Best Side Boom Mower For Skid Steer: 10 Attachments Compared

#1 · Best Overall

1. Wolfequip Articulating Brush Cutter

• Weight: 1084 lb
• Dimensions: 86"D x 58"W x 53"H
• Material: Metal

Best for: Extended-reach bank and fence work.

Why it ranks #1: The listing specifically describes side pruning and articulating cutting, with up to 93 inches of horizontal reach for banks, fence lines, and pond edges.

Up to 93 inches of horizontal reach lets this Wolfequip side-pruning brush cutter work along banks, fence lines, pond edges, and trails from the skid steer. Its listed vertical reach exceeds 16 feet, helping operators address vegetation in elevated or hard-to-reach areas, depending on the machine.

The 42-inch cutter is specified for demanding vegetation work on banks, right-of-ways, pond edges, and new trails. Its horizontal reach is listed as up to 93 inches, while vertical reach exceeds 16 feet; both depend on the carrier machine, so the extended working envelope is not guaranteed for every setup. The title includes a four-way controller and three hydraulic hoses, and the product is listed at 1,084 pounds, considerations for controls, hydraulic hookup, and carrier capacity.

Skip it if you need a compact attachment for close-in mowing; the 25-inch Titan Attachments mini flail has a smaller stated working width.

Choose this for farm, ranch, or landscaping crews that need to cut banks, fence lines, pond edges, or trails from a skid steer. Reach depends on the machine, and its 1,084-pound weight should factor into carrier selection.

Listed on Amazon as: 42" Brush Cutter Side Pruning for Skid Steer Loaders with 4-Way Controller, 3 Hydraulic Hoses for Gardin, Farm and Ranch, Landscaping, fit for Bobcat for Cat for Kubota

#2 · Best Sickle Bar

2. Wolverine Sickle Bar Mower

• Weight: 430 lb

Best for: Light brush and grass cutting.

Why it ranks #2: Its 72-inch sickle bar is described as reaching hard-to-access areas and cutting brush, grass, and light woody material, though side reach is not quantified.

A 72-inch sickle bar gives the Wolverine a long cutting span for brush, grass, and light woody material in hard-to-reach areas. Its flexible cutting head is described as delivering controlled cuts, while the listed cutting capacity of 0.8 inch sets a clear limit for vegetation size.

The sickle-bar format and long reach are described as useful for controlled cutting in areas that are difficult to access. Covermore identifies brush, grass, and light woody material as its intended vegetation, and lists a 0.8-inch cutting capacity; that figure is the practical boundary for choosing work. The attachment weighs 430 pounds and is identified as a quick-attach skid-steer implement. Those specifications help buyers assess handling and mounting, while the cutting-capacity figure helps distinguish light vegetation work from larger material.

Skip it if you need to cut saplings up to three inches; the LandHonor LHR-OBC-12-66W lists that capacity.

Consider this for skid-steer operators trimming grass, brush, and light woody growth where a long sickle bar can reach difficult areas. The 0.8-inch capacity is the key boundary; it is not specified for larger-diameter material.

Listed on Amazon as: 72" Wolverine Sickle Bar Mower Skid Steer Attachment Quick Attach New

#3 · Best Compact

3. Titan Mini Skid Steer Flail Mower

• Weight: 380 lb

Best for: Mini-loader orchard and edge work.

Why it ranks #3: The 25-inch manual side shift offers lateral positioning for edges and tight spots, and the quick tach is intended for mini skid steers.

A 25-inch manual side shift lets this Titan flail mower move left or right to reach tight spots, edges, and awkward areas. Its vertical cutting action mulches from a compact mini-skid-steer platform, with the manufacturer citing a finer finish, less debris, and reduced risk of thrown material.

The forged Y-blades attach to a roller bar and are specified for cutting weeds, brush, and lawn overgrowth, while the vertical action is intended to leave a finer finish with less debris. Manual side shift lets the operator reposition the 25-inch mower for edges and hard-to-reach areas. A Mini Skid Steer Quick Tach connection fits most Toro-style mounts, with Toro Dingo, Ditch Witch, and Vermeer named among compatible machines; the attachment weighs 380 pounds.

