Best Handlebars For Fatboy: Compare Rise, Shape, and Fit

#1 · Best Overall

1. A-Premium 12 inch Handlebars

• Material: Iron
• Material Type: Iron

Best for: Twelve-inch Fatboy fitment.

Why it ranks #1: The fitment list explicitly names Fatboy 1990–2017 and Fatboy Lo 2010–2017, and the 12-inch rise suits riders seeking a taller position.

A-Premium specifically lists Fatboy models from 1990 through 2017 among this handlebar’s compatible applications, giving owners in that range a concrete fitment starting point. Its 12-inch height provides a notably raised bar profile, while the black iron construction offers a dark-finish alternative.

The stated 12-inch rise is the main ergonomic consideration: compare it with your current bar and cable routing before choosing a taller position. A-Premium names Fatboy and Fatboy Lo model years 1990–2017, alongside other Harley-Davidson applications, so buyers can check the listed range against their motorcycle. The supplied information identifies iron construction and black color, but gives no width, pullback, or clamp diameter; those missing dimensions make a measurement check especially relevant before installation.

Skip it if you need published width and pullback dimensions; AIRCMT’s 10-inch bar lists both for comparing cockpit reach.

This is a candidate for Fatboy and Fatboy Lo owners whose model years fall within the stated ranges and who want a 12-inch bar. Buyers needing exact reach or clamp measurements should resolve those fit details before selecting it.

Listed on Amazon as: A-Premium 12 inch Handlebars, Compatible with Harley-Davidson

#2 · Best Fat Bar

2. TCMT 14-Inch Ape Hangers

• Material: Iron
• Material Type: Iron
• Dimensions: 34.5"L x 14"W

Best for: Fourteen-inch swept ape-hanger.

Why it ranks #2: Listed for Harley FLST and FXST models including Fat Boy, these black 1-1/4-inch bars rise 14 inches and taper to fit standard 1-inch controls.

A 14-inch rise paired with a 71⁄2-inch backward sweep gives this TCMT bar a distinctly raised, swept-back position. Its 11⁄4-inch diameter tapers to 1 inch at the center section and tips, allowing standard handlebar controls to fit while retaining the larger center profile.

The 341⁄2-inch tip-to-tip width and 71⁄2-inch backward sweep help buyers assess cockpit span and reach before installation. TCMT lists FLST, FXST, Sportster XL, and throttle-by-wire models, with Fat Boy included in the title, offering a useful stated fitment reference. The iron bar’s center section and tips taper from 11⁄4 inches to 1 inch for standard controls. Compare those dimensions with your existing setup, especially the tall 14-inch rise and cable routing needs.

Skip it if you prefer a narrower 25.2-inch bar; YITOPT’s 10-inch round ape hanger lists that total width.

This TCMT option fits riders seeking a wide, 14-inch swept ape-hanger and the listed Harley family applications. Its 341⁄2-inch width and 71⁄2-inch sweep are important boundaries to compare with your cockpit and desired hand position.

Listed on Amazon as: TCMT Fat 1.25" Ape Hanger Bars 14" Rise Handlebar Fits For Harley FLST FXST Softail Slim Heritage Fat Boy Deluxe Deuce Sportster XL 883 1200 Dyna Super Wide Glide Low Rider Fat Bob Custom Application

#3 · Highest Rise

3. TCMT 16-Inch Ape Hangers

• Material: Iron
• Material Type: Iron

Best for: Tall ape-hanger throttle-by-wire fit.

Why it ranks #3: The listing names Fat Boy among its Softail fitments; its 16-inch rise and 1-1/4-inch center section suit riders seeking a particularly tall ape-hanger profile.

The 16-inch rise is this TCMT ape hanger’s defining dimension, creating a substantially taller bar profile for riders seeking that configuration. Its 11⁄4-inch center tapers to 1 inch at the controls, and the listed fitment explicitly includes throttle-by-wire models among several Harley-Davidson families.

