worldwide
ColorBrass
Included ComponentsVacuum Breaker
Item Dimensions2 x 2 x 2 inches
Item Weight9.07 g
Dimensions2 x 2 x 2 inches
ManufacturerHomewerks
Part Number108-904
Manufacturer Warranty DescriptionLimited Lifetime Warranty
MaterialBrass
Model NumberVACBFPZ4B
Size3/4 Inch.
Thread Size0.75 NPT
Additional InformationImportant Information Bulb Voltage 0 volts

Listed on Amazon as: Homewerks 3/4-Inch Brass Male Hose Thread Vacuum Breaker, ASSE Certified

View on Amazon
Boltigen Self-Draining Breaker

#3 · Lead-Free Option

3. Boltigen Self-Draining Breaker

  • Material: Brass
  • Material Type: Brass
  • Size: 3/4'' GHT Female to 3/4'' GHT Male
  • Thread Size: 0.75 inch

Best for: Winter-conscious faucet replacement.

Why it ranks #3: Its 3/4-inch GHT female-to-male connections and lead-free brass construction suit standard outdoor faucets, with self-draining operation.

Automatic drainage at faucet shutoff is the Boltigen valve’s defining feature, helping release standing water from an outdoor connection in winter. It combines that self-draining action with lead-free brass and 3/4-inch GHT female-to-male threads for a garden faucet or spigot replacement.

The 3/4-inch GHT female-to-male configuration gives buyers a defined hose-thread connection for replacing an outdoor faucet fitting. When the faucet shuts off, the valve allows automatic drainage, a practical feature for reducing water left in the connection during freezing weather. Its lead-free brass specification is presented as a way to reduce pollution and health risks. Together, the thread format, shutoff drainage, and material make this a targeted choice for outdoor hose-bib use.

Skip it if you need several valves in one purchase; SUNROAD's three-pack provides multiple 3/4-inch fittings.

Boltigen suits buyers replacing an outdoor garden-faucet fitting who value lead-free brass and drainage at shutoff. Check that the 3/4-inch GHT female-to-male thread arrangement matches the connection you are replacing.

Full product details
BrandBoltigen
ColorGold
Item Weight0.15 kg
ManufacturerBoltigen
Part NumberAH90-2
MaterialBrass
Model NumberAH90-2
Size3/4'' GHT Female to 3/4'' GHT Male
Thread Size0.75 inch

Listed on Amazon as: No Lead Brass Self-Draining Vacuum Breaker with 3/4'' GHT Feamle to 3/4'' GHT Male Thread Hose Bib Anti Siphon Valve Backflow Preventer Adapter, for Outdoor Garden Faucet Spigot Replacement

View on Amazon
Breezliy Brass Breaker Set

#4 · Certified Two-Pack

4. Breezliy Brass Breaker Set

  • Material: Brass
  • Material Type: Brass
  • Size: 2-Pack Vacuum Breaker Set
  • Thread Size: 3/4 inch

Best for: Two-point hose and RV protection.

Why it ranks #4: The two-pack includes 3/4-inch female-to-male hose-thread valves and is listed as meeting ASSE 1011, CSA B64.2, and ANSI/NSF 61-9.

The Breezliy set pairs two brass vacuum breakers with tape and extra washers, making it useful when preparing more than one hose-bib or RV connection. Its 3/4-inch female inlet and male outlet are stated to work with most standard hoses and end valves.

The paired fittings let you address two connection points, while the supplied gasket and tape provide accessories for installation. Breezliy specifies a 3/4-inch female hose-thread inlet and 3/4-inch male hose-thread outlet, matching most standard hose and end valves, including hose bibs and sillcocks. The product also states that it meets ASSE 1011/CSA B64.2 and ANSI/NSF 61-9 standards, information buyers may value when comparing plumbing fittings.

Pros
  • Two brass vacuum breakers
  • Includes gasket and tape
  • 3/4-inch female inlet and male outlet
  • States compliance with ASSE 1011/CSA B64.2 and ANSI/NSF 61-9
Cons
  • No self-draining mechanism is listed for this set.

Skip it if you want a specified self-draining valve; Boltigen's brass 3/4-inch model explicitly drains when the faucet shuts off.

Pick Breezliy when two standard hose connections need vacuum breakers and supplied tape and washers are useful. Its listing identifies compatible thread sizes and standards, but does not specify self-draining operation.

