Best Struts For Subaru Outback: Compare Complete Assemblies

#1 · Best Overall

1. Detroit Axle 6-Piece Strut Kit

• Compatible with Vehicle Type: Car
• Weight: 62 lb

Best for: 2013–2014 struts with front links.

Why it ranks #1: For 2013–2014 Outbacks, it includes four complete struts with coil springs and two front sway bar links, plus a listed 10-year warranty.

Six pieces combine complete front and rear strut assemblies with two front sway-bar end links for 2013–2014 Subaru Outbacks. That pairing lets a suspension refresh address both ends of the vehicle and the front links in one kit, while the assemblies arrive ready for installation without special tools or additional work.

The two complete struts at each end include coil springs, and the kit adds a pair of front stabilizer sway-bar end links. Together, these components cover front and rear strut replacement alongside front link replacement, reducing the need to source those listed parts separately. Detroit Axle says the assemblies require no additional work or special installation tools, and reports impact, wear, and fatigue testing. Fitment is specified for 2013–2014 Outbacks.

Skip it if you need rear sway-bar links too; the TRQ PSA84798 kit B0CSH7XYQQ includes front and rear links.

Consider this kit for a 2013–2014 Outback when replacing all four struts and the front sway-bar links together. The link coverage is front-only, so it does not supply rear sway-bar links for the same repair.

Listed on Amazon as: Detroit Axle – 6pc Struts Sway Bar Links for 2013 2014 Subaru Outback

#2 · Full-Year Coverage

2. Complete Struts 2005–2009 Set

• Compatible with Vehicle Type: Car
• Material Type: Alloy Steel, Rubber

Best for: Full-vehicle refresh for 2005–2009.

Why it ranks #2: This set supplies two front and two rear quick complete strut assemblies for 2005–2009 models, but excludes ride-height adjustment and electronic suspension.

Four fully assembled quick struts—two front and two rear—replace the complete set without rebuilding the old struts. For owners of 2005–2009 Subaru Outbacks, that all-corner coverage brings the replacement components together in one kit, while excluding models with ride-height adjustment or electronic suspension control.

The front-and-rear set includes coil-spring strut assemblies, so the repair replaces complete units rather than requiring you to rebuild the old struts. Alloy steel and rubber are the listed materials, and the kit covers all four corners of the specified Outback years. The manufacturer recommends inspecting control-arm bushings and ball joints for wear that could cause alignment issues; an alignment is also needed after installation to return the suspension to factory configuration.

Skip it if you have a 2000–2004 Outback; the Complete Struts set B0193NGEEK covers those model years instead.

Choose this set if you are refreshing all four corners of a 2005–2009 Outback and want complete assemblies rather than rebuilding old struts. It does not fit versions with ride-height adjustment or electronic suspension control.

Listed on Amazon as: COMPLETESTRUTS – Front & Rear Quick Complete Strut Assemblies with Coil Springs Replacement for 2005-2009 Subaru Outback – Set of 4

#3 · Early-Model Set

3. Complete Struts 2000–2004 Set

• Compatible with Vehicle Type: Car
• Material Type: Rubber

See also  Best Long Lasting Dishwasher: Top 10 Picks!

Best for: Four-corner kit for 2000–2004 Outbacks.

Why it ranks #3: It provides four quick complete assemblies across the front and rear for 2000–2004 Outbacks, with a stated one-year manufacturer warranty.

Two front and two rear quick complete strut assemblies with coil springs cover all four corners of 2000–2004 Subaru Outbacks. Because the units are fully assembled, the set avoids rebuilding old struts and gathers the front and rear replacements together for owners refreshing the suspension across the vehicle.

The four-piece kit pairs front and rear complete assemblies, each supplied as a quick strut with coil spring. That format replaces the old struts as complete units rather than requiring a rebuild, while its model-year range focuses the kit on 2000–2004 Outbacks. Before installation, the manufacturer recommends inspecting control-arm bushings and ball joints for wear that may affect alignment; a wheel alignment is needed after the new struts are installed.

Skip it if you drive a 2005–2009 Outback; the Complete Struts set B0193MQ2FW covers those later model years.

This is a suitable route for owners replacing all four struts on a 2000–2004 Outback with complete spring assemblies. Plan for an alignment after installation, and inspect related suspension joints for wear before the job.

Listed on Amazon as: COMPLETESTRUTS – Front & Rear Quick Complete Strut Assemblies with Coil Springs Replacement for 2000-2004 Subaru Outback – Set of 4

#4 · Most Added Links

4. TRQ 8-Piece Suspension Kit

• Weight: 31.5 lb

Best for: Eight-piece DIY suspension refresh.

Why it ranks #4: For 2013–2014 Outbacks, the kit includes front strut and rear shock assemblies, plus two front and two rear sway bar links.

