Best Brush Hog For Skid Loader: Compare 8 Attachments

#1 · Best Overall

1. ATS Power 72-Inch Brush Cutter

• Weight: 776 lb

Best for: Lower-flow 66-inch clearing.

Why it ranks #1: Its 72-inch deck, 66-inch cutting width, 3-inch material capacity, stump jumper, and 14–20 GPM requirement make it a versatile clearing option.

A listed 14–20 GPM hydraulic requirement makes this ATS POWER cutter a lower-flow option among the wide-deck attachments in this roundup. Its 72-inch deck delivers a 66-inch cutting width, and the two bi-directional blades with a 25HP gearbox are specified to cut material up to 3 inches.

The 66-inch cutting width across a 72-inch deck supports broad coverage for pasture maintenance, brush removal, and land clearing. Two bi-directional blades and a 25HP gearbox provide the listed cutting setup for material up to 3 inches, while the stump jumper is intended to navigate uneven terrain, roots, and stumps. Its stated 14–20 GPM requirement can suit loaders with less available flow than the LandHonor 66-inch cutter’s stated requirement, though hydraulic fit still matters.

Skip it if you need capacity for larger trees; the Titan Attachments 60-inch rotary cutter lists cutting material up to 7 inches.

A good match for operators seeking a wide swath, stump-jumper design, and a 14–20 GPM requirement for pasture or brush work. Its listed 3-inch cutting limit makes it a less suitable choice for larger woody material.

Listed on Amazon as: 72" Wide Skid Steer Brush Cutter Attachment – 66" Cutting Width, 3" Dia Material Cut, 2 Bi-Directional Blades, 25HP Gear Box, Stump Jumper

#2 · Highest Capacity

2. Titan Attachments 60-Inch Rotary Cutter

• Weight: 1430 lb
• Material: Steel, Steel Alloys

Best for: Heavy brush and small-tree cutting.

Why it ranks #2: Three replaceable, reversible AR500 blades are listed for material up to 7 inches, with an 18–25 GPM mid-flow requirement.

A stated capacity for material up to 7 inches sets the Titan Attachments 60-inch rotary cutter apart for dense brush and small-tree clearing. Three reversible, replaceable AR500 steel blades handle the cutting, while mulching teeth help break cut material into smaller pieces during vegetation work.

The three AR500 blades are both reversible and replaceable, giving operators a maintenance path for the cutting edges rather than a fixed blade setup. Mulching teeth help break down cut material as the attachment clears brush, vines, and trees up to the stated 7-inch capacity. The standard SSQA mount and 18–25 GPM mid-flow requirement define loader compatibility, while the open-faced push bar has a protective plate to help shield the cutter from debris.

Skip it if you have a lower-flow loader; the ATS POWER BC-13-72W lists a 14–20 GPM requirement for its 66-inch cutting width.

A strong fit for operators tackling dense vegetation and trees up to the listed 7-inch capacity, with mulching teeth to break down cut material. Confirm SSQA mounting and 18–25 GPM mid-flow availability before selecting it.

Listed on Amazon as: Titan Attachments 60" USA Made Rotary Brush Cutter for Skid Steers

#3 · Heavy-Duty Deck

3. LandHonor 66-Inch Brush Cutter

• Weight: 1150 lb
• Material: Stainless Steel
• Dimensions: 76 x 72 x 22 in

Best for: Severe-duty clearing crews.

Why it ranks #3: Its 0.25-inch steel deck and 1,150-pound weight are suited to demanding clearing, and the listing states it handles saplings up to 3 inches.

A 0.25-inch steel deck paired with a 1,150-pound overall weight gives this LandHonor cutter a substantial frame for demanding vegetation work. Its listed cutting capacity reaches brush and saplings up to 3 inches in diameter, making it relevant when ordinary mowing equipment is not enough for the clearing task.

The 66-inch size gives the attachment a broad working footprint, while the heavy steel deck and substantial overall weight speak to a rugged setup for harsh clearing conditions. The supplied description says it handles dense brush and saplings up to 3 inches, so buyers can assess it for heavier vegetation rather than routine grass alone. LandHonor says it fits medium- to large-size skid loaders made in the last 30 years; the 1,150-pound weight is an important loader-capacity consideration.