Full product details
BrandBreezliy
ColorGolden
Included ComponentsVacuum breaker , gasket,tape
Item Dimensions4 x 0.5 x 6.5 inches
Dimensions4 x 0.5 x 6.5 inches
ManufacturerBreezliy
Part Number‎2-Pack Vacuum Breaker
MaterialBrass
Model NumberVacuum breaker
Size2-Pack Vacuum Breaker Set
Thread Size3/4 inch

Listed on Amazon as: 2-Pack Brass Vacuum Breaker Set 3/4" Anti-Siphon Hose Bib Valve for Garden Spigot RV Hose Connection Backflow Preventer Connector with Tape and Extra washers

View on Amazon
LitOrange Brass Breaker

#5 · Pressure Rated

5. LitOrange Brass Breaker

  • Material: Brass
  • Material Type: Brass
  • Size: 2 Pack

Best for: Two-valve kit with pressure limits.

Why it ranks #5: This two-pack supplies washers and tape, has a break-off screw, and lists a maximum operating pressure of 125 psi.

Two brass vacuum breakers plus washers and roughly 350 inches of tape make the LitOrange pack convenient for preparing a pair of hose-bib connections. Its listed 125-psi maximum operating pressure and 180°F maximum temperature provide explicit operating limits for buyers checking system requirements.

Each fitting uses a 3/4-inch female hose-thread inlet and 3/4-inch male outlet, a configuration listed for standard hose and end valves including hose bibs, sillcocks, RVs, and garden spigots. The break-off screw supports permanent attachment, while the included washers and tape provide installation materials for both connections. The stated pressure and temperature ceilings help buyers judge whether the product’s operating range suits their setup before installing it.

Pros
  • Two brass vacuum breakers
  • Includes two washers and about 350 inches of tape
  • Break-off screw for permanent attachment
  • Lists 125-psi and 180°F maximum operating limits
Cons
  • The listing warns that the product can expose users to lead and lead compounds.

Skip it if you require a listed lead-free brass fitting; Boltigen's self-draining valve is specified as lead-free brass.

Consider LitOrange for two standard hose connections when permanent attachment and included tape are useful. Its stated pressure and temperature limits are key selection boundaries, and its listing includes a lead-exposure warning.

Full product details
BrandLitOrange
ColorRed
Item Weight0.13 kg
ManufacturerLitorange
Part NumberA059-2
MaterialBrass
Model NumberA059-2
Size2 Pack
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including lead and lead compounds which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Listed on Amazon as: 2 Pack Brass 3/4" Inch GHT Hose Bibb Backflow Preventer Vacuum Breaker

View on Amazon
Xiny Tool Vacuum Breaker

#6

6. Xiny Tool Vacuum Breaker

  • Material: Brass
  • Material Type: Brass
  • Size: 3/4 inch
  • Thread Size: 0.75 inch

Best for: Brass two-pack for garden spigots.

Why it ranks #6: The two-pack uses solid brass and includes washers; its 3/4-inch size is specified for garden spigot and RV applications.

A two-piece solid-brass set gives Xiny Tool buyers a way to equip both a garden spigot and an RV hose connection. The listed 3/4-inch size and supplied washers keep the package focused on common hose-bib applications rather than a single replacement point.

The product identifies backflow prevention into the drinking-water system and anti-siphoning as its function, supporting use at a faucet connected to garden or RV hoses. Two vacuum breakers and two washers are included, so the set can serve more than one connection without sourcing those washers separately. Its brass construction is described as durable and corrosion-resistant. The listing also says it helps protect against freezing, though it does not specify a self-draining mechanism or a pressure limit.

Pros
  • Two vacuum breakers included
  • Two washers included
  • Brass construction described as corrosion-resistant
  • Listed for garden spigot and RV use
Cons
  • No thread gender, pressure limit, or self-draining mechanism is specified.

Skip it if you need explicit female-to-male thread details; Breezliy lists 3/4-inch female and male hose-thread connections.

Xiny Tool fits buyers seeking two brass vacuum breakers for garden or RV hose connections, with washers supplied. The listing leaves thread gender and operating limits unspecified, so those details may matter for a precise replacement.