The center section’s 11⁄4-inch diameter tapers to 1 inch so standard handlebar controls can fit, connecting the stout center profile with familiar control sizing. TCMT lists compatibility with FLST, FXST, Sportster XL, throttle-by-wire models, and custom applications, giving Fat Boy owners a stated family fitment to evaluate. The 16-inch rise and chrome iron construction define the visual and material choice; check routing and position against your specific setup before replacing the bar.

Skip it if you want a 14-inch rise instead; TCMT’s Fat 1.25-inch bar specifies that height and a 7.5-inch backward sweep.

Choose this TCMT bar if you want a chrome, 16-inch ape-hanger profile and need the stated throttle-by-wire compatibility. Its tall rise is the key boundary; compare that position with your preferred hand placement and motorcycle setup.

Listed on Amazon as: TCMT 16" Rise APE Hangers Bar 1-1/4" Fat Handlebars Fit For Harley Softail Slim Heritage Fat Boy Deluxe Deuce Sportster XL 883 1200 Dyna Super Glide Wide Glide Low Rider Fat Bob Custom Application

#4 · Best Detailed Fit

4. YITOPT 10-Inch Ape Hangers

• Material: Alloy Steel
• Material Type: Alloy Steel
• Dimensions: 25.5"L x 25.5"W

Best for: Internal-routing compact ape hanger.

Why it ranks #4: Fat Boy appears in the fitment list, and the listing provides a 10-inch rise, 1-inch diameter, 25.2-inch width, and 8.9-inch pullback.

Three round holes and two oval slots let this YITOPT bar route throttle cables, brake lines, and clutch cables internally, giving wiring-conscious builders a specific routing feature. The 10-inch rise, 25.2-inch width, and 8.9-inch pullback define its compact-width ape-hanger dimensions.

A 1-inch outer diameter fits standard 1-inch riser clamps, while the 5.91-inch center width and 25.2-inch total width help establish whether its mounting span and bar reach suit the motorcycle. YITOPT lists a range of Harley Sportster, Dyna, and Softail models, including Fat Boy. The alloy-steel construction has a gloss-black corrosion-resistant finish, and the pre-drilled holes and slots support internal cable routing. Compare the 8.9-inch pullback with your current position before installation.

Skip it if you want a 28-inch overall width; AIRCMT’s 10-inch-rise bar lists that span and a 9.5-inch pullback.

This YITOPT bar suits Fat Boy and other listed Harley owners prioritizing internal cable routing in a 10-inch-rise profile. Its 25.2-inch width and 8.9-inch pullback are essential fit considerations for planning reach and cockpit layout.

Listed on Amazon as: 10" Rise 1" Round Ape Hanger Handlebars Fit Harley Street Bob Sportster XL 883 1200 Fat Boy Softail Dyna| Shadow|Volusia|Drag Star Road Star|Vulcan(Gloss Black, 10 Inch)

#5

5. AIRCMT 10-Inch Handlebar

• Material: Carbon Steel, Iron
• Material Type: Carbon Steel, Iron
• Dimensions: 28"L x 10"W

Best for: Chrome moderate-rise cruiser setup.

Why it ranks #5: The listing names Fatboy-compatible Softail applications and specifies a 10-inch rise, 28-inch width, 9.5-inch pullback, and 1-inch clamp diameter.

The 10-inch rise paired with a 9.5-inch pullback gives this AIRCMT bar a defined cruising position, while its 28-inch width keeps the overall layout specified. Its chrome-plated, 1-inch carbon-steel construction makes it a candidate for riders seeking a raised handlebar with a polished finish.

A 1-inch clamp area and 1-inch diameter align with standard 1-inch riser mounts, and the bar is pre-drilled for routing. The 10-inch rise and 9.5-inch pullback are useful dimensions to compare against your preferred reach and existing cable layout before installation. AIRCMT lists compatibility with Harley Softail, Sportster, Dyna, Street Bob, and Low Rider models, including Fatboy in the title; it is not notched for throttle-by-wire systems, a key fit limitation.

Skip it if you need a throttle-by-wire notch; TCMT’s 16-inch bar explicitly lists throttle-by-wire fitment.

A cruiser rider wanting a chrome, 10-inch-rise bar can consider this AIRCMT option for a listed Fatboy application. Check the 1-inch riser clamp and note that throttle-by-wire systems are not accommodated by its stated notch configuration.