Skip it if you need a lighter listed attachment; the ATS POWER BC-13-72W weighs 776 pounds and lists a 3-inch cutting capacity.

A fit for operators clearing dense brush and saplings with a medium- or large-size skid loader. Its 66-inch format and heavy construction suit demanding work, but account for the 1,150-pound attachment weight and loader capacity before choosing it.

Listed on Amazon as: 66" Skid Steer Brush Cutter Brush Hog Mower

#4

4. Wolfequip 66-Inch Brush Cutter

• Weight: 1105 lb
• Material: Stainless Steel
• Dimensions: 76"D x 72"W x 22"H

Best for: Heavy-deck farm clearing.

Why it ranks #4: This 1,105-pound cutter has a 0.25-inch steel deck and a stated hydraulic requirement of 16–22 GPM at 3,000 PSI.

A 0.25-inch steel deck and 66-inch cutting width give this Wolfequip brush cutter a substantial footprint for demanding farm and landscaping jobs. Its listed 16–22 GPM flow range and 3-blade configuration help define the setup: a wide-cut attachment for compatible skid steers, not a universal fit regardless of hydraulics.

The 66-inch cutting width can cover large areas with fewer passes, while the 0.25-inch steel deck and 8-inch deck height provide the stated heavy-duty construction for land clearing. The attachment lists a 16–22 GPM requirement at 3,000 PSI, so buyers can compare it directly with their loader’s hydraulic output before installation. Its 1,105-pound weight is another practical compatibility factor, especially for operators balancing attachment mass against machine capacity.

Skip it if you need a lighter attachment; the ATS POWER BC-13-72W is listed at 776 pounds and cuts a 66-inch swath.

This suits farm and landscaping operators clearing sizable areas with a loader that matches its 16–22 GPM at 3,000 PSI requirement. The broad cut and heavy deck are useful, but the 1,105-pound weight needs careful loader-capacity consideration.

Listed on Amazon as: Lawn Mower 66" Brush Hog Brush Cutter Skid Steer Attachments with 3 Blades, Open Front Deck, for Farm Landscaping Gardin, fit for Bobcat for Cat for John Deere, US Stock

#5

5. Generic 72-Inch Brush Cutter

• Weight: 1000 lb
• Dimensions: 78"D x 72"W x 20"H

Best for: Wide-swathe pasture clearing.

Why it ranks #5: Its 72-inch deck, two bi-directional blades, stump jumper, and stated 16–20 GPM flow requirement suit substantial brush-clearing jobs.

A 72-inch deck produces a listed 66-inch cutting swath, letting this two-blade cutter cover broad ground per pass. Its 25-horsepower gearbox and stated ability to cut material up to 3 inches make it a candidate for pasture maintenance and brush removal, provided the skid steer supplies the specified hydraulic flow.

The two bi-directional blades work with a 25HP gearbox to cut material up to 3 inches, while the 66-inch swath can reduce passes across open areas. The stump jumper is listed to help the attachment navigate uneven terrain, roots, and stumps. It requires 16–20 GPM according to the product overview, a key hydraulic compatibility check. At about 1,000 pounds, its weight also matters when matching the attachment to the loader.

Skip it if you need a lower-flow setup; the ATS POWER BC-13-72W lists a 14–20 GPM requirement and the same 66-inch cutting width.

A practical candidate for pasture and land clearing where a broad cut and 3-inch material capacity matter. Check that the loader meets the 16–20 GPM requirement and can handle an attachment listed at roughly 1,000 pounds.

Listed on Amazon as: 72" Heavy Skid Steer Brush Cutter Attachments Circular Holder with 2 Blades Lawn Mower, Open Front Deck Specs, 16-22 GPM, Replaceable Steel Blades, US Stock

#6

See also  Best Beer Mugs: Top 10 Picks to Keep Beer Cold!

6. ATTACHMAN 72-Inch Brush Cutter

• Weight: 968 lb
• Material: Alloy Steel
• Dimensions: 72"D x 24"W x 74"H

Best for: Roadside and pasture maintenance.