Full product details
BrandXiny Tool
ColorBrass
Included ComponentsFaucet Vacuum Breaker
Item Dimensions3 x 4 x 5 inches
Item Weight0.13 kg
Dimensions3 x 4 x 5 inches
ManufacturerXiny Tool
Part NumberFaucet Vacuum Breaker
MaterialBrass
Model NumberFaucet Vacuum Breaker
Size3/4 inch
Thread Size0.75 inch

Listed on Amazon as: 2 Pack Faucet Vacuum Breaker, 3/4 Inch Solid Brass Hose Bib Backflow Preventer for Garden Spigot RV

View on Amazon
SUNROAD Brass Breaker

#7

7. SUNROAD Brass Breaker

  • Material: Brass
  • Material Type: Brass
  • Size: 3/4 inch
  • Thread Size: 3/4 inch

Best for: Multi-spigot household setup.

Why it ranks #7: This three-pack has 3/4-inch threads and includes washers, set screws, and an Allen wrench; its drain hole can release remaining water.

Three brass vacuum breakers are the SUNROAD set’s clearest advantage, letting you outfit several garden spigots or RV hose connections from one pack. Each uses a 3/4-inch thread described as fitting most standard American hoses, and a drain hole releases remaining water when the supply is shut off.

See also  Best Moss Rake For Lawn: Compare 9 Dethatching Rakes

The included washers, extra set screws, and Allen wrench give you installation pieces alongside the three fittings, which is useful when preparing several connection points. The 3/4-inch size is specified for standard American hose connections, supporting use across typical garden or RV hose setups. Its drain hole lets water escape after shutoff; the product notes that remaining water sprays out, so keep clear during that step. Brass construction completes the listed material specification.

Pros
  • Three vacuum breakers in the pack
  • Brass construction
  • 3/4-inch thread stated to fit most standard American hose
  • Includes washers, extra set screws, and Allen wrench
Cons
  • Water sprays from the drain hole at shutoff, so users must keep clear.

Skip it if you need a single fitting with a stated self-draining faucet function; Boltigen's 3/4-inch self-draining valve is a direct option.

This SUNROAD pack suits households or RV users equipping multiple standard hose connections and wanting installation hardware included. Be prepared for water to spray from the drain hole when shutting off the supply.

Full product details
BrandSUNROAD
ColorBrass
Included ComponentsVACUUM BREAKER,WASHERS,SET SCREWS,ALLEN WRENCH
Item Dimensions3.35 x 3.35 x 1.38 inches
Item Weight0.24 kg
Dimensions3.35 x 3.35 x 1.38 inches
ManufacturerSHINTAI
MaterialBrass
Model NumberSHINTAI-F3/4-GB
Size3/4 inch
Thread Size3/4 inch
Additional InformationImportant Information Small parts. Not for children under 3 yrs.

Listed on Amazon as: 3 Pack SUNROAD Lead-Free Brass 3/4" Inch MHT Hose Bibb Connector Backflow Preventer Vacuum Breaker,Check Valve For Garden Spigot RV Hose Connection,Anti-Siphon Fitting with extra set screws

View on Amazon
GBQA Brass Breaker

#8

8. GBQA Brass Breaker

  • Material: Brass
  • Material Type: Brass
  • Size: 3/4 inch
  • Thread Size: 0.75 inch

Best for: Certified two-piece hose set.

Why it ranks #8: The 3/4-inch brass breaker lists a 125 psi maximum pressure and 180°F maximum temperature, plus a break-off screw for permanent attachment.

Two brass vacuum breakers and stated ASSE 1011/CSA B64.2 compliance make the GBQA set a candidate for outfitting more than one garden hose or faucet connection. Its listed operating ceilings of 125 psi and 180°F add concrete limits for checking a setup.

The 3/4-inch size is described as compatible with most standard hoses and faucets, making the two-piece pack useful across common outdoor watering connections. A break-off screw supports permanent attachment, while the included washers provide installation components. The brass body is described as heavy-duty and corrosion-resistant. Listed compliance with ASSE 1011 and CSA B64.2, together with the pressure and temperature limits, gives buyers several concrete specifications to compare against their intended use.

Pros
  • Two brass vacuum breakers
  • Break-off screw for permanent attachment
  • Meets ASSE 1011 and CSA B64.2 standards
  • Lists 125-psi and 180°F maximum operating limits
Cons
  • The listing warns of possible exposure to lead and lead compounds.