Skip it if you need a wide deck for large-area mowing; the 66-inch LandHonor LHR-OBC-12-66W has a broader stated cutting width.

Mini skid-steer owners maintaining orchards, vineyards, fields, or farmland should consider this compact flail for edges and brush. Its 25-inch width favors access over coverage, and the mount is specified for Mini Skid Steer Quick Tach systems.

Listed on Amazon as: Titan Attachments Mini Skid Steer Hydraulic Flail Mower, 25" Manual Side Shift, Mulches up to 3" Material, Bolt-On Y-Knife Blades, Fits Toro Dingo, Ditch Witch & Vermeer

#4

4. ATS Power Mini Brush Cutter

• Weight: 289 lb

Best for: Compact 42-inch mower work.

Why it ranks #4: This compact 42-inch cutter is specifically made for mini skid steers, but its listing does not describe an offset or extended-reach boom.

A 42-inch working width gives this ATS POWER mini skid-steer mower a compact footprint for mowing tasks where a full-size deck is unnecessary. Its two blades and stated 25–100 mm mowing-height range provide a defined cutting setup, while the universal quick-connect coupling addresses attachment mounting.

The 42-inch working width offers a narrower mowing path than the wide-deck cutters in this roundup, which can suit smaller work areas. Two blades handle the cutting, and the listed 25–100 mm mowing-height range provides adjustment across a range of cut heights. ATS POWER specifies an auxiliary hydraulic flow range of 5–10 GPM and product weight of 289 pounds, useful figures when assessing carrier flow and attachment load. The title identifies a universal quick-connect coupling for mini skid steers.

Skip it if you need broad-area coverage in fewer passes; the 72-inch ATTACHMAN S-BC1830(72IN)-MP1220 lists a 64-inch working width.

Mini skid-steer owners with smaller mowing areas may value the 42-inch width, two blades, and adjustable listed cutting height. Its stated 5–10 GPM auxiliary flow range and universal quick-connect coupling are important carrier and mounting considerations.

Listed on Amazon as: Mini Skid Steer Brush Cutter/lawn mower universal quick-connect coupling

#5 · Wide Deck

5. ATTACHMAN 72-Inch Brush Cutter

• Weight: 968 lb
• Dimensions: 72"D x 24"W x 74"H
• Material: Alloy Steel

Best for: Roadside and pasture vegetation control.

Why it ranks #5: Its 64-inch working width and 72-inch deck suit broad vegetation clearing, although the listing does not identify side-boom reach.

A 64-inch working width lets this ATTACHMAN cutter clear vegetation across pasture, roadside, and field work in broad passes. Its 72-inch brush-cutter format pairs that width with a 0.2-inch steel deck, while a rear safety chain limits deck lift height for safer operation.

The listed 64-inch working width supports efficient clearing across pastures, fields, roadsides, and overgrown properties. ATTACHMAN specifies a 0.2-inch steel deck and an alloy-steel construction, with a listed attachment weight of 968 pounds. The rear safety chain limits deck lift height, a practical operating boundary when raising the attachment. Together, the cutting width, weight, and lift restriction help buyers assess coverage, carrier capacity, and how the implement can be positioned during work.

Skip it if you need a specified three-inch cutting capacity; the LandHonor LHR-OBC-12-66W lists one for saplings and brush.

Farm, ranch, construction, and property operators needing broad vegetation coverage may find this cutter relevant for pastures, fields, and roadsides. Its 968-pound weight and safety-chain limit on deck lift height are important operating considerations.

Listed on Amazon as: 72" Skid Steer Brush Cutter Hydraulic Mower Attachment Heavy-Duty

#6 · Heavy-Duty Cutter

6. LandHonor 66-Inch Brush Cutter

• Weight: 1150 lb
• Dimensions: 76 x 72 x 22 in
• Material: Stainless Steel

Best for: Heavy-duty brush and sapling clearing.

Why it ranks #6: The 1,150-pound cutter is listed for brush and saplings up to 3 inches, prioritizing heavy clearing over side-boom access.

A 66-inch cutting width and stated capacity for saplings up to three inches make this LandHonor brush cutter suited to dense vegetation clearing. Its 0.25-inch steel deck and 1,150-pound weight emphasize a heavy-duty setup, while the specified hydraulic operating conditions help define carrier requirements.

The cutter is specified for thick grass, dense weeds, brush, and saplings up to three inches in diameter, with a 66-inch size for land-clearing work. Its 0.25-inch steel deck is presented for demanding conditions, and the listed weight is 1,150 pounds, making attachment load relevant when selecting a skid loader. LandHonor specifies recommended hydraulic flow of 16–22 GPM at 3,000 PSI. Those requirements and the carrier’s lifting capacity should guide fit decisions before operating.

Skip it if you need a lighter listed attachment for mowing; the 430-pound Covermore CM-500 sickle bar is substantially lighter.

This suits operators clearing dense weeds, brush, and saplings on a skid loader that can accommodate its 1,150-pound weight and stated hydraulic requirements. The three-inch cutting capacity is a useful boundary for planning vegetation work.

Listed on Amazon as: 66" Skid Steer Brush Cutter Brush Hog Mower

#7

7. GIYI JS-180 Flail Mower

• Weight: 445 lb
• Dimensions: 29"D x 60"W x 18"H
• Material: Alloy Steel

See also  BEST Black Slate Cutting Boards: Top 10 Picks 2026

Best for: Flail mowing orchards and roadsides.

Why it ranks #7: Its 68.89-inch working width and 28 flail hammers handle grass, weeds, reeds, and small branches, but no side reach is listed.

A 68.89-inch working width and 28 forged flail hammers let this GIYI mower mulch thick grass, weeds, reeds, and small branches in one pass. The stated quick-attach interface supports skid-steer setup, while the protective front baffle is specified to block splashing grass debris.

The 68.89-inch working width can cover a broad strip during pasture, orchard, or roadside maintenance, and the 28 forged hammers are specified for finely mulching grass, weeds, reeds, and small branches in one pass. A standard skid-steer quick-mount interface is intended to simplify attachment setup. The protective front baffle blocks grass debris from splashing, a relevant feature when working around vegetation. Its listed weight is 445 pounds, which helps frame carrier-load considerations for this flail mower.

Skip it if you need a stated three-inch sapling capacity; the LandHonor LHR-OBC-12-66W lists one for brush clearing.

Skid-steer operators maintaining orchards, pasture, or roadside vegetation can consider this flail for broad passes through grass, weeds, reeds, and small branches. Its listed scope does not specify a larger-diameter cutting capacity.

Listed on Amazon as: JS-180 Skid Steer Flail Mower, 68.89" Working Width Hydraulic Flail Mower Attachment with 28 Hammers, Heavy Duty Brush Mulcher for Land Clearing, Orchard, Pasture & Roadside Vegetation

#8

8. ATS Power 72-Inch Brush Cutter

• Weight: 1000 lb
• Dimensions: 78"D x 72"W x 20"H

Best for: Wide-deck pasture clearing.

Why it ranks #8: This rotary attachment has a 66-inch cutting width and requires 16–20 GPM, but its broad deck does not provide listed side-boom reach.

A 66-inch cutting swath from a 72-inch deck lets this rotary cutter clear broad areas in fewer passes. Its two bi-directional blades, 25 HP gearbox, and stated capacity for material up to three inches target heavy-duty land clearing, pasture maintenance, and brush removal.

The 72-inch deck provides a listed 66-inch finish-cut swath, which can reduce pass count when clearing open ground. Two bi-directional blades and a 25 HP gearbox are specified for cutting material up to three inches in diameter. A stump jumper is intended to help the deck pass over uneven terrain, roots, and stumps. The supplied overview lists required hydraulic flow at 16–20 GPM, so machine flow is a key fit consideration; listed weight is about 1,000 pounds.

