Best Atv Bow Holder for ATV and UTV Gear

#1 · Best Overall

1. KEMIMOTO Rubber-Grip Holder

• Weight: 1.36 kg
• Material: Nylon Core, Thick Rubber Coating
• Material Type: Nylon Core, Thick Rubber Coating

Best for: Higher-capacity multi-vehicle users.

Why it ranks #1: Its nylon core, thick rubber coating, locking fins, and straps support bow carrying; the listing states a 44-pound capacity and 45-degree tilt.

A listed 44-pound load capacity and tilt to 45 degrees give this KEMIMOTO holder a combination of carrying strength and positioning flexibility. Its thick rubber coating over a nylon core absorbs impacts, while locking fins and straps help secure bows, fishing poles, shovels, and other listed gear.

The rubber-coated nylon core is intended to absorb impact on rough terrain, making the mount relevant for riders carrying gear over uneven routes. Its 45-degree tilt provides an alternate carrying position, but the instructions say not to place heavy objects fully tilted. The holder lists a 44-pound capacity and broad use across ATVs, tool strollers, hunting bikes, treestands, snowmobiles, and mobility scooters. Rubber locking fins and straps add restraint for carried gear.

Skip it if you need to carry heavy gear fully tilted; the Kolpin Rhino Grip XL instead cautions against full-tilt transport of guns and heavy objects too.

This fits buyers seeking a higher listed capacity, impact-absorbing construction, and use across several vehicle types. Keep heavy gear out of the fully tilted position, and use its 45-degree adjustment within that boundary.

Listed on Amazon as: KEMIMOTO Tool Holder for ATV, Hunting Bow Rack with Rubber Grips

#2 · Best Adjustable Mount

2. Kolpin Rhino Grip XL

• Weight: 1.6 lb
• Material: Rubber, Steel
• Material Type: Rubber, Steel

Best for: Adjustable two-item ATV carriers.

Why it ranks #2: Carries two items with a listed 15-pound capacity, tilts 160 degrees in increments, rotates 360 degrees, and fits 5/8-to-1-inch bars.

A 160-degree tilt in 40-degree increments and a 360-degree rotating base let the Kolpin Rhino Grip XL adapt its position around ATV or e-bike racks and handlebars. Its rubber-over-molded nylon construction and straps carry two items, with carrying strength listed up to 15 pounds.

Mounting options include tubular ATV racks and handlebars measuring 5/8 to 1 inch, as well as ATV or e-bike racks, giving riders several placement choices. The rotating base and stepped tilt help orient the two-item holder to the vehicle and carried gear. Rubber over-molded nylon and straps provide a cushioned, secured hold; however, the instructions caution against carrying guns or heavy objects in the full-tilt position. The listed carrying strength is up to 15 pounds.

Skip it if you need a single-item holder with no stated 15-pound ceiling; the KEMIMOTO Tool Holder B09MRJMS92 lists a 44-pound load capacity.

Pick this for two listed items when adjustable orientation helps position them on an ATV or e-bike. Its 15-pound carrying strength and warning against full-tilt transport of guns or heavy objects set clear limits.

Listed on Amazon as: Kolpin Rhino Grip XL – Rack/Handlebar Mount – 21530, Black

#3 · Best Shock Isolation

3. ATV Tek FlexGrip Pro

• Weight: 2 lb

Best for: Custom-fit single-rack adjusters.

Why it ranks #3: Its Shok Tek design is specified to isolate recoil and vibration, while the mount provides an additional 16 inches of horizontal adjustment.

Sixteen inches of additional horizontal adjustment lets the ATV Tek FlexGrip Pro Single position its holder across an ATV or UTV rack. Patented FlexGrip compartments accommodate listed gear such as bows, guns, soft cases, and handled tools, while Shok Tek technology isolates recoil and vibration.

The added 16 inches of side-to-side adjustment helps users align the holder with their preferred position after mounting, while the FlexGrip compartments accommodate different listed item types, including bows and soft cases. Shok Tek technology is intended to isolate recoil and vibration on rough trails. The product also lists quick installation through an updated tubular and composite mounting system, described as requiring no tools or help. Together, those features support a customized setup without a tool-dependent installation process.

Skip it if you need to carry two items at once; the ATV Tek V-Grip Single B004FGX2H8 is also a single rack, so choose a double-rack model instead.

This is for ATV or UTV riders who want a single holder with substantial side-to-side positioning adjustment and vibration isolation. Its single-item format makes it a poor match when one trip must carry paired gear.

Listed on Amazon as: ATV TEK FlexGrip Pro Single ATV Gun Rack for Rifles, Bows & Tools

#4 · Best Space Saver

4. Graspur ATV1

• Weight: 6 oz

Best for: Single-item cargo rack users.