Why it ranks #6: The 72-inch attachment weighs 968 pounds and lists a 64-inch working width; a rear safety chain limits deck lift height.

A 64-inch working width gives this ATTACHMAN cutter a broad clearing path for roadside upkeep, pasture maintenance, and overgrown vegetation. Its 0.2-inch steel deck and hydraulic-powered operation identify it as a substantial skid-steer attachment for property and field cleanup, with a rear safety chain that limits deck lift height.

The 64-inch working width can help cover open ground efficiently across farms, ranches, construction sites, and large properties, all listed use cases. Its 0.2-inch steel deck provides the stated heavy-duty construction, while hydraulic power connects operation to the skid steer. The rear safety chain limits deck lift height, a relevant operating boundary when positioning the cutter. At 968 pounds, the attachment also calls for attention to the loader’s handling capacity.

Skip it if you need a listed cutting diameter or hydraulic-flow range; the ATS POWER BC-13-72W specifies both, including a 3-inch cut limit.

Consider it for roadside vegetation, pasture, and field cleanup when a 64-inch working width suits the job. Its 968-pound weight and safety chain’s limit on deck lift height are relevant loader and operating constraints.

Listed on Amazon as: 72" Skid Steer Brush Cutter Hydraulic Mower Attachment Heavy-Duty

#7 · Mini Loader Pick

7. AGT Industrial M-RC

• Weight: 196 lb
• Material: Iron
• Dimensions: 46.46"D x 43.31"W x 17.72"H

Best for: Mini skid steer brush work.

Why it ranks #7: This mini skid steer cutter weighs 196 pounds, uses 60Si2Mn alloy steel blades, and lists a required flow of 20–40 liters per minute.

An integrated debris guard is a practical feature on this AGT Industrial M-RC mini-skid-steer cutter, minimizing flying particles according to its listing. Its 60Si2Mn alloy steel blades are specified for grass, weeds, brush, and small trees, with a 20–40 liters-per-minute flow requirement defining the hydraulic fit.

The alloy-steel blades provide the listed cutting setup for grass, weeds, brush, and small trees, while the integrated debris guard is intended to minimize flying particles around the operator. Its compact dimensions—46.46 by 43.31 by 17.72 inches—are specified alongside a 196-pound weight, useful details when planning handling and storage around a mini skid steer. The required 20–40 liters per minute remains an essential hydraulic compatibility check before operation.

Skip it if you need a stated mowing-height range; the JaoRop M-RC lists a 25–100 mm mowing-height range and the same 20–40 liters-per-minute requirement.

A suitable option for mini-skid-steer operators cutting grass, weeds, brush, and small trees who value an integrated debris guard. Verify the loader can supply 20–40 liters per minute before selecting this attachment.

Listed on Amazon as: M-RC Brush Cutter Attachment for Mini Skid Steer

#8

8. JaoRop M-RC 42-Inch Cutter

• Weight: 195.6 lb

Best for: Compact-loader mowing.

Why it ranks #8: Its 42-inch working width and 195.6-pound weight identify it as a compact mini skid steer option rather than a full-size brush hog.

A 42-inch working width gives this JaoRop M-RC cutter a compact scale for mini skid steers. Its two 60Si2Mn steel blades and listed 25–100 mm mowing-height range support grass and brush cutting, while the specified 20–40 liters-per-minute flow requirement sets a clear hydraulic compatibility boundary.

The 42-inch working width is suited to a narrower cutting path than the 66-inch and 64-inch attachments in this roundup, a practical consideration for compact-loader jobs. Two 60Si2Mn steel blades handle the cutting, and the stated 25–100 mm mowing-height range gives buyers a defined operating range. Check the required 20–40 liters per minute against the mini skid steer’s hydraulic output; the listing does not state a cutting diameter for woody material.

Skip it if you need a wider cutting path; the ATTACHMAN 72-inch cutter lists a 64-inch working width for larger areas.

This suits mini-skid-steer owners mowing grass and brush where a 42-inch working width fits the job. Check the 20–40 liters-per-minute requirement, and note that the supplied listing gives no cutting-diameter figure for woody material.

Listed on Amazon as: M-RC 42" Mini Skid Steer Brush Cutter Attachment Fit for AGT