Best Jacks For Trucks: Compare 10 Lifting Options

#1 · Best Overall

1. Powerbuilt 620471 UniJack

• Load Capacity: 6000 lb
• Material: Metallic-Fiber
• Compatible with Vehicle Type: Truck

Best for: Truck and unibody support.

Why it ranks #1: Listed for pickups and trucks, this 3,000-pound-capacity unit combines a bottle jack and ratcheting safety bar, with an 11-to-21-inch lift range.

A built-in ratcheting safety bar lets the Powerbuilt Unijack lift and hold a vehicle in one compact unit, combining bottle-jack lifting with jack-stand support. Its 11-to-21-inch range and wide base suit many pickups, SUVs, vans, and Jeeps, while the integrated lock keeps the raised position supported.

The combined jack-and-stand format avoids switching from a separate lifting jack to a stand during a lifting job; once raised, the ratcheting safety bar locks the unit in position. Its 3-ton capacity and 11-to-21-inch lift range cover many truck and SUV tasks, while the wide base adds stability for RV and off-road use. Powerbuilt also identifies it for unibody vehicles, where using factory-approved lifting points remains important to help prevent damage.

Skip it if you need a jack that slides under a low-clearance vehicle; the Jack Boss AS830011L starts at 3-15/16 inches.

Choose this for truck, SUV, van, or RV owners who want lifting and locked support in one unit. Its 11-inch minimum height makes it a poor match for vehicles with very low ground clearance.

Listed on Amazon as: Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound Capacity, All-in-One Car Lift, Heavy Duty Vehicle Unijack, Wide Base, 620471

#2 · Wide-Base Stand

2. Powerbuilt 640912 UniJack

• Load Capacity: 3 tons
• Material: Aluminum
• Compatible with Vehicle Type: Truck

Best for: RV and trailer stabilization.

Why it ranks #2: Designed for trucks, SUVs, RVs, and trailers, it pairs a 3-ton bottle jack with a locking ratcheting bar and an 11-to-21-inch range.

A built-in ratcheting safety bar combines lifting and locked support in the Powerbuilt 3-ton Unijack, eliminating the need to transfer the vehicle to a separate jack stand. Its 11-to-21-inch range and wide base suit truck, SUV, RV, and trailer use, including softer surfaces.

The integrated bottle jack and stand simplify the lift-to-support workflow: the ratcheting bar locks the unit in its raised position. A 3-ton rating and 11-to-21-inch lift range cover the listed truck, SUV, RV, and trailer use, while the wide base is intended to reduce sinking under load on softer surfaces and add stability. The compact unit measures 9.75 inches square at the base dimensions listed, making it easier to store than a larger floor jack.

Skip it if you need a floor jack that starts below 4 inches; the Jack Boss AS830011L has a 3-15/16-inch minimum.

This suits truck, SUV, RV, and trailer owners who want integrated lifting and support, especially on softer surfaces. It is not for sedans, and its 11-inch minimum height requires adequate clearance.

Listed on Amazon as: POWERBUILT 3 Ton All-in-One Hydraulic Bottle Jack and Jackstand in One, Compact, Wide Base, 11-21 Inch Range, Eliminates Jackstands, for Trucks, SUVs, RVs, Trailers, ASME, Not for Sedans – 640912

#3 · Off-Road Recovery

3. VEVOR 48-Inch Farm Jack

• Load Capacity: 7000 lb
• Material: Steel
• Compatible with Vehicle Type: Truck

Best for: Off-road and farm recovery.

Why it ranks #3: Its 7,000-pound capacity and 4.13-to-40.74-inch lift range suit trucks and off-road vehicles needing substantial travel.

A 48-inch lifting space and 7,000-pound capacity make the VEVOR farm jack suited to off-road and farm tasks requiring substantial reach. Its ratcheting mechanism adjusts height in 20-millimeter steps, and the 4.13-to-40.74-inch range extends beyond the working height of a conventional floor jack.

The long lift range supports lifting trucks and off-road vehicles from suitable points, while the ratcheting holes allow 20-millimeter height adjustments as the jack climbs. The 7,000-pound capacity also serves listed farm tasks such as lifting agricultural machinery and moving heavy objects like stumps or fence posts. Thickened steel construction supports strength, and hot-dip galvanized powder spraying provides the listed surface protection. This tall utility format serves a different workflow from low-profile garage floor jacks.

Skip it if you need a low-profile garage jack; the VEVOR S385 starts at 3.35 inches and is a floor-jack design.

Choose this for off-road truck owners and farm users needing long lifting travel for vehicles or listed farm tasks. Its tall ratcheting format is not the low-entry choice for vehicles with very limited clearance.

Listed on Amazon as: VEVOR Farm Jack 48 inch Utility High Lift, 7000 lbs Capacity Ratcheting Off Road Jeep Jack, Heavy for Tractor, Truck, SUV, Bumper Lift, Orange

#4 · Standard Truck Pick

4. AV Steel 3 Ton Floor Jack

• Load Capacity: 6000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: Standard pickup maintenance.