Listed on Amazon as: 10 Inches Rise 1'' HandleBar Fits for Harley Sportster 883 1200 48 Dyna Fatboy Street Bob Softail Low Rider Chrome

#6

6. CELOMT 8-Inch Z Bar

• Material: Alloy Steel
• Material Type: Alloy Steel
• Dimensions: 28"L x 11"W

Best for: Compact-rise chrome Z-bar.

Why it ranks #6: Its fitment includes Harley Softail models and the title names Fat Boy; the chrome 1-inch bar has an 8-inch rise, 28-inch width, and 4.2-inch pullback.

An 8-inch rise and 4.2-inch pullback give this CELOMT Z-bar a more compact stated position than taller ape-hanger options. The 28-inch-wide, 1-inch-diameter alloy-steel bar carries a triple-polished copper, nickel, and chrome plating for riders seeking a chrome Z-bar profile.

The 4.2-inch pullback and 8-inch rise provide concrete dimensions for comparing hand position and reach before installation, while the 28-inch width defines the bar’s overall span. Its 1-inch diameter is listed for Harley Softail and Sportster XL fitment, and the seller also names several non-Harley motorcycle families. Because clamp diameter matters to installation, check the riser clamp measurement against the stated 1-inch bar diameter rather than relying on model name alone.

Skip it if you want a 10-inch rise and greater listed pullback; AIRCMT’s 10-inch bar specifies 9.5 inches of pullback.

This suits riders seeking a chrome Z-bar with a moderate 8-inch rise and listed Softail or Sportster XL fitment. Confirm the 1-inch riser clamp and consider whether its 4.2-inch pullback matches your preferred reach.

Listed on Amazon as: 8'' Rise 1'' HandleBars Z bar Ape Hanger Fit Harley Street Bob Sportster XL 883 1200 Fat Boy Shadow Intruder Vulcan Road Star Drag Star Volusia Custom Application Chrome

#7

7. CELOMT 6-Inch T Bar

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Six-inch-rise two-inch T-bar.

Why it ranks #7: The listing expressly includes Fat Boy and gives a 6-inch height, 33-inch width, 1-inch grip diameter, and 2-inch bar diameter.

A two-inch T-bar diameter paired with a one-inch grip diameter distinguishes this CELOMT handlebar from conventional one-inch bars. Its 6-inch height, 33-inch width, and pre-drilled construction give Fat Boy and other listed Harley owners defined dimensions for a lower T-bar setup.

The 33-inch width establishes a broad span, while the 3.5-inch center-to-center measurement describes the mounting spacing to compare with the motorcycle’s setup. CELOMT lists Fat Boy, Fat Bob, Softail, Dyna, Breakout, and additional Harley models, with a 6-inch overall height. Pre-drilled construction supports routing through the bar, and alloy steel with a gloss-black finish specifies its material and appearance. Confirm the 2-inch bar mounting arrangement and 3.5-inch spacing before installation.

Skip it if you need a one-inch-diameter handlebar; THRASHIN’s TSC-2706-3 lists a one-inch size and throttle-by-wire keyholes.

This is for a Fat Boy or other listed Harley owner seeking a 6-inch T-bar with a gloss-black finish. Its two-inch diameter and 3.5-inch center spacing are critical fit boundaries, so check the mounting arrangement first.

Listed on Amazon as: 6'' Rise 2'' T Bar Handlebars Motorcycle Custom Handlebar Fit Harley Softail Dyna Breakout Fat Boy Fat Bob FXSB FLSTC FLSTN FLSTFB FLS

#8

8. Wsays 14-Inch T-Bar

• Material: Alloy Steel
• Material Type: Alloy Steel
• Dimensions: 31"L x 14"W

Best for: Fourteen-inch black T-bar setup.

Why it ranks #8: Fitment names Softail Heritage and Dyna Fat Bob rather than Fatboy specifically; its 14-inch rise and steel construction make exact model verification important.

