Best Stop Cable For Lawn Mower: Compare 10 Replacements

#1 · Best Overall

1. YGQ 1101366MA Cable

• Dimensions: 58.27 x 1.4 x 1.1 in
• Weight: 2.46 oz

Best for: Briggs and Murray replacement.

Why it ranks #1: This is explicitly an engine stop cable replacing 1101366 and 1101366MA, with stated fit for most Briggs & Stratton and Murray 22-inch walk-behind mowers.

A 52-inch conduit and 58-inch inner wire give this YGQ stop cable defined dimensions for replacement planning. It is listed for most Briggs & Stratton and Murray 22-inch walk-behind mowers, while its Z-bend ends and steel-wire construction support a direct cable-replacement use case.

The stated 52-inch conduit and 58-inch inner wire help compare the cable with the original before installation, and the Z-bend on each end identifies its termination style. YGQ also specifies high-strength thickened steel wire, durable rubber, and a rust-proof, waterproof Z-bend material, features intended to withstand mower use. Its listed compatibility centers on most Briggs & Stratton and Murray 22-inch walk-behind mowers, so buyers with other mower sizes or brands should not assume a match.

Skip it if you have a Craftsman, Husqvarna, or Poulan model; the Dopend 158152 cable lists those mower families and specific Craftsman models.

This suits owners replacing a stop cable on a compatible Briggs & Stratton or Murray 22-inch walk-behind mower who can compare cable dimensions. Its listed fit is not universal, so match the original routing and ends.

Listed on Amazon as: 1101366MA Mower Engine Stop Cable Replacement 1101366 S-Cable

#2 · Best Measured Match

2. Diskary 1101366MA Cable

• Dimensions: 59 x 52 x 1.37 in
• Weight: 4.8 oz

Best for: Murray 22-inch cable match.

Why it ranks #2: It replaces 1101366 and 1101366MA and specifies a 52-inch conduit, 59-1/4-inch inner wire, and Z-bends at both ends.

A 52-inch conduit and 59-1/4-inch inner wire define the Diskary 1101366MA cable for owners comparing a Murray stop cable by size. The listing also names Oregon 60-031-0 and Murray 10693 compatibility, with Z bends at both ends.

The specified conduit and inner-wire measurements give owners concrete dimensions to compare against the original, and Z bends on both ends identify the cable-end arrangement. Diskary lists compatibility with Murray 1101366 and 1101366MA, Oregon 60-031-0, and most Briggs & Stratton and Murray 22-inch walk-behind mowers. The listed 2005 Murray and Scotts 22-inch examples offer additional model checks, while the listing cautions that dimensions are manually measured and may deviate.

Skip it if you need a stated 45-inch conduit and a T-shaped end for a 2001–2002 Murray walk-behind; AOTWD 1101181MA lists that setup.

This is aimed at owners checking a Murray or Briggs & Stratton 22-inch walk-behind against the stated 1101366 cable dimensions. Compare the original carefully, since the seller notes that manual measurement can produce deviations.

Listed on Amazon as: Diskary 1101366 1101366MA Replacement Engine Stop Cable 52" Conduit, 59-1/4" Inner Wire, Compatible with Oregon 60-031-0 Murray 10693 Briggs and Stratton Lawn Mower Stop Cable

#3 · Best T-End Option

See also  Best Dorm Refrigerators: Top 10 Picks Powering College Life

3. AOTWD 1101181MA Cable

• Weight: 4.6 oz

Best for: Murray 2001–2002 walk-behinds.

Why it ranks #3: This engine stop cable replaces 1101181 and 1101181MA, lists a 45-inch conduit, and specifies Z-bend and T-shaped ends.

A T-shaped end paired with a Z-bend makes the AOTWD 1101181MA cable distinct from cables specified with matching Z-bends. It is listed for 20- and 22-inch walk-behind mowers from 2001 through 2002, giving owners a specific age and deck-size fitment to check.

The 52.3-inch cable and 45-inch conduit provide measurements for comparing the original route, while the T-shaped end and opposite Z-bend help identify whether the cable connections match. AOTWD lists replacement numbers 1101181 and 1101181MA and specifies 20- and 22-inch walk-behind mowers from 2001 through 2002. Its plated metal inner cable and PVC conduit housing are described as corrosion-resistant, durable, and flexible, useful qualities for a cable exposed to pulls and twists.

Skip it if you need a cable with Z-bend ends on both sides; Swess 946-0957 lists that configuration and a 50-inch cable.

This fits the owner checking a 2001–2002 Murray walk-behind with a 20- or 22-inch deck and matching T/Z connections. The year range and unusual end combination make those details important before installation.

Listed on Amazon as: AOTWD 1101181MA Engine Stop Cable Fits Murray Lawn Mower

#4 · Broad Brand Fit

4. Dopend 158152 Cable

• Dimensions: 10 x 6.9 x 0.7 in
• Weight: 3.87 oz

Best for: Craftsman and Poulan fitments.

Why it ranks #4: It replaces 158152 and 582991501, has Z-bends at both ends, and lists applications for Craftsman, Poulan Pro, and Murray mowers.

A published list of Craftsman throttle-cable model numbers makes the Dopend 158152 zone control cable useful for owners checking a specific mower. It also names Poulan Pro, Craftsman, and Murray applications, with Z-bend ends and a 48-inch conduit for replacement planning.

The 48-inch conduit and approximately 55-inch cable length provide concrete measurements to compare with the removed part, while Z bends at both ends clarify the connection style. Replacing OEM numbers 158152 and 582991501 gives another way to identify the needed cable. The listed Craftsman models and Poulan 961140003 application narrow the fit check; buyers should rely on those listed matches rather than treating the multi-brand title as universal compatibility.

Skip it if you need the listed 53-inch cable dimensions for a broad set of mower brands; Marsrut 290699/183281 gives those measurements and fitments.

Choose this for a Craftsman or Poulan Pro owner whose mower appears in the stated applications and whose original cable matches the listed dimensions. The conflicting cable-length figures make direct measurement especially important.

Listed on Amazon as: 158152 Engine Zone Control Cable for Craftsman, Husqvarna, Murray, Poulan Pro Lawn Mower Parts, Replaces 158152, 582991501 Cable

#5

5. Wanotine 440934 Cable

• Dimensions: 10 x 7 x 0.6 in
• Weight: 4.6 oz

Best for: Multi-brand walk-behind fitments.

Why it ranks #5: The 440934 replacement lists compatibility across Murray, Poulan, Husqvarna, Craftsman, and AYP walk-behind mowers, with numerous named mower applications.

A lengthy model list spanning Murray, Husqvarna, Poulan, Craftsman, AYP, and Weed Eater makes the Wanotine 440934 a model-check-focused replacement. Its 440934 and 532440934 identifiers offer useful part-number checks for owners maintaining a walk-behind mower.

The replacement identifiers 440934 and 532440934 provide two ways to cross-check the original cable, and the listed brand and model applications help narrow compatibility beyond a generic walk-behind description. Murray 20-, 21-, and 22-inch push mowers are specifically named, alongside Husqvarna models such as 5521CM and 6021P and several Poulan models. That breadth can simplify searching across older equipment, but a listed model match remains more useful than assuming every mower from those brands fits.

Skip it if you need published cable and conduit dimensions before comparing a replacement; Marsrut 290699/183281 states both lengths.

This suits owners who can identify their mower by one of the listed models or replacement numbers, especially across the named walk-behind brands. Since dimensions are not supplied here, verify the original cable’s routing and ends separately.

Listed on Amazon as: 532440934 Zone Control Cable 440934 for Murray, Poulan, Husqvarna, Craftsman, AYP Walk-Behind Lawn Mower, Replaces 440934 Control Cable

#6

6. Swess 946-0957 Cable

• Weight: 2.89 oz

Best for: MTD 946-0957 replacement.

Why it ranks #6: It replaces MTD 946-0957 and 746-0957 and specifies a 50- to 50-1/4-inch cable, 37- to 37-1/4-inch conduit, and two Z-bend ends.

Both ends of the Swess 946-0957 cable use Z bends, making its connection style clear for owners replacing the matching MTD control cable. Its approximately 50-inch overall length and 37-inch conduit dimensions help narrow the fit check for compatible push mowers.

Swess identifies MTD numbers 946-0957 and 746-0957 as replacements, while the approximate 50- to 50-1/4-inch cable and 37- to 37-1/4-inch conduit lengths support comparison with the original. Z-bend ends on both sides specify the connection style, and the listing also identifies blade-control, operator-presence, and mower-stop uses. With no extension spring specified, the cable is best considered when the original has the same configuration, not as a universal replacement.

Skip it if you need a 52-inch conduit and 59-inch inner wire for a Murray or Briggs & Stratton mower; Diskary 1101366MA lists those dimensions.

This is for owners matching MTD 946-0957 or 746-0957 who need a two-Z-bend cable for a compatible push mower. Check the stated lengths and no-spring configuration against the removed cable before fitting.

Listed on Amazon as: 946-0957 Engine Zone Control Cable for MTD 746-0957 Fits Most Push Mowers with Cable Length 50inch Conduit Length 37 inch

#7

7. Marsrut 183281 Cable

• Dimensions: 53.5 x 0.79 x 0.79 in
• Weight: 5 oz

Best for: Broad brand replacement cable.

Why it ranks #7: This brake stop cable replaces several listed numbers, including 290699 and 532183281, and gives a 53.1-inch cable with 46.9-inch conduit.

Five replacement numbers, including 290699 and 532183281, give the Marsrut brake-stop cable several ways to match an existing part. Its 53.1-inch cable and 46.9-inch conduit are specified alongside fitment across push mowers, weed eaters, and garden tractors from named brands.

The 53.1-inch cable and 46.9-inch conduit let owners compare overall routing dimensions, while the replacement-number list adds a separate identification route when the original part number is available. Marsrut names Briggs & Stratton, Craftsman, Sears, Roper, Poulan, and Husqvarna among compatible brands, and describes use across push mowers, weed eaters, and garden tractors. Because the stated applications span equipment types, check the specific model and ends rather than relying on brand alone.

Skip it if you have a Murray 20-, 21-, or 22-inch walk-behind mower and want that size range explicitly listed; Wanotine 440934 names it.

This is a reasonable match-check candidate for owners with one of the listed replacement numbers or named brands and equipment types. Confirm the exact model and cable ends, since brand-level fitment alone does not settle compatibility.

Listed on Amazon as: 290699 183281 Lawn Mower Cable Parts Fit for Craftsman 917 Briggs Stratton Poulan Husqvarna Roper 532183281 Push Eater Model Replacement, 198463 Throttle Rotary Engine Zone Control Brake Stop Cable

#8

8. Vicue 183281 Cable

• Weight: 1.76 oz

Best for: Brake-stop cable number match.

Why it ranks #8: It is identified as a brake stop cable and replaces 183281, 532183281, 198463, and 532198463, with a 53-1/2-inch cable.

The Vicue cable lists four replacement numbers—532183281, 183281, 198463, and 532198463—giving owners several identifiers to compare with a brake-stop cable. Its 53-1/2-inch cable and 46-1/2-inch conduit also provide concrete sizing details for a replacement check.

The four part numbers support identification when the original number is known, while the 53-1/2-inch cable and 46-1/2-inch conduit allow a dimensional comparison before installation. Vicue describes it as a brake-stop cable for Briggs & Stratton, Poulan, and Craftsman push mowers, which narrows the stated application. The listing asks buyers to compare fitment information, numbers, and pictures; that makes model-level checking important rather than treating the listed brand names as universal fit claims.

Skip it if you want listed model-level applications across Murray, Husqvarna, Craftsman, and Poulan; Wanotine 440934 provides specific examples.

This suits a buyer whose original cable carries one of the four listed numbers and whose push mower matches the stated brands. Check the model and cable ends as well, because specific mower models are not provided.

Listed on Amazon as: Brake Stop Cable for Briggs Stratton Poulan Craftsman Push Lawn Mower 290699 183281 532183281 532198463 New Version

#9 · Genuine Replacement

9. Briggs & Stratton 43828MA

• Dimensions: 8"L x 5.25"W
• Weight: 0.15 kg

Best for: Genuine Briggs & Stratton part.

Why it ranks #9: This genuine Briggs & Stratton engine stop cable is designed to OEM standards, but the listing gives limited fitment detail and a 39-inch cable length.

Briggs & Stratton identifies the 43828MA as a genuine Murray engine-stop cable, giving owners a named OEM part number to check against their equipment. The listing specifies a 39-inch cable and recommends genuine parts for maintaining Briggs & Stratton engines.

The 39-inch length offers a direct measurement to compare with the existing cable, while the 43828MA model number supports identification when that is the required replacement. Briggs & Stratton describes its genuine parts as made to exact OEM standards for its engines, making this option relevant to owners prioritizing a genuine branded component. The product is specifically presented as a Murray engine-stop cable; buyers should not infer fitment for other mower models from the brand alone.

Skip it if you need a 53-inch brake-stop cable with named cross-brand fitments; Marsrut 290699/183281 lists that length and several brands.

This suits owners seeking the genuine 43828MA Murray engine-stop cable whose mower calls for the stated 39-inch length. Its listing gives less model-specific fitment detail than some replacements, so confirm the exact part identity.

Listed on Amazon as: Murray 43828MA Engine Stop Cable 39.00-Inch for Lawn Mowers,Black

#10

10. Diskary 7103977YP Cable

• Dimensions: 66.4 x 1 x 1 in
• Weight: 6.7 oz

Best for: Long bail-cable applications.

Why it ranks #10: This listing describes a bail cable rather than a general engine stop cable, so it is a narrower match despite its 66.4-inch cable specification.

A 66.4-inch cable and 57.8-inch conduit make the Diskary 7103977YP the longest-dimensioned option in this group. Its listing identifies it as a bail cable replacement for Briggs & Stratton and Murray stop-cable applications and names compatible models and part numbers.

The 66.4-inch cable and 57.8-inch conduit help owners determine whether this longer routing matches their original, while the 7103977 and 7101861 identifiers provide additional replacement checks. Diskary lists numerous compatible model numbers, including several 780-series entries, rather than relying only on brand names. That model list can support a more specific fit check, but buyers should compare the original cable length and exact mower model before installation.

Skip it if you need a 39-inch Murray engine-stop cable; the Briggs & Stratton 43828MA listing specifies that shorter length.

This is for owners whose listed mower model requires a long bail cable and matches the 7103977YP application. Compare the 66.4-inch cable and 57.8-inch conduit with the original, since length is central to fit.

Listed on Amazon as: Diskary 7103977YP Bail Cable, Replacement for Briggs and Stratton Murray Stop Cable, Compatible with Models 7103977 7101861 Lawn Mowers