Best RV Leveling Blocks Dual Wheels for Tandem Tires

#1 · Best Overall

1. Camco FasTen 4×2 Blocks

• Dimensions: 10.69 x 17.06 x 8.69 in
• Weight: 1 lb

Best for: Handle-equipped blocks for dual tires.

Why it ranks #1: Its title specifies dual tires, and the listing confirms double-wheel and tandem-axle use; ten interlocking blocks add one inch each.

A twist-down T-handle lets the Camco FasTen blocks lock together for storage and provides a convenient way to carry them. The 10-pack is explicitly identified for dual tires, giving RV owners a stackable option that also accommodates several wheel and jack configurations.

Each block adds one inch to stack height, allowing you to adjust support in measured increments rather than choosing a fixed ramp height. Camco lists use with double wheels, tandem axles, hydraulic jacks, tongue jacks, stabilizer jacks, and fifth-wheel jacks. The integrated handle lifts for carrying and twists down to secure the blocks together for storage. Its quad-grid design is described as optimizing strength and weight, supporting a pack intended for repeated handling.

Skip it if you want included thinner top pieces for more refined stack increments; RVMATE’s 24-pack includes 0.75-inch top blocks.

This Camco set suits dual-tire RV owners who want incremental block height and a handle that secures the pieces for storage. The one-inch steps are straightforward, but buyers seeking thinner adjustments should note that limit.

Listed on Amazon as: Camco FasTen 4×2 RV Leveling Blocks for Dual Tires, Gray, 10 Pack, 44525

#2 · Best Dual-Axle Ramp

2. CARMTEK Camper Leveler

• Dimensions: 15 x 6 x 4 in
• Weight: 11.79 lb

Best for: Quick setup for double axles.

Why it ranks #2: Designed for dual-axle trailers, this curved two-pack includes wheel chocks and a stated anti-slip jointing system.

CARMTEK’s three-step leveling process starts by pushing the thin end beneath the tires, giving double-axle trailer owners a clear drive-on workflow. Its patented anti-slip jointing system links the leveler’s grip channels with the chock’s notches to help keep the chock from sliding while level.

The jointing system matches grip channels to chock notches according to the RV’s weight, with more channels lining up as weight increases. That connected interface addresses chock movement while the RV is level. The supplied setup guidance uses three steps: place the thin end tightly under the tires, drive onto the leveler, then use the chock. The product is identified for dual-axle trailers and tested up to 35,000 pounds, offering a ramp-and-chock workflow rather than separate block stacks.

Skip it if you want separate blocks for stacking under wheels and jacks; Camco FasTen 4×2 RV Leveling Blocks support both double tires and several jack types.

CARMTEK suits double-axle trailer owners who want a drive-on leveler with a linked chock and a defined three-step process. Its ramp-and-chock format differs from individual blocks for building support under jacks.

Listed on Amazon as: CARMTEK Camper Leveler 2-Pack Kit | Curved RV Levelers with Trailer Wheel Chocks for Dual Axle Trailers | Faster RV Leveling System Than RV Leveling Blocks | RV Accessories for Travel Trailers

#3 · Best Tandem Fit

3. OULEME Curved Levelers

• Weight: 8.07 lb

Best for: Curved ramps for tandem tires.

Why it ranks #3: The listing identifies tandem-wheeled RVs and tires up to 32 inches in diameter, with rubber anti-slip pads and leveling from 1/2 to 4 inches.

OULEME’s curved ramp levels any increment from one-half inch to four inches, giving tandem-trailer owners adjustable drive-on height without constructing a block stack. Its gear-mesh surface and two thickened rubber pads address slippage, while the product lists compatibility with tires up to 32 inches in diameter.

The compact curved levelers are identified for tandem-wheeled RVs and can be used for increments between 0.5 and 4 inches in under five minutes. HDPE construction is specified alongside a tire-weight limit of up to 35,000 pounds and a maximum diameter of 32 inches. For hard, slippery ground, the instructions place a rubber mat in front of or behind the wheel, then position the thin lip between tire and mat before driving up slowly.

Skip it if you need more than four inches of lift from a curved leveler; the OULEME 8PK offers stackable blocks for building a different-height setup.

This OULEME ramp suits tandem-trailer owners who want quick, incremental drive-on leveling and included anti-slip pads. Its listed range is one-half to four inches, so check that boundary against the lift your site requires.

Listed on Amazon as: OULEME 2 PK RV Leveling Block, Dual Axle Trailer Curved Leveler Ramp, Blue

#4 · Most Complete Kit

4. OFISPEED Ramp Kit

• Dimensions: 12.99"L x 9.06"W x 7.09"H

Best for: Ramp kit with mats and level.

Why it ranks #4: Its ramp kit includes two chocks, two anti-slip mats, a bubble level, and a carry bag, with a stated 35,000-pound load capacity.