The 14-inch rise and T-bar format define Wsays’ tall handlebar layout, while its 11⁄4-inch diameter distinguishes it from standard one-inch bars. The gloss-black, powder-coated alloy-steel construction adds a stated rust-proof finish, and the listed applications include Dyna Fat Bob, Softail Heritage, Sportster, and Touring Road King models.

Wsays lists a 31-inch length and 14-inch width, giving buyers dimensions to compare with their preferred cockpit span and storage or handling constraints. Its 11⁄4-inch diameter and T-bar style are the central fit considerations, so check the mounting arrangement on the specific motorcycle before installation. The stated compatibility covers Dyna Fat Bob, Softail Heritage, Sportster 883/1000/1100/1200, Super Glide, and Touring Road King models from 1996–2024. A gloss-black powder coat completes the finish specification.

Skip it if you need a standard 1-inch bar; AIRCMT’s 10-inch handlebar specifies a 1-inch clamp area and diameter.

This suits riders whose motorcycle falls within Wsays’ listed applications and who want a tall, black T-bar. The 11⁄4-inch diameter is a key boundary: verify the mounting setup and compare the stated dimensions with your cockpit.

Listed on Amazon as: Wsays 14" Rise T-Bar Handlebar Drag 1-1/4" Diameter Fit for Harley

#9

9. Thrashin Aggressive Mid Bend

• Dimensions: 31.5"L x 4"W

Best for: Throttle-by-wire mid-bend bars.

Why it ranks #9: The 1-inch chrome bar has a 4-inch end rise, 5-inch pullback, and internal-wire slots, but the supplied fitment information does not name Fatboy.

Throttle-by-wire keyholes make this THRASHIN one-inch handlebar a specific option for late-style bike fitments, while its drilled and slotted construction supports internal wiring. The chrome bar has a 4-inch end rise, 5-inch pullback, and 311⁄2-inch width for evaluating its mid-bend position.

Knurled clamping areas are stated to maximize clamp grip, helping keep the bar’s mounting interface secure when installed with compatible hardware. The 1-inch size and throttle-by-wire keyholes address control fitment, while the drilled and slotted design provides a route for internal wiring. Its 311⁄2-inch width, 4-inch end rise, and 5-inch pullback offer useful cockpit dimensions to compare with a Fat Boy setup. The supplied facts do not identify specific Fat Boy model years, so check application details before choosing it.

Skip it if you need Fat Boy model-year fitment explicitly listed; A-Premium names Fatboy applications from 1990 through 2017.

This suits riders needing a one-inch chrome mid-bend bar with internal wiring provisions and throttle-by-wire keyholes. For a Fat Boy installation, verify the specific application because the supplied details give no model-year fitment range.

Listed on Amazon as: Thrashin Supply Co TSC-2706-3 1in. Handlebar – Aggresive Mid Bend – Chrome

#10

10. Thrashin Mid Bend Stainless

Best for: Stainless internal-wiring mid bend.

Why it ranks #10: This 1-inch stainless bar has a stated 4-inch rise, but its 25-inch pullback specification is unusual and the listing does not establish Fatboy fitment.

Stainless-steel construction and a drilled, slotted design for internal wiring define this THRASHIN mid-bend bar. It has a one-inch size, 31-inch width, and four-inch rise; throttle-by-wire keyholes are also listed for late-style bike fitments, subject to the specific motorcycle application.

The 31-inch width and four-inch rise give buyers two stated dimensions for comparing bar span and hand position with their current setup. Knurled areas are specified for maximum clamp grip, while drilled slots support internal wiring and throttle-by-wire keyholes address late-style fitments. The stainless-steel finish separates it from chrome and black alternatives. The supplied details do not list a Fat Boy model-year range, and the stated 25-inch pullback deserves careful comparison with the desired reach before purchase.

Skip it if you need a stated Fat Boy fitment range; A-Premium lists Fatboy compatibility for 1990–2017.

This THRASHIN bar may suit a rider seeking stainless construction, internal wiring provisions, and late-style throttle-by-wire keyholes. Its listed 25-inch pullback and unspecified Fat Boy model-year fitment are important boundaries to resolve.

Listed on Amazon as: Mid Bend Bars – Stainless