Skip it if you need a lead-free brass specification; Boltigen explicitly identifies its 3/4-inch self-draining valve as lead-free.

GBQA suits buyers equipping two standard hose or faucet connections who value stated standards and operating limits. Its listing includes a lead-exposure warning, a relevant consideration when choosing a brass fitting.

Full product details
BrandGBQA
ColorYellow
Included ComponentsWashers
Item Dimensions2 x 2 x 2 inches
Item Weight2.08 ounces
Dimensions2 x 2 x 2 inches
ManufacturerGBQA
Part NumberA059-2
MaterialBrass
Model NumberGVB01
Size3/4 inch
Thread Size0.75 inch
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including lead and lead compounds which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Listed on Amazon as: 3/4" Inch Brass Vacuum Breaker – Backflow Preventer for Garden Hoses, Faucets,and RVs (2)

View on Amazon
Dreyoo Fine-Thread Breaker

#9

9. Dreyoo Fine-Thread Breaker

  • Material: Brass
  • Material Type: Brass
  • Size: 1-1/16"
  • Thread Size: 1-1/16"

Best for: Fine-thread faucet replacement.

Why it ranks #9: It is a brass self-draining replacement for PK1380, but its 1-1/16-inch fine-thread inlet makes compatibility less universal than standard hose-thread models.

A 1-1/16-inch fine-thread inlet sets the Dreyoo valve apart for compatible faucet replacements, while its 3/4-inch male hose-thread outlet connects to a standard hose. The self-draining brass fitting is identified as a replacement for PK1380 and includes washers and sealing tape.

The fine-thread inlet is the key fit detail for replacing a compatible outdoor faucet component; the 3/4-inch male hose-thread outlet then accepts a hose connection. Dreyoo lists self-draining operation and backflow prevention, connecting the replacement use case with drainage after shutoff. Four washers and sealing tape are included to support installation. Its maximum operating limits are 125 psi and 180°F, giving buyers specific conditions to compare with their system.

Pros
  • 1-1/16-inch fine-thread inlet
  • 3/4-inch male hose-thread outlet
  • Self-draining brass construction
  • Includes four washers and sealing tape
Cons
  • Fine-thread inlet limits it to compatible 1-1/16-inch faucet connections.

Skip it if you need a standard 3/4-inch female hose-thread inlet; Homewerks offers a 3/4-inch hose-thread vacuum breaker.

Dreyoo is aimed at replacing a compatible fine-thread faucet breaker, especially when self-draining operation and included washers and tape help. Its 1-1/16-inch inlet is the critical fit boundary before purchase.

Full product details
BrandDreyoo
Included Components1 x Fine Thread self draining vacuum breaker, 1 x Sealing tape, 4 x Washers
Item Dimensions2.6 x 1.77 x 1.38 inches
Item Weight4.64 ounces
Dimensions2.6 x 1.77 x 1.38 inches
ManufacturerDreyoo
Part NumberDR-Dreyoo-1724
MaterialBrass
Model NumberDR-Dreyoo-1724
Outlet Connection Size0.75 inches
Size1-1/16"
Thread Size1-1/16"
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Listed on Amazon as: Dreyoo Self Draining Vacuum Breaker, Replacement for PK1380, Anti Siphon Valve with 4 Washers and 1 Sealing Tape, Hose Bib Backflow Preventer for Garden Outdoor Faucet Spigot(Fine Thread)

View on Amazon
Raindrip R620CT

#10

10. Raindrip R620CT

  • Material: Stainless Steel;Polyvinyl Chloride…
  • Material Type: Stainless Steel;Polyvinyl Chloride…
  • Size: No Size
  • Thread Size: 3/4 inch

Best for: Drip irrigation source connection.

Why it ranks #10: Its 3/4-inch FHT-to-MHT connections suit a hose bib and drip system, but its stated irrigation use is less general than the brass hose-bib options.

A direct 3/4-inch female-to-male connection makes the Raindrip preventer a practical link between a hose bib and drip-irrigation components. Its listed outlet can connect to items such as a timer, pressure regulator, or adapter, helping organize the water-source end of a drip system.