This OFISPEED kit combines two levelers with two chocks, two anti-slip mats, a bubble level, and a carry bag, giving RV owners several setup pieces together. The gearwheel mesh and mats provide two stated measures against slipping while backing a camper tire onto the levelers.

OFISPEED lists a 35,000-pound capacity and polymer construction for the ramp-style levelers. The surface’s precise gearwheel mesh is intended to resist sliding as a tire backs onto the ramp, while the two anti-skid pads add another friction point. The included bubble level supports checking the setup, and the chocks provide additional wheel-control components. A carry bag keeps the listed kit pieces together for travel and campsite use.

Skip it if you want a 24-piece assortment for building custom stacks; RVMATE RV Leveling Blocks 24 Pack offers many individual interlocking blocks.

OFISPEED suits RV owners who want a ramp kit with mats, chocks, a bubble level, and a carry bag in one package. Its two-leveler format is a practical boundary if your dual-wheel setup calls for multiple stacked blocks.

Listed on Amazon as: RV Leveling Blocks Ramp Kit, 2 Packs Camper Leveler System for Travel with Two Chocks, 2 Anti-Slip Mats, 1T Bubble Level and Carry Bag, Up to 35000 LBS, Easier & Faster to Level Camper-Orange

#5

5. Camco FasTen 2×2 Blocks

• Dimensions: 10.5"L x 8.5"W
• Weight: 8 lb

Best for: Versatile blocks for wheels and jacks.

Why it ranks #5: The ten-block set is listed for double wheels and tandem axles, as well as several jack types; its instructions limit stacking to 4 1/2 inches.

Camco’s compatibility list covers single wheels, double wheels, tandem axles, and several jack types, making this 10-pack useful beyond wheel leveling alone. Its quad-grid design and integrated handle add practical support and carrying details to a straightforward stackable-block setup.

Each block measures 8.5 x 8.5 inches, and the quad-grid structure is specified for load-bearing stability. The blocks work with double wheels and tandem axles as well as hydraulic, tongue, stabilizer, and fifth-wheel jacks, giving one pack multiple support roles around an RV. Camco cautions against stacking higher than 4.5 inches, a useful boundary when planning the height. The integrated handle makes carrying and handling the blocks more direct at a campsite.

Skip it if you need a stated capacity of 35,000 pounds for curved ramps; OULEME’s 2 PK RV Leveling Block lists that tire-weight limit.

Camco suits RV owners who want stackable blocks for dual wheels and a range of jack types. Keep its 4.5-inch maximum stacking height in mind when deciding whether the pack provides enough lift for your campsite.

Listed on Amazon as: Camco FasTen RV Leveling Blocks – 8.5” x 8.5” x 1”- 10-Pk – Made in the USA

#6

6. Keltrion Interlocking Blocks

• Dimensions: 17.5 x 8.6 x 6.9 in
• Weight: 6.98 lb

Best for: Adjustable support for dual wheels.

Why it ranks #6: Its stacking layouts are described for single, dual, or all wheels, giving buyers multiple arrangements for wheel and jack leveling.

Multiple stacking layouts, including 6+6 and 3+3+3+3, let Keltrion’s 12 yellow blocks support single, dual, or all wheels. That flexibility also extends to wheel and jack use, making this set relevant to RV owners who want one assortment for different campsite support points.

The listed layouts let you distribute the 12 interlocking blocks in different groupings, including arrangements specifically identified for dual wheels. Keltrion also lists use under RV wheels, trailer jacks, and stabilizer jacks, so the same set can serve more than one support task. Its performance-polymer construction is described as durable for long-term outdoor use. The 17.5 x 8.6 x 6.9-inch product dimensions provide an overall storage reference for planning space in a trailer or tow vehicle.

Skip it if you require a stated load limit before choosing blocks; OULEME’s 2 PK curved leveler ramp specifies support for tires weighing up to 35,000 pounds.

Keltrion suits RV owners seeking a 12-piece set that can be rearranged for dual wheels, other wheel layouts, or jack support. Its listed details do not give a load-capacity figure, so that specification may matter to your decision.

Listed on Amazon as: 12-Pack RV Leveling Blocks, Heavy-Duty Interlocking, Yellow

#7

7. Kohree Curved Levelers

• Dimensions: 17.32 x 6.69 x 6 in
• Weight: 14.24 lb

Best for: Curved ramps with grip mats.

Why it ranks #7: The curved pair includes two blocks, two non-slip mats, and a bag, and the listing states a 35,000-pound capacity.

A stated 35,000-pound capacity anchors Kohree’s curved levelers, while two non-slip mats and an anti-skid bottom address movement during setup. The kit gives travel-trailer owners a ramp-style alternative to stacking individual leveling blocks, with a carrying bag for transport.