Why it ranks #4: Specifically listed for standard pickup trucks, it lifts up to 6,000 pounds from 5.5 to 18.5 inches; it excludes lifted and heavy-duty trucks.

A stated fit for standard pickup trucks, paired with a 3-ton capacity, makes the AV Steel floor jack a focused choice for routine truck lifting. Its 5.5-to-18.5-inch range covers a range of lift heights, while the single-piston hydraulic design keeps the operating setup straightforward.

The 6,000-pound rating and stated compatibility with standard pickup trucks, cars, SUVs, and minivans define the vehicle scope; the product is explicitly not suitable for lifted vehicles, heavy-duty trucks, or RVs. Its 5.5-inch minimum height sets the clearance needed to begin lifting, and the 18.5-inch maximum determines the upper reach. This is a single-piston model, not a dual-piston quick-lift design. For EVs, the listing recommends a jack-point adapter to align with manufacturer-specified lift points.

Skip it if you need dual-piston quick lifting or a lower entry height; the AV Steel AV-300102F starts at 3-1/8 inches.

Choose this for standard pickups and other listed vehicles needing a 3-ton floor jack for routine maintenance. It is not for lifted or heavy-duty trucks, or RVs; EV owners should note the adapter recommendation.

Listed on Amazon as: AV Steel 3 Ton Floor Jack (6000 lbs), Single Piston Steel Hydraulic Floor Jack, Lift Range 5.5" to 18.5", Fits Cars, SUVs & Standard Trucks – Not for Lifted Vehicles or Heavy-Duty Trucks

#5 · Lowest Entry

5. AV Steel Low Profile Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Low-profile truck garage work.

Why it ranks #5: The 3-ton floor jack has a 3-1/8-inch minimum height and 6,600-pound capacity, offering low entry for compatible vehicles.

A 3-1/8-inch minimum height lets the AV Steel low-profile jack reach under many low-riding vehicles, while its 19-7/8-inch maximum extends the usable lifting range. The 3-ton, 6,600-pound rating and dual-piston quick-lift pump make it suited to garage lifting where clearance and efficient raising matter.

The low entry height addresses limited ground clearance, and the 19-7/8-inch maximum gives more lift travel than a jack capped at a lower height. Its dual-piston quick-lift pump is intended to raise vehicles efficiently, reducing the pumping workflow compared with a single-piston arrangement. The 6,600-pound capacity is rated at 3 tons, and the 29-1/8-by-13-3/4-by-5-7/8-inch listed dimensions are useful when considering garage storage and access around the vehicle.

Skip it if you need a lighter jack to carry; the BIG RED T90413 bottle jack weighs 6.2 pounds.

This suits garage owners lifting low-clearance vehicles who want dual-piston operation and a broad height range. Its listed length is over 29 inches, so allow suitable floor space for storage and maneuvering.

Listed on Amazon as: AV Steel Low Profile Floor Jack 3 Ton (6600 lbs), Heavy Duty Hydraulic Jack for Car, Heavy-Duty Floor Jack with Dual Pistons Quick Lift Pump, Car Floor Jack with Lifting Range 3-1/8'' to 19-7/8''

#6

6. Jack Boss 3 Ton Floor Jack

• Load Capacity: 3 tons
• Material: Aluminum
• Compatible with Vehicle Type: Bus, Trailer

Best for: Low-clearance truck garages.

Why it ranks #6: Its 6,600-pound capacity and 3-15/16-inch minimum height cover SUVs and travel trailers, though truck compatibility is less explicit.

A 3-15/16-inch minimum height lets the Jack Boss low-profile floor jack slide beneath many low-clearance vehicles before raising them. Its 3-ton capacity and 18-5/16-inch maximum lift suit many SUVs, minivans, travel trailers, and other listed vehicle types, while dual pistons support quick-lift operation.

The low starting height helps when a conventional higher-entry jack cannot reach beneath a vehicle, and the 18-5/16-inch maximum provides useful lift range for service work. A dual-piston quick-lift pump can reduce pumping effort during raising, while the included two-piece handle is supplied for operation. The rubber saddle provides a contact surface at the lift point. At 58.5 pounds, this is a substantial floor jack to move and store, so consider its weight in a home garage.

Skip it if you need a lighter jack to carry between locations; the BIG RED T90413 bottle jack weighs 6.2 pounds.

This fits truck and SUV owners who want a low-entry floor jack for garage maintenance and value a dual-piston pump. Account for its 58.5-pound weight when planning to move or store it.

Listed on Amazon as: Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, 1.5X Overload Tested for Safety, Sport Utility Vehicle, Lifting Range 3-15/16" min to 18-5/16" max

#7

7. VEVOR 2.5 Ton Floor Jack

• Load Capacity: 2.5 tons
• Material: Steel
• Compatible with Vehicle Type: Truck

Best for: DIY truck and SUV lifting.

Why it ranks #7: Listed for trucks and SUVs, this steel floor jack has a 5,500-pound capacity and a 3.35-to-14.96-inch lift range.

An 85-millimeter minimum height lets the VEVOR S385 slide under many low-clearance vehicles, while its 2.5-ton capacity covers listed truck, SUV, and family-car lifting needs. The steel floor jack reaches 380 millimeters, giving home mechanics a low-profile option for tire, oil, and brake maintenance.

The 3.35-inch minimum height helps with vehicle access when clearance is limited, and the 14.96-inch maximum defines the available lifting range for service tasks. Its 5,500-pound capacity is lower than the 3-ton jacks in this roundup, so match it to the vehicle and lift requirements. The listing specifically names trucks and SUVs alongside family cars, making it a practical garage option for those vehicle types. Its steel construction is specified for the floor jack.

Skip it if you need a 3-ton rating; the Jack Boss AS830011L is rated for 6,600 pounds.

This fits DIY owners lifting family cars, trucks, or SUVs within its 5,500-pound rating and 14.96-inch reach. Confirm those limits suit the vehicle and service task before choosing this lower-capacity floor jack.

Listed on Amazon as: VEVOR 2.5 Ton Low Profile Heavy-Duty Steel Racing Floor Jack

#8

8. BIG RED 4 Ton Bottle Jack

• Load Capacity: 4 Ton
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Compact bottle-jack lifting.

Why it ranks #8: Its 8,000-pound capacity and wide base are useful specifications, but the listing identifies car compatibility rather than truck fit.

An 8,000-pound capacity in a bottle-jack format gives the BIG RED T90413 substantial rated lifting capacity in a compact package. Its wide, rugged base supports stability, while a 7-1/2-to-14-5/16-inch range and adjustable screw-top extension provide height adjustment for residential or commercial lifting tasks.

The welded bottle-jack design packs into a jack and storage case measuring 7.4 by 4.72 by 11.02 inches, making it practical to keep the included equipment together. Its 8,000-pound capacity is paired with a 7-1/2-inch minimum height and 14-5/16-inch maximum, and the adjustable screw top adds height adjustment within the setup. Drop-forged alloy steel and reinforced stress points support durability, while the wide base is intended to enhance stability.

Skip it if you need more than 14-5/16 inches of lift; the Powerbuilt 620471 reaches 21 inches.

This suits buyers wanting a compact bottle jack with a case for residential or commercial tasks. Its maximum height is 14-5/16 inches, so check that the available lift range suits the vehicle and job.

Listed on Amazon as: BIG RED 4 Ton (8,000 LBs) Hydraulic Welded Bottle Jack with Storage Case

#9

9. Maxority 3 Ton Floor Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Lowered-car workshop lifting.

Why it ranks #9: This 6,600-pound low-profile jack offers extended reach, but its listed compatible vehicle type is car rather than truck.

An extended reach paired with an ultra-low profile helps the Maxority floor jack access lowered vehicles and cars with aftermarket modifications. Its 3-ton capacity supports workshop lifting, and the dual-piston quick-lift pump is intended to raise vehicles efficiently, making this a low-clearance-oriented option for home maintenance.

The extended reach helps the jack reach farther under low-clearance vehicles, while its low-profile shape supports access where undercarriage clearance is limited. Those features make it relevant to lowered cars and vehicles with modifications, rather than a jack chosen only for maximum lift capacity. The 6,600-pound rating and dual-piston quick-lift pump support routine lifting workflow in a home or workshop. A pumping handle is included, so the listed operation has its handle supplied.

Skip it if you need a jack specifically rated for trucks; the VEVOR S385 lists truck compatibility and a 5,500-pound capacity.

Consider this for workshop owners lifting lowered cars or modified vehicles that need extended reach and a low profile. The supplied vehicle compatibility lists car, so truck owners should choose a model listing truck use.

Listed on Amazon as: Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)

#10

10. DNA Motoring 2 Ton Jack

• Load Capacity: 2 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Car-only garage service.

Why it ranks #10: The 4,000-pound capacity is limited for this roundup, and its listing specifically does not recommend it for pickups or trucks.

A 2-ton capacity and 5.1-inch minimum height make the DNA MOTORING trolley jack a garage option for cars that fit its stated limits. It lifts to 13 inches and includes overload protection, while its low-profile format is aimed at routine service rather than larger pickup trucks or oversized SUVs.

The 4,000-pound capacity sets a clear upper limit, and the listing recommends the jack for vehicles up to 2 tons; it specifically does not recommend it for pickups, trucks, or oversized SUVs. Its 5.1-to-13-inch lift range suits jobs within that reach, while overload protection is a stated safety feature. The trolley-style floor-jack format is intended for garage service, but buyers must keep the vehicle's weight and the jack's limited maximum height in view.

Skip it if you need a jack for a pickup; the VEVOR S385 lists truck compatibility and a 5,500-pound capacity.

Use this for garage service on cars that stay within its 2-ton capacity and 13-inch maximum height. Pickup, truck, and oversized-SUV owners should choose a model whose listing supports those vehicles.

Listed on Amazon as: DNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley Service/Floor Jack, 2 Ton (4000 lbs) Capacity, Lifting Range 5.1"-13", Black