Eight pieces cover front strut and spring assemblies, rear shock and spring assemblies, and sway-bar links at both ends. Listed for Subaru Outback 2013–2014, the TRQ kit bundles these suspension components for a broad front-and-rear refresh, with application-specific design that requires no modification.

The two front strut-and-spring assemblies and two rear shock-and-spring assemblies address both ends of the Outback, while four sway-bar links add front and rear link replacement to the same job. Bundling those eight pieces can simplify parts gathering for a full suspension refresh. TRQ also offers a catalog of DIY replacement-parts videos, which can support a do-it-yourself workflow. The stated fitment is Subaru Outback 2013–2014.

Skip it if you have a 2010–2012 Outback and need front struts; the Monroe Quick-Strut 272686 B073K12HZQ is listed for those years.

This kit fits buyers tackling front and rear suspension components on a 2013–2014 Outback, including sway-bar links at both ends. Its broad component coverage is specific to those model years, not a general Outback fit.

Listed on Amazon as: TRQ Front and Rear Suspension Kit Complete Strut & Coil Spring Assembly

#5

5. KUIPERAUTO 2000–2004 Assembly Set

• Compatible with Vehicle Type: Car

Best for: Preassembled 2000–2004 suspension set.

Why it ranks #5: The four-piece kit lists front and rear assemblies for 2000–2004 Outbacks, with preassembled upper mounts and coil springs.

A four-piece front-and-rear kit with preassembled upper mounts and coil springs targets Subaru Outbacks from 2000 through 2004. Its OE-matching design is intended to simplify fitting the complete assemblies while supporting stable handling, giving owners a single set for both ends rather than a front-only replacement.

The kit includes two front and two rear struts, with the upper mount and coil spring preassembled into the assemblies. That combination can simplify the replacement workflow compared with assembling those listed components separately. KUIPERAUTO describes the design as matching factory specifications and supporting stable handling; the stated vehicle range is limited to 2000–2004 Outbacks. Check that the vehicle falls within that range before choosing the set.

Skip it if you own a 2005–2009 Outback; the Complete Struts set B0193MQ2FW covers those model years.

This set suits owners replacing front and rear assemblies on a 2000–2004 Outback who value preassembled mounts and springs. Its stated fit range is narrow, so it is not the choice for later Outback years.

Listed on Amazon as: KUIPERAUTO Front and Rear Strut Assembly Compatible with Subaru Outback 2000-2004 Suspension Replacement 171113 172243 172242 4PCS

#6 · Front-Only Assembly

6. Monroe Quick-Strut 272686

• Compatible with Vehicle Type: Car
• Material Type: Alloy Steel
• Weight: 23 lb

Best for: Front ride-height restoration.

Why it ranks #6: This front assembly fits 2010–2012 Outbacks and includes an application-specific coil spring and mounting hardware in a preassembled unit.

Monroe’s fully assembled Quick-Strut includes the components needed for replacement without a spring compressor and targets 2010–2012 Subaru Outbacks. Its application-specific coil spring is calibrated to restore ride height and support vehicle weight, making it a focused front strut option for that stated fitment.

The complete, preassembled unit avoids the separate spring-compressor step, which can simplify the replacement process. Monroe says its application-specific coil spring is calibrated to restore ride height and support the vehicle’s weight, linking the spring choice to the intended vehicle rather than a universal setup. The product is listed for 2010–2012 Outbacks and includes mounting hardware. It is an individual suspension strut assembly, not a four-corner kit.

Skip it if you need both front sides covered in one purchase; the Detroit Axle pair B0CN2K654D includes two front assemblies for specified 2010–2012 models.

Pick this Quick-Strut if you need an assembled strut for a 2010–2012 Outback and want an application-specific spring with ride-height restoration stated. Account for its single-assembly scope when planning a pair or full-vehicle repair.

Listed on Amazon as: Monroe Quick-Strut 272686 Suspension Strut and Coil Spring Assembly for Subaru Outback

#7

7. Detroit Axle Front Struts

• Weight: 30 lb

Best for: Front struts for specified 2010–2012 models.

Why it ranks #7: The pair of complete front struts with coil springs fits listed 2010–2012 2.5L models with automatic CVT or 3.6L models.

A pair of complete front struts with coil-spring assemblies targets specified 2010–2012 Subaru Outback powertrain versions. The preassembled units arrive ready for installation without special tools or additional work, making this a focused front-end replacement rather than a kit for refreshing the rear suspension too.

Detroit Axle supplies two complete front struts with coil-spring assemblies, so the listed repair covers both front sides without requiring separate spring assembly. The manufacturer says the units are ready to install with no additional work or special tool required, which can simplify the replacement workflow. The fitment specifies 2010–2012 Outback 3.6L models and 2.5L models with automatic CVT transmission; it does not list a rear assembly.

Skip it if you want a front strut with ride-height-restoring, OE-calibrated spring details; Monroe Quick-Strut 272686 B073K12HZQ lists those features.

Choose this pair for a front-end strut replacement on a listed 2010–2012 Outback engine and transmission configuration. It does not supply rear assemblies, and its specified fitment does not cover every version in those model years.

Listed on Amazon as: Detroit Axle – Front Struts for 2010 2011 2012 Subaru Outback

#8

8. AISIN SAKF-01780 Assembly

• Compatible with Vehicle Type: Car
• Material Type: Steel

Best for: Preassembled front unit for 2018–2019.

Why it ranks #8: This preassembled front strut and coil spring assembly is listed for 2018–2019 Outbacks and has a stated one-year warranty.

AISIN combines the strut, coil spring, and upper components in a preassembled front suspension unit for Subaru Outbacks from 2018–2019. Replacing multiple wear components together can simplify the parts workflow, while its validated damping design is intended to support stable suspension response and proper ride height.

The preassembled assembly groups the strut, coil spring, and included upper components, allowing several wear components to be replaced together rather than sourced as separate items. AISIN says its validated damping design supports stable suspension response and proper ride height, connecting the assembly’s design to everyday suspension function. The stated compatibility is Subaru Outback 2018–2019, and the product is a front strut assembly, not a complete front-and-rear kit.

Skip it if you need a four-corner set for an older Outback; Complete Struts B0193MQ2FW covers all corners of 2005–2009 models.

This assembly fits buyers replacing a front strut on a 2018–2019 Outback who want the spring and upper components grouped together. Its listed fitment is limited to those years, and it does not cover the rear.

Listed on Amazon as: AISIN AFTERMARKET SAKF-01780 Front Suspension Strut & Coil Spring Assembly

#9

9. AUTOMUTO Complete Struts

• Weight: 71.8 lb

Best for: Front-and-rear 2005–2009 replacement.

Why it ranks #9: Listed for 2005–2009 Outbacks, this product describes front and rear complete struts, but the supplied details do not specify the assembly count.

Front-and-rear complete strut assemblies target Subaru Outbacks from 2005 through 2009, making this a full-vehicle replacement option rather than a single-axle part. The listing connects replacement with symptoms such as excessive bounce, poor steering response, unusual tire wear, or leaking strut fluid.

AUTOMUTO lists this as a front-and-rear complete strut assembly set for 2005–2009 Outbacks and identifies several signs that may prompt replacement, including excessive bounce, poor braking performance, and unusual tire wear. That symptom guidance can help owners recognize when suspension evaluation is warranted, while the stated front-and-rear scope supports a broader repair. The supplied details do not specify the number of assemblies or installation tools, so check the listing’s kit contents before planning the job.

Skip it if you want a clearly stated four-piece 2005–2009 set; Complete Struts B0193MQ2FW lists two front and two rear assemblies.

Consider this option if you are evaluating front-and-rear strut replacement on a 2005–2009 Outback and recognize the listed wear symptoms. Verify the kit contents in its product listing before scheduling a complete repair.

Listed on Amazon as: AUTOMUTO Front Rear Complete Struts Assembly for Subaru Outback 2005-2009

#10

10. cciyu Rear Strut Pair

• Compatible with Vehicle Type: struts and shocks for 2005 2006 2007 2008…
• Material Type: Rubber

Best for: Rear strut pair for 2005–2009.

Why it ranks #10: This two-piece rear strut option fits 2005–2009 Outbacks, but it covers only the rear rather than a complete vehicle set.

A two-piece rear complete strut set is listed for Subaru Outbacks from 2005 through 2009. Each strut assembly incorporates a coil spring, providing a complete rear replacement unit rather than a bare shock, for owners addressing the back of the vehicle without purchasing a front-and-rear kit.

The product is specifically described as a rear complete strut pair for 2005–2009 Outbacks, and its listed assembly design incorporates the coil spring with the strut. That makes it a rear-focused option for replacing complete units rather than sourcing a shock alone. The supplied information does not describe front assemblies or additional suspension components, so buyers planning a broader repair should account for those parts separately.

Skip it if you need all four corners in one set; the Complete Struts kit B0193MQ2FW includes front and rear assemblies for 2005–2009 Outbacks.

This pair suits a 2005–2009 Outback owner replacing complete rear struts while keeping the repair focused on the back of the vehicle. It does not provide front assemblies for a full four-corner refresh.

Listed on Amazon as: CCIYU Rear Complete Strut shock and Strut Fit for Subaru Outback 05-09 2PCS