Why it ranks #4: The offset single holder is designed to preserve cargo-rack space, grips gear with rubber spurs, and fits bars from 5/8 to 1 inch.

An offset holder preserves more cargo-rack space while carrying one gun, bow, fishing rod, or shovel. The Graspur ATV1’s soft rubber-covered nylon core and cushioning spurs grip gear, and its mounting range covers standard 5/8- to 1-inch bars for ATV, bike, or tree-stand use.

The ATV1 attaches to handlebars, tubular bars, or railings from 5/8 to 1 inch, giving riders with standard-size bars a straightforward mounting option. Its offset layout leaves more room on the cargo rack for other gear, while the rubber spurs cushion and grip the carried item. The one-piece holder carries a single item, making it a focused choice for a bow or other listed gear rather than a two-item setup. It is not recommended for ice augers or crossbows.

Skip it if you need to carry two items or an ice auger; the All Rite Products ATV2 holds two side by side, though it also excludes ice augers.

Choose this for one bow or another listed item on an ATV, bike, or tree stand when keeping cargo space open matters. Its 5/8- to 1-inch bar fit is the key mounting boundary.

Listed on Amazon as: Graspur Single ATV Gun & Bow Rack – Model ATV1

#5

5. Graspur ATV2

• Weight: 6 oz
• Material: Alloy Steel, Nylon, Rubber
• Material Type: Alloy Steel, Nylon, Rubber

Best for: Two-item ATV rack owners.

Why it ranks #5: This double rack carries two items side by side and fits tubular bars or railings from 5/8 to 1 inch; it is not recommended for crossbows.

Two side-by-side holders let the All Rite Products Graspur ATV2 carry a pair of guns, shovels, or fishing rods on an ATV. Its soft rubber spurs cushion and grip each item, while the one-piece design attaches to tubular bars or railings from 5/8 to 1 inch.

The ATV2’s two-item layout suits riders who want to transport paired gear rather than a single bow or tool. It mounts to 5/8- to 1-inch tubular bars or railings, so the stated bar range helps determine whether the rack matches the vehicle’s mounting points. Soft rubber spurs cushion and grip items, and the durable one-piece design keeps the holder arrangement simple. The listing does not recommend it for ice augers or crossbows.

Skip it if you need one holder for a crossbow or ice auger; the KEMIMOTO Tool Holder B07GDFS9YP lists both among its compatible gear.

Choose this for ATV trips when carrying two guns or other listed gear side by side is more useful than a single-item mount. Its bar fit is limited to 5/8- to 1-inch rails, and crossbows and ice augers are excluded.

Listed on Amazon as: Graspur Double ATV Gun & Bow Rack – Model ATV2

#6

6. ATV Tek V-Grip

• Weight: 2.7 lb
• Material: Plastic
• Material Type: Plastic

Best for: Single-rack slot adjusters.

Why it ranks #6: Its SmartBlock mount fits tubular and composite racks from 0.5 to 1.25 inches, with dedicated bow, gun, and utility slots.

The SmartBlock mount fits tubular and composite racks from 0.5 to 1.25 inches, giving ATV Tek’s V-Grip Single a broad stated mounting range. Its gun, bow, and utility slots accommodate listed gear, while the V-Grip design isolates recoil and road vibration during trail transport.

The 0.5- to 1.25-inch SmartBlock range covers a variety of tubular and composite racks, and finger-adjustable knobs support adjustment without relying on a fixed setup. Separate gun, bow, and utility slots provide options for rifles, soft cases, archery equipment, and handled tools. The V-Grip design is described as isolating recoil and road vibration, which helps protect gear in transit. This remains a single rack, so it carries one item at a time.

Skip it if you need horizontal adjustment extending 16 inches; the ATV Tek FlexGrip Pro Single B004FGY6HI lists that side-to-side adjustment.

Choose this for one firearm, bow, or handled tool when a wide rack-size range and distinct slots matter. It is a single-item carrier, and its listed fit is limited to 0.5- to 1.25-inch racks.

Listed on Amazon as: ATV Tek V-Grip Single ATV Gun Rack for Rifles, Bows & Tools

#7

7. Pack Rack Plus PRP1

• Weight: 1.27 lb

Best for: Rotating gear and tool carriers.

Why it ranks #7: The holder rotates 360 degrees and uses rubber-coated forks with cushion fins; its listing describes use on ATVs, bikes, and treestands.

A full 360-degree rotating holder lets the All Rite Products Pack Rack Plus adjust to different-sized objects by turning it and locking the wing nut. Soft rubber-coated forks with cushion fins grip listed gear, and its universal use covers ATVs, bikes, shooting carts, and treestands.

Rotation lets users change the holder’s position for rifles, shotguns, bows, rods, shovels, and other tools, then lock the angle with the wing nut. That adjustment can help accommodate different-sized objects without changing the gear category. Internal steel components and aluminum mounting blocks provide the described durable mount, while rubber-coated forks and cushion fins protect and grip the item. Its listed vehicle range includes ATVs, bicycles, shooting carts, and treestands.