The curved levelers measure 17.32 x 6.69 x 6 inches, providing a defined ramp profile rather than separate stackable squares. Kohree lists support for up to 35,000 pounds and includes two blue blocks and two rubber mats to add friction around the leveling process. The stated installation time is under five minutes, which can simplify campsite setup; the included bag also keeps the levelers and mats together between trips.

Skip it if you want many individual blocks for custom stacks; RVMATE’s 24-pack offers a larger assortment for that approach.

Kohree suits travel-trailer owners who prefer curved levelers, included grip mats, and a stated under-five-minute setup. Consider its two-leveler format if your dual-wheel arrangement needs broader support than a single ramp can provide.

Listed on Amazon as: Kohree RV Leveling Blocks 6 Inch, 2 Packs Sturdy Camper Curved Levelers

#8

8. OULEME 8-Piece Blocks

Best for: Wide-base jack support kit.

Why it ranks #8: Six wide 17-by-8.5-inch blocks and two top covers suit flexible jack support, but the listing does not specifically identify dual-wheel use.

Six 17-inch-wide interlocking blocks give this OULEME kit its defining advantage: a broad base for supporting scissor jacks and resisting sinking into soft ground. Two smaller top covers complete the eight-piece set, giving RV owners components for a more tailored leveling setup.

The six 17 x 8.5 x 1.5-inch blocks stack together, so you can build up support to suit the campsite rather than rely on one fixed height. Their 17-inch width is specifically noted for scissor-jack stability and soft-ground support. The two 8.5-inch square top covers add separate pieces to the kit, while the included bag provides a way to carry the components together. HDPE construction with anti-UV additives is specified for outdoor durability.

Skip it if you need a curved ramp for driving onto tandem tires; OULEME’s 2 PK curved leveler ramp suits that setup better.

This kit suits RV owners who want wide stacked supports for scissor jacks, particularly on softer ground. Its six full-size blocks and two smaller top covers make the arrangement flexible, but it is not a curved drive-on ramp.

Listed on Amazon as: OULEME 8PK RV Leveling Blocks, 17.2"x8.5" Stackable Camper Trailer Levelers

#9

9. CircleRoad 12-Pack Blocks

• Weight: 8.82 lb

Best for: One-inch increments for custom leveling.

Why it ranks #9: The twelve interlocking blocks stack in a pyramid with each block adding one inch, but the listing does not specify dual-wheel compatibility.

CircleRoad’s interlocking blocks add one inch of height apiece, giving RV owners a simple way to build a pyramid stack to the level their campsite needs. The 12-pack offers individual pieces for a customizable setup rather than a fixed-height curved ramp.

The stated workflow is to stack the blocks into a pyramid, drive onto the stack, and add blocks to increase height by one inch per piece. That repeatable increment makes it easier to plan a desired lift before positioning the RV. CircleRoad describes the materials as sturdy and intended to withstand tremendous weight, but does not provide a specific capacity in the supplied details. The 12-piece format provides multiple blocks for building a customized stack.

Skip it if you need a stated 35,000-pound limit for a curved ramp; Kohree RV Leveling Blocks 6 Inch lists that capacity and includes non-slip mats.

CircleRoad suits RV owners who prefer pyramid stacks and predictable one-inch height increments over a curved ramp. Its 12-piece count supports custom arrangements, but buyers who require a numeric load limit will not find one in the supplied details.

Listed on Amazon as: CircleRoad RV Leveling Blocks 12 Pack Camper Trailer Leveling Blocks

#10 · Largest Block Set

10. RVMATE 24-Pack Blocks

• Weight: 18.66 lb

Best for: Large assortment for custom stacks.

Why it ranks #10: Its 24-piece set offers many interlocking blocks for adjustable setups, but the provided listing does not explicitly address dual wheels.

Twenty-four interlocking pieces make the RVMATE kit the largest stated assortment here, enabling RV owners to build stacks for uneven campsite ground. Standard blocks measure 8.5 inches square, and separate top blocks provide a thinner increment for a more adjustable setup.

Each main block measures 8.5 x 8.5 x 1.5 inches, while each top block measures 8.5 x 8.5 x 0.75 inches. That combination gives you both a standard stacking height and a thinner top piece when refining the level. RVMATE specifies high-density reinforced material and an interlocking design to support stability during leveling. With 24 pieces in the pack, the kit offers more individual components to distribute across a setup than a small set does.

Skip it if you need a compact curved drive-on leveler with mats; Kohree’s RV Leveling Blocks 6 Inch kit includes two mats and a carrying bag.

RVMATE fits RV owners who want a substantial supply of interlocking pieces to build stacks on uneven ground. Its 24-piece assortment and separate thinner top blocks offer flexibility, though carrying the 18.66-pound pack is a consideration.

Listed on Amazon as: RVMATE RV Leveling Blocks 24 Pack, Camper Trailer Leveling Blocks