The female hose-thread inlet attaches at a hose bib or faucet, and the male outlet connects to drip-system components, creating a defined sequence from source to irrigation equipment. Raindrip describes the device as preventing impure water from flowing backward into the clean supply and notes its use with potable and sometimes non-potable sources. The listed materials include PVC, ABS, and stainless steel. This application-specific configuration is useful for irrigation setups rather than a general brass hose-bib replacement.

Pros
  • 3/4-inch FHT inlet connects to hose bib or faucet
  • 3/4-inch MHT outlet connects to drip components
  • Listed for timers, pressure regulators, and adapters
  • Specified to prevent reverse flow into the clean-water supply
Cons
  • Plastic construction is listed, not brass.

Skip it if you want a brass hose-bib breaker rather than a drip-system connection; Eastman's brass fitting is a direct hose-thread option.

Raindrip suits gardeners connecting a faucet or hose bib to drip-irrigation equipment such as a timer or pressure regulator. Choose it for that source-to-system layout, not when brass construction is required.

See also  Best Space Saving Small Microwaves Tops 10
Full product details
BrandRaindrip
ColorBlack
Included ComponentsPreventer
Item Dimensions2 x 4 x 5 inches
Item Weight22.68 g
Dimensions2 x 4 x 5 inches
ManufacturerRaindrip
Part Number100050150
Manufacturer Warranty DescriptionRaindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling.
MaterialStainless Steel;Polyvinyl Chloride (PVC);Acrylonitrile Butadiene Styrene (ABS)
Model NumberR620CT
SizeNo Size
Thread Size3/4 inch
Additional InformationImportant information Safety Information safety_warning Directions Not_Applicable

Listed on Amazon as: Raindrip R620CT, Anti-Siphon Backflow Preventer, 3/4-Inch FHT X 3/4-Inch MHT, Connects to Hose Bib and Drip Irrigation System, Blister Package, Plastic, Black

View on Amazon

Avoid the Fine-Thread Compatibility Trap

The most important compatibility trap is confusing Dreyoo’s 1-1/16-inch fine-thread inlet with the standard 3/4-inch hose threads used by most options here. Dreyoo is described as a replacement for PK1380 and has a 3/4-inch male hose-thread outlet, but the inlet is not the same as a conventional 3/4-inch hose-thread inlet. By contrast, Eastman 20199 lists 3/4-inch FHT by 3/4-inch MHT, and Raindrip R620CT lists the same connection format for a hose bib and drip system.

Check the faucet’s actual thread before buying, especially if replacing an existing vacuum breaker. A matching outlet alone does not establish that the inlet will attach to your faucet.

If the existing valve is a replacement-specific model, compare its inlet thread to the listed size rather than relying on a general claim of garden hose compatibility.

What Self-Draining Does—and Does Not—Mean

A self-draining design releases some remaining water when the supply is shut off, but the product descriptions do not establish that it makes an outdoor faucet freeze-proof. Eastman 20199 has a self-draining mechanism, and Boltigen describes automatic draining upon shutoff; SUNROAD also notes a drain hole and warns that water may spray when the supply is turned off. That release can be useful, but it also means water may discharge at the valve during operation.

Treat this feature as a drainage aid, not a substitute for winterizing exposed plumbing or following the faucet manufacturer’s instructions. Products without a stated self-draining feature may still serve the backflow-prevention purpose, but the supplied details do not describe their drainage behavior.

Choose based on the faucet, local winter conditions, and how you plan to shut off and store the hose.

How to Choose a Garden Hose Anti-Siphon Valve

Thread Size and Orientation

Look for a valve with inlet and outlet threads that match both your faucet and hose. Several options use 3/4-inch hose connections: Eastman 20199 lists 3/4-inch FHT by 3/4-inch MHT, while Boltigen lists 3/4-inch GHT female to 3/4-inch GHT male. Dreyoo differs with a 1-1/16-inch fine-thread inlet and 3/4-inch male hose-thread outlet.

Those differences matter even when a listing describes a product as suitable for garden hoses. Standard hose-bib buyers should favor the listed 3/4-inch connections; choose Dreyoo only when your faucet’s fine thread matches its inlet.

Confirm the direction and type of each connection against the valve you are replacing.