Skip it if you need a documented bar-diameter range before choosing; the All Rite Products ATV1 B0002MFJ20 specifies 5/8- to 1-inch bars.

This fits buyers who value a lockable rotating holder for varied gear on an ATV, bike, shooting cart, or treestand. The supplied details do not give a mounting diameter range, so that is the key fit consideration.

Listed on Amazon as: Pack Rack Plus – Gun & Bow Rack for ATVs and Bikes – Model PRP1

#8

8. KEMIMOTO Tool Holder KMFTVGR001

• Weight: 0.37 kg
• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Multi-vehicle tool and bow haulers.

Why it ranks #8: A steel core, rubber security straps, and anti-slip design suit varied gear, and its verified mounting range is 0.8 to 1.3 inches.

A steel core beneath soft rubber supports a listed 30-pound load, while rubber security straps help keep tools and bows in place. KEMIMOTO’s holder fits 0.8- to 1.3-inch tubular rails and works across ATVs, tool strollers, hunting bikes, scooters, snowmobiles, and treestands.

The wide vehicle compatibility makes this a practical option for moving the same kinds of gear between an ATV, snowmobile, mobility scooter, or tool stroller. Its steel core and soft rubber covering pair support with a surface intended not to scratch carried items; the listing gives a 30-pound load capacity. Rubber straps and an anti-slip design add restraint, while the 0.8- to 1.3-inch rail range defines where the stainless-steel mount can attach.

Skip it if you need to mount on a 5/8-inch bar; the Kolpin Rhino Grip XL lists fit for bars from 5/8 inch.

This suits riders and hunters who move tools, bows, or fishing poles among compatible vehicles and a tool stroller. Choose it only when the mounting rail falls within its stated 0.8- to 1.3-inch range.

Listed on Amazon as: KEMIMOTO ATV Tool Holder, Hunting Bow Rack Mount with Rubber Straps

#9

9. Lonsda Single Holder

• Weight: 2.38 lb

Best for: Rotating multi-vehicle mount users.

Why it ranks #9: Its mount fits specified round and square tubes and offers 360-degree rotation, but the listing gives less verified load and bow-retention detail.

A 360-degree rotating rack with 180-degree horizontal adjustment lets the Lonsda holder change orientation to suit the mounting position. It fits 18- to 38-millimeter round tubes and 16- to 35-millimeter square tubes, with listed use on ATVs, UTVs, golf carts, RVs, and bicycles.

The round- and square-tube ranges give buyers two stated mounting shapes to work with, across several vehicle types. After installation, the 360-degree rotation and 180-degree horizontal adjustment allow the holder’s position to change for the situation. It is listed for guns, bows, and tools such as shovels, hoes, and sickles. Six rubber spurs offer several positions for the elastic rubber ring, supporting a more adjustable way to retain gear.

Skip it if you need a round-tube mount for a 5/8-inch bar; the Kolpin Rhino Grip XL lists fit beginning at 5/8 inch.

This suits buyers who want a rotating holder for listed tools or hunting gear across several vehicle types. Check the tube shape and stated dimensions first; its round-tube range begins at 18 millimeters.

Listed on Amazon as: ATV/UTV Gun Rack Hunting Bow Holder Mount for Bike/Golf Cart, Single

#10

10. KEMIMOTO Quick-Release Rack

• Weight: 3.34 lb

Best for: Quick-access single-button users.

Why it ranks #10: The one-button clamp and 360-degree swivel offer quick access, but its listing focuses on a tool rack and provides no bow-specific fit detail.

A press-button clamp opens instantly for one-handed gear access, making the KEMIMOTO holder useful when riders need to retrieve a tool or bow between stops. Its stated fit covers 0.75- to 1.25-inch round tubes on ATVs, select UTVs, and side-by-sides, with a 360-degree swivel.

The one-button opening avoids twisting or prying when releasing gear, supporting quick access during a stop. Installation uses included hardware and position shims: place the base on the tube and secure the upper and lower sections without extra tools. The mount fits round tubes from 0.75 to 1.25 inches and swivels 360 degrees, giving buyers defined compatibility and positioning options. Its listed vehicle coverage includes ATVs, select UTVs, and side-by-sides.

Skip it if you need a mount for square tubing; the Lonsda holder B0FGXTV844 lists fit for both round and square tubes.

Choose this for ATV and select UTV riders who value one-handed release and swivel positioning for gear. Its stated fit is restricted to 0.75- to 1.25-inch round tubes, so square-tube mounts are outside its listed compatibility.

Listed on Amazon as: KEMIMOTO ATV Tool Rack, One-Button Quick Release Bow Holder with 360°Swivel