Skip it if you need a narrower attachment for confined mowing; the 42-inch ATS POWER M-RC42.00 has a smaller stated working width.

This rotary cutter suits skid-steer operators clearing pasture, brush, or other broad areas where a 66-inch swath is useful. Check carrier hydraulic flow against the stated 16–20 GPM requirement and account for its roughly 1,000-pound listed weight.

Listed on Amazon as: 72" Heavy Skid Steer Brush Cutter Attachments Circular Holder with 2 Blades Lawn Mower, Open Front Deck Specs, 16-22 GPM, Replaceable Steel Blades, US Stock

#9

9. MIVA 60-Inch Forestry Mulcher

• Weight: 1355 lb
• Dimensions: 76 x 42 x 35 in
• Material: Alloy

Best for: 60-inch forestry mulching.

Why it ranks #9: The 1,355-pound drum mulcher is intended for land clearing and brush cutting, but its listing gives no offset or side-pruning reach.

A 60-inch working format gives this MIVA drum mulcher a broad path for land clearing, brush cutting, and vegetation management. Its 43 cutting teeth are specified for thick brush, dense vegetation, heavy weeds, and small saplings, with compatibility information citing major-brand skid steers over 800 kg.

The 60-inch format and 43 cutting teeth target clearing and vegetation management across forestry, roadside, and pipeline work. MIVA states that the mulcher can handle thick brush, dense vegetation, heavy weeds, and small saplings, making it relevant beyond routine grass cutting. The listed weight is 1,355 pounds, so carrier capacity matters. Supplied compatibility information specifies most skid-steer loaders over 800 kg from major brands such as Bobcat; that threshold and the attachment’s weight are useful starting points for machine selection.

Skip it if you want a narrower 42-inch mower for compact mowing areas; the ATS POWER M-RC42.00 has a 42-inch working width.

Choose this for forestry, roadside, pipeline, or land-clearing work where a 60-inch drum mulcher and 43 teeth suit the vegetation. Its 1,355-pound weight and stated over-800-kg compatibility threshold should guide carrier selection.

Listed on Amazon as: MIVA 60'' Drum Forestry Mulcher Attachments for Heavy Duty Skid Steer Loader, Hydraulic Mower Attachment with 43 cutting teeth, Brush Cutter for Land Clearing, Bush Clearing, Handling Wood

#10

10. MIVA 72-Inch Forestry Mulcher

• Weight: 2491 lb
• Dimensions: 89 x 46 x 49 in
• Material: Aolly Steel

Best for: Heavy forestry mulching work.

Why it ranks #10: This 2,491-pound drum mulcher targets heavy vegetation clearing rather than side-boom mowing, making it the least direct match.

Fifty cutting teeth and hydraulic pressure up to 4,351 PSI equip this MIVA drum mulcher for shredding weeds, brush, shrubs, and small trees. Its stated focus on rocky, muddy, and sloped terrain targets land-clearing work where a conventional mowing pass may not address dense vegetation.

The 50 heavy-duty cutting teeth are specified to shred brush, shrubs, weeds, and small trees, supporting vegetation removal and reclamation work. MIVA also cites hydraulic pressure up to 4,351 PSI and operation on rocky, muddy, and sloped terrain. At 2,491 pounds, the attachment is a substantial load for a carrier, and the supplied compatibility information says the 60-inch forestry mulcher suits most skid steers over 800 kg from major brands. Confirming the exact model and size is essential because the title identifies a 72-inch unit.

Skip it if you need a lighter listed forestry mulcher; the MIVA 60FM is listed at 1,355 pounds.

This is aimed at heavy land-clearing and reclamation crews handling dense brush, shrubs, or small trees on challenging terrain. Its 2,491-pound weight and the supplied 60-inch compatibility wording alongside a 72-inch title warrant careful carrier and configuration checks.

Listed on Amazon as: 72'' Drum Forestry Mulcher Attachments for Heavy Duty Skid Steer Loader, Hydraulic Mower Attachment with 50 cutting teeth, Brush Cutter for Land Clearing, Bush Clearing, Handling Wood Red