Material and Stated Compliance

Check both the stated material and any listed standards rather than treating every brass valve as equivalent. Most of the hose-bib options specify brass, while Raindrip lists a combination of stainless steel, PVC, and ABS. Homewerks is listed as meeting ASSE 1011, CSA B64.2, and ANSI/NSF 61-9; Breezliy lists the same standards, and GBQA states ASSE 1011 and CSA B64.2.

Boltigen specifically describes its brass as lead-free. Buyers who prioritize a listed standards claim can consider Homewerks or Breezliy; those seeking a specifically described lead-free model can consider Boltigen.

Verify that any product and installation meet applicable local requirements, because the supplied product details do not establish local approval.

Pack Contents and Drainage Features

Choose the package and operating features around how many faucets you need to protect and what installation supplies you want included. Eastman 20199 is a single brass fitting with a self-draining mechanism and break-off screw. Breezliy, LitOrange, and Xiny Tool are two-packs; SUNROAD supplies three valves, washers, set screws, and an Allen wrench.

LitOrange also lists tape and a 125 psi maximum operating pressure, while Dreyoo includes four washers and sealing tape for its fine-thread replacement. A single standard faucet favors Eastman’s straightforward fit; several hose bibs may favor a multi-pack.

If drainage at shutoff is important, compare the products that explicitly describe self-draining operation, and expect the valve’s drain opening to release water.

Which Garden Hose Anti-Siphon Valve Should You Choose?

For a typical 3/4-inch hose bib, choose Eastman 20199: its brass construction, self-draining mechanism, and break-off screw make it the strongest all-around match. If a listed standards claim is your priority, Homewerks Vacuum Breaker is a brass 3/4-inch option that meets ASSE 1011, CSA B64.2, and ANSI/NSF 61-For a lead-free brass model, select Boltigen Self-Draining Breaker.

If you need to equip multiple faucets, Breezliy Brass Breaker Set, LitOrange Brass Breaker, Xiny Tool Vacuum Breaker, or SUNROAD Brass Breaker provide two or three units. Choose Raindrip R620CT when connecting a hose bib to a drip-irrigation setup.

Consider Dreyoo Fine-Thread Breaker only when replacing a compatible fine-thread faucet valve; its inlet is not the standard 3/4-inch hose thread.

Frequently Asked Questions

How can I tell whether my outdoor faucet has standard hose threads or fine threads?

Check the faucet or replacement part for thread markings, then compare the thread diameter and spacing with a known compatible fitting. Standard garden-hose connections are commonly labeled GHT or hose thread; fine-thread replacement valves may not fit them. If markings are absent, take the old valve or a clear photo to a hardware or plumbing supplier before buying.

Does a hose bib vacuum breaker need to stay installed when the hose is removed?

It depends on the valve and installation. Some breakers are designed to remain on the faucet; Eastman 20199 has a break-off screw intended for permanent installation. Check the product instructions rather than assuming a breaker should be removed with the hose.

If you remove a removable model, store it where its sealing parts will not be lost.

Can a self-draining valve prevent an outdoor faucet from freezing?

No. A self-draining mechanism can help water drain from the valve, but it does not guarantee that the outdoor faucet or connected plumbing is protected from freezing. Follow the faucet and valve instructions for cold-weather preparation, and disconnect the hose when appropriate.

Do not treat the valve alone as a substitute for winterizing exposed plumbing.

What should I choose for a hose bib connected to drip irrigation?

Choose a valve listed for that connection; Raindrip R620CT is described as connecting a hose bib to a drip-irrigation system, with 3/4-inch female hose thread by 3/4-inch male hose thread. Check that your faucet and irrigation fittings match those connections, and follow the irrigation system’s installation instructions.

When should I choose a fine-thread replacement breaker?

Choose a fine-thread replacement only when replacing a compatible fine-thread faucet valve. Dreyoo’s listed model is identified as fine thread, and its inlet is not the standard 3/4-inch hose thread. Check the existing valve’s thread before ordering; for a typical 3/4-inch hose bib, select a standard hose-thread model instead.

Final Words

For a typical 3/4-inch hose bib, Eastman 20199 is the clearest all-around choice: its brass body, self-draining mechanism, standard hose-thread connections, and permanent-installation break-off screw suit that setup. Choose Homewerks if its listed standards claims matter, or Boltigen for a lead-free brass option. For multiple faucets, consider the listed multi-packs; for drip irrigation or a fine-thread replacement, match the specialized model to the connection first.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *