Best Timing Belt Kit For Subaru: Compare Complete Kits

#1 · Best Overall

1. AISIN TKF-006

• Weight: 10 lb
• Material: Aluminum, Ceramic
• Compatible with Vehicle Type: Car, Truck

Best for: OE-matched service pairing.

Why it ranks #1: The listing specifies OE-matched components and a water pump service kit for select Forester, Impreza, Legacy, and Outback applications.

OE-matched components are the defining feature of AISIN’s timing belt and water pump kit, giving Subaru owners a coordinated set for a combined service. AISIN recommends replacing these components together because the work involved is about the same as replacing either one alone, making the kit suited to a planned maintenance job.

The kit pairs a timing belt with a water pump, so the two components AISIN says should be replaced together are covered in one service. AISIN also specifies OE-matched components, like those fitted when a vehicle left the assembly line; that gives buyers a clear basis for choosing this kit when matching component type matters. The listing names select Forester, Impreza, Legacy, and Outback applications, but does not spell out their years or engines here, so the vehicle-specific match needs careful checking.

Skip it if you need model-year and engine-specific fitment spelled out in the supplied details; the listed applications are only described as select Subaru models.

This suits a Subaru owner planning to replace the timing belt and water pump in the same service, especially one seeking OE-matched parts. Its boundary is fitment: the listing does not specify years or engines for the select models.

Listed on Amazon as: AISIN GENUINE TKF-006 Engine Timing Belt Kit with Water Pump – Compatible with Select Subaru Forester, Impreza, Legacy, Outback

#2 · OE-Matched Alternative

2. AISIN TKF-001

• Weight: 7.4 lb

Best for: OE-matched AISIN service kit.

Why it ranks #2: AISIN identifies OE-matched kit components and includes a water pump, though the supplied listing gives less detailed Subaru fitment.

OE-matched components are the defining feature of AISIN’s TKF-001 timing belt and water pump kit, supporting a coordinated service with parts described as like those fitted at the factory. AISIN recommends replacing the belt and pump together, since the work involved is about the same as replacing either component alone.

The timing belt and water pump are presented as a service pairing: AISIN says the components should be replaced at the same time, since the labor involved is about the same as replacing one. That makes the combined kit relevant when either part is due for replacement. AISIN also describes the components as OE matched. The title names select Saab 9-2X and Subaru Forester and Impreza applications, but the supplied details do not give model years or engine sizes, limiting how specifically buyers can assess fitment.

Skip it if you need model-year and engine-specific fitment stated in the supplied details; the listed Saab and Subaru applications are described only as select models.

This suits Saab 9-2X or Subaru Forester and Impreza owners planning a combined belt-and-water-pump service and seeking OE-matched components. Its boundary is unspecified model years and engines, so the listed fitment is not precise.

Listed on Amazon as: AISIN GENUINE TKF-001 Engine Timing Belt Kit with Water Pump – Compatible with Select Saab 9-2X Subaru Forester, Impreza

#3 · Most Listed Components

3. BDFHYK TKF-006

• Weight: 9.64 lb

Best for: Five-seal 2.5L SOHC service.

Why it ranks #3: Its complete kit lists a pump, belt, tensioner pulley, three idlers, five camshaft seals, and an O-ring for specified 2.5L H4 SOHC applications.

Five camshaft seals join a water pump, belt, tensioner pulley, three idlers, and O-ring in this BDFHYK kit’s stated component list. Its fitment targets 2.5L H4 SOHC Forester, Impreza, Legacy, and Outback applications, giving those owners a broad collection of listed service parts.

The kit’s five camshaft seals and O-ring accompany the timing belt, water pump with gasket, tensioner pulley, and three idler pulleys. That combination is useful to buyers planning a multi-component timing service rather than sourcing each named item separately. Fitment is specified for 2.5L H4 SOHC applications: Forester 2006–2010, Impreza 2006–2011, Legacy 2010–2012, and Outback 2010–2012. The engine designation and model years provide the key boundaries for checking whether this package applies.

Skip it if you have a different engine configuration or a vehicle outside the listed model-year ranges; the stated fitment is specifically 2.5L H4 SOHC.

This suits owners of the specified 2.5L H4 SOHC Forester, Impreza, Legacy, and Outback years who want seals and multiple pulleys included. Treat its engine designation and year ranges as firm fitment boundaries.

Listed on Amazon as: BDFHYK TKF-006 Engine Timing Belt Kit with Water Pump Compatible with Subaru Forester 2006-2010, Impreza 2006-2011, Legacy 2010-2012, Outback 2010-2012 2.5L H4 SOHC Engine

#4

4. Betthand Timing Belt Kit

• Weight: 8.8 lb

Best for: EJ253 fitment with VIN caveat.

Why it ranks #4: The listing names EJ253 fitment and includes a belt, pump, tensioner, idlers, and seals, with an explicit Outback VIN exclusion.

An explicit EJ253 engine listing and a clear Outback VIN exclusion distinguish this Betthand kit for shoppers narrowing fitment. It covers specified 2.5L Forester, Impreza, Legacy, and Outback years, and includes a timing belt, water pump, tensioner assembly, and idlers for a coordinated service.

The stated fitment centers on the EJ253: 2006–2010 Forester, 2006–2011 Impreza, 2010–2012 Legacy, and 2009–2012 Outback, all described as 2.5L applications. The listing specifically excludes Outbacks with VIN code B, a useful boundary when checking an Outback before ordering. A water pump and gasket accompany the timing belt, tensioner assembly, two upper idlers, and one lower idler; the listed seals add further service components to the package.

Skip it if you own an Outback with VIN code B; the listing explicitly excludes it, while the VIN caveat is central to this kit’s fitment.

This kit fits buyers checking an EJ253 Subaru within the listed years who want a water pump, belt, tensioner, idlers, and seals together. Outback owners must observe the VIN B exclusion, which rules out those applications.

Listed on Amazon as: Timing Belt Kit w/Water Pump Fit for 2006-2010 Subaru Forester, 2.5L

#5

5. DWLDMLWC Timing Belt Kit

• Weight: 4.03 kg
• Material: Alloy Steel, Aluminum, Metal, Stainless Steel
• Compatible with Vehicle Type: Car

Best for: Seals-and-tensioner kit.

Why it ranks #5: Its listed contents include a water pump, hydraulic tensioner, idler bearings, and seals, with fitment details for several 2.5L Subaru applications.

Four camshaft seals, a crankshaft seal, grease, and the main timing components make this DWLDMLWC kit notably inclusive on listed parts. It targets several 2.5L Subaru applications, with the supplied compatibility details naming Forester, Impreza, Impreza Sport, and Legacy models across specified model years.

The listed kit combines a timing belt and water pump with a tensioner assembly, three idlers, seals, and grease, so buyers can plan a broader timing service around the supplied components. Its compatibility information names 2006–2010 Forester 2.5L, 2006–2011 Impreza, 2008–2011 Impreza Sport 2.5L, and 2006–2012 Legacy 2.5L. The alloy steel, aluminum, metal, and stainless steel materials are specified, while the listed one-year warranty supplies a stated warranty term.

Skip it if you need a kit for a Subaru outside the listed model-year and engine applications; the compatibility details do not cover every Subaru.

This is for owners whose Subaru matches the listed 2.5L-era Forester, Impreza, Impreza Sport, or Legacy applications and who want seals included with timing components. Check the exact vehicle against its stated fitment before choosing.

Listed on Amazon as: Timing Belt Kit with Water Pump Compatible with 2.5L Subaru

#6 · Seal-Inclusive Kit

6. Gledewen Timing Belt Kit

• Material: Metal
• Compatible with Vehicle Type: Car

Best for: SOHC H4 and Saab coverage.

Why it ranks #6: The kit lists a water pump, tensioner, three idlers, four camshaft seals, a crankshaft seal, and applications including Subaru SOHC engines.

A stated SOHC H4 application list covering several older Subaru models and Saab 9-2X versions is the key distinction of this Gledewen kit. The parts list names four camshaft seals, three timing idlers, an O-ring, crankshaft seal, tensioner, and water pump alongside the belt.

The compatibility details specify 1999–2005 Forester 2.5L, 1999–2005 Impreza 2.5L, selected 2.2L Impreza years, 2000–2005 Outback 2.5L, and 2005–2006 Saab 9-2X 2.5L, all described as SOHC H4 applications. That specificity helps narrow its use to the listed configurations. The component list supports a broad scheduled service, combining the belt and water pump with seals, three idlers, and a tensioner rather than listing the belt alone.

Skip it if you have an engine or model year outside the listed SOHC H4 applications; this kit’s stated coverage is specific to those configurations.

This suits an owner with a listed older SOHC H4 Subaru or Saab who wants seals, idlers, a tensioner, and a pump in the kit. Verify that the model year and engine match its stated application list.

Listed on Amazon as: Engine Timing Belt Kit with Water Pump Compatible with Subaru 2000-2005 Outback 1999-2005 Impreza Forester & Saab 2005-2006 9-2X SOHC H4 2.2L 2.5L

#7

7. INGKAN Timing Belt Kit

• Weight: 4.09 kg
• Material: Metal
• Compatible with Vehicle Type: Car

Best for: Earlier EJ251/EJ253 Subaru service.

Why it ranks #7: It identifies EJ251 and EJ253 applications and lists fitment for older Forester, Impreza, Legacy, Outback, and Saab models.

Coverage for EJ251 and EJ253 engines across older Subaru model years gives this INGKAN kit its clearest use case. Its stated applications include Forester and Impreza from 1999–2005, plus Legacy, Outback, and Saab 9-2X applications, making it a candidate for earlier-model service work.

The fitment list spans 1999–2005 Forester 2.5L and Impreza 2.2/2.5L, alongside 2000–2005 Outback 2.5L and specified Legacy and Saab 9-2X applications. That model-and-engine detail helps owners distinguish this kit from newer Subaru fitments. Its listed replacement references include belt, pump, and other OE numbers, while the product is described as a metal kit. The supplied information does not enumerate the package contents, so buyers should not assume a particular seal or pulley count.

Skip it if you want a fully itemized list of included seals, pulleys, and other parts before choosing; the supplied details do not provide one.

This is aimed at owners of the listed earlier EJ251 or EJ253 Subaru applications, including certain Forester, Impreza, and Outback models. Its key boundary is package transparency: the supplied information does not itemize the included components.

Listed on Amazon as: EJ251 EJ253 Engine Water Pump Timing Belt Kit Fits for Subaru Forester 99-05/ Impreza 99-05/ Legacy 1999/ Outback 00-05, Saab 9-2X 05-06 2.5L OE 13028-AA231 13073-AA080 13073-AA190

#8

8. A-Premium Timing Belt Kit

• Weight: 9.31 lb

Best for: Older naturally aspirated SOHC fitment.

Why it ranks #8: Its fitment notes specify H4 2.5L naturally aspirated SOHC engines and distinguish manual-transmission Forester applications.

A detailed year, transmission, and production-date fitment breakdown makes this A-Premium kit unusually specific for earlier Subaru applications. It is limited to naturally aspirated SOHC H4 2.5L configurations, with special distinctions for certain 2002 Forester builds and Outback VIN coding.

The fitment notes separate Forester applications by year, transmission, and even whether a 2002 vehicle falls before or after November 1, helping buyers assess a more exact match. They also specify Outback 2000–2005 with VIN fourth digit G and identify the engine as naturally aspirated, SOHC, H4 2.5L only. The title identifies a timing belt kit with water pump and tensioner, but the supplied details do not enumerate other package contents.

Skip it if you have a turbocharged, DOHC, or non-2.5L engine; the listing limits this kit to naturally aspirated SOHC H4 2.5L fitment.

This targets owners of the listed older naturally aspirated SOHC 2.5L Subaru or Saab applications who can check transmission, production date, and VIN details. Its narrow engine and vehicle conditions make exact fitment essential.

Listed on Amazon as: A-Premium Engine Timing Belt Kit with Water Pump Tensioner

#9

9. ATRACYPART Timing Belt Kit

• Weight: 4.3 kg
• Material: Metal
• Compatible with Vehicle Type: Car

Best for: VIN-specific later Subaru fitment.

Why it ranks #9: The listing gives a belt size of 223 teeth by 27 mm and fitment for several Subaru models, with an Outback VIN exclusion.

An explicit VIN B exclusion for Outback applications makes this ATRACYPART kit’s fitment caveat especially important. The listing covers specified 2006–2012 Subaru models and includes a 223-tooth, 27mm timing belt with a water pump, alongside several replacement references for fitment checks.

Compatibility details name 2006–2010 Forester, 2006–2011 Impreza, 2010–2012 Legacy, and 2009–2012 Outback, while explicitly excluding Outbacks with VIN code B. The supplied package description specifies a 223-tooth, 27mm belt and a water pump, giving buyers concrete details to compare against their application. The listing also provides several replacement references. Its stated 12-month warranty is another published ownership term, though the fitment restriction remains the key boundary for Outback shoppers.

Skip it if you own an Outback with VIN code B; this listing explicitly excludes that application, so its broader Outback year range does not apply.

This is for owners of listed Subaru applications seeking a belt and water pump with specific belt dimensions stated. Outback buyers must check the VIN caveat: VIN code B applications are expressly excluded.

Listed on Amazon as: Timing Belt Kit Water Pump Fit For 06-12 Subaru Forester Outback 2.5L

#10

10. KAX Timing Belt Kit

• Weight: 5.63 lb

Best for: Broad listed model-year coverage.

Why it ranks #10: It lists broad Subaru model applications and a replacement reference, but the supplied details do not establish a water pump in the kit.

A wide Subaru application list, from older Forester and Impreza versions to 2010–2012 Outback and Legacy 2.5L models, distinguishes this KAX timing belt kit. It also names a 2005 Saab 9-2X 2.5L application and identifies replacement reference 13033AA042 in the title.

The fitment information covers many Forester, Impreza, Legacy, and Outback configurations, with engine sizes and body styles specified for numerous Impreza entries. That breadth can help owners of less commonly listed Impreza variants narrow the search, while the 2010–2012 Outback and Legacy 2.5L coverage is stated directly. The title identifies replacement reference 13033AA042. The supplied details do not itemize the package contents, so this listing alone does not establish which additional service components come with the belt.

Skip it if you need confirmation that a water pump, tensioner, or seals are included; the supplied KAX details do not list the package contents.

This suits Subaru owners whose vehicle appears in KAX’s extensive application list, including specified Outback and Legacy 2.5L models. The important boundary is component certainty: the supplied details identify fitment, not an itemized kit inventory.

Listed on Amazon as: KAX Timing Belt Kit for 2010-2012 Subaru Outback 2.5L, Replaces 13033AA042