Best Motorcycle Scissor Jack for Garage Maintenance

#1 · Best Overall

1. VIVOHOME 1100 LBS Scissor Jack

• Dimensions: 14.6 x 9 x 3.5 in
• Weight: 12.5 kg
• Load Capacity: 1100 lb
• Material: Alloy Steel

Best for: Wide-deck garage maintenance.

Why it ranks #1: Its wide anti-slip platform, alloy-steel build, 1,100-pound capacity, and 3.5-to-14.5-inch range suit a broad range of motorcycle maintenance.

A 3.5-to-14.5-inch lifting range gives the VIVOHOME jack useful adjustment for engine, transmission, and wheel work. Its wide anti-slip platform and 1,100-pound capacity support a broad range of motorcycle lifting tasks, while adjustable screw adapters help balance the stand on uneven floors.

The reinforced crank handle provides manual control for raising and lowering, so you can adjust height during maintenance without needing a powered lifting system. Its 3.5-to-14.5-inch range accommodates several service positions, and the 1,100-pound rating covers motorcycles and snowmobiles, as specified. The wide anti-slip platform gives the bike a more secure contact surface, while adjustable screw adapters help compensate for uneven flooring. The steel jack measures 14.6 by 9 by 3.5 inches, a compact footprint for garage storage.

Skip it if you need a foot-operated lift table with casters; VEVOR’s 1500-pound hydraulic lift includes both.

This suits a home mechanic lifting a motorcycle or snowmobile for wheel, engine, or transmission service. Consider the specified load limit and manual crank operation, and make sure the wide platform and lifting range suit your maintenance setup.

Listed on Amazon as: VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack, Wide Deck Hoist Stand, Red

#2 · Safety Pin Pick

2. VEVOR 1100 LBS Scissor Lift

• Dimensions: 18.1 x 11 x 3.9 in
• Weight: 26 lb
• Load Capacity: 1100 lb
• Material: Steel

Best for: Manual street-bike lifting.

Why it ranks #2: This dedicated manual scissor jack supports 1,100 pounds, lifts from 3.7 to 13.8 inches, and lists a safety pin.

A 1,100-pound capacity paired with a 3.7-to-13.8-inch lift range makes this VEVOR scissor jack a practical center-lift option for street, cruiser, and touring motorcycles. Its wide deck provides a broad support surface, and the included safety pin adds a securing step during raised maintenance.

The manual crank operation avoids the need for extra lifting tools, letting you raise a compatible bike directly in the garage. Its stated capacity is 1,100 pounds, with named compatibility for street bikes, cruisers, and touring motorcycles, giving those owners a clear scope for use. The 3.7-to-13.8-inch range supports different working heights, while the wide deck offers a broad contact area. A safety pin provides an additional securing measure once the bike is raised; the listed design has no casters.

Skip it if you need casters and hydraulic foot operation; VEVOR’s 1500-pound hydraulic lift has wheels and a foot-operated design.

Choose this for manual garage maintenance on a street bike, cruiser, or touring motorcycle within its stated capacity. Its lifting range and safety pin suit stationary service, but the no-caster design is a boundary if you need to roll the lift.

Listed on Amazon as: VEVOR Motorcycle Lift, 1100 LBS Motorcycle Scissor Lift Jack with Wide Deck & Safety Pin, 3.7"-13.8" Center Hoist Crank Stand, Steel Scissor Jack for Street Bikes, Cruiser Bikes, Touring Motorcycles

#3 · Included Tool Kit

3. OMT 1100lb Scissor Lift

• Dimensions: 1.57 x 10.24 x 4.33 in
• Weight: 12.8 kg
• Load Capacity: 1100 lb.
• Material: Rubber, Steel

Best for: Socket-or-handle control.

Why it ranks #3: The 1,100-pound jack lifts from 3.7 to 14.6 inches and includes a safety bar, T-handle, 3/8-inch socket, chain brush, and gloves.

The OMT jack can be raised with either its T-handle or a 3/8-inch socket and ratchet, giving motorcycle owners two manual ways to adjust working height. Its 3.7-to-14.6-inch range and 1,100-pound capacity support maintenance on cruisers, dirt bikes, and other motorcycles.

Switching between the included T-handle and a 3/8-inch socket with ratchet lets you choose the manual control that suits your workspace. The jack lifts from 3.7 to 14.6 inches, so the same stand can provide different access heights for motorcycle repairs. Its 1,100-pound rating covers the motorcycles named by the manufacturer, including cruisers and dirt bikes. The package also includes a safety bar, gloves, and a chain brush, useful additions for a maintenance session. Manual operation is recommended to limit screw wear.

Skip it if you want powered lifting rather than manual screw operation; VEVOR’s hydraulic lift uses foot operation.

This fits motorcycle owners who value a choice of T-handle or ratchet control and want a broad adjustment range for repairs. Keep operation manual as recommended, and consider the included safety bar when planning raised-bike work.

Listed on Amazon as: OMT 1100lb Motorcycle Scissor Lift Jack Wide Deck Motorbike Hoist Stand

#4 · Two-Mode Platform

4. DNA Motoring 2-in-1 Jack

• Weight: 14.7 kg
• Load Capacity: 1100 lb
• Material: Rubber, Steel

Best for: Two-contact motorcycle support.

Why it ranks #4: Its 1,100-pound capacity and 3.7-to-14.8-inch range combine curved holders with a rubber-mat wide-deck mode for motorcycle support.

Two curved holders and a thickened rubber mat give the DNA Motoring jack two support configurations for motorcycle lifting. Its 1,100-pound capacity and 3.7-to-14.8-inch range cover a broad set of working heights, while the curved holders are specified to grip more tightly and help prevent slippage.

Use the two curved holders for a more closely fitted motorcycle contact, or use the included rubber mat as a wide-deck base; that two-in-one setup offers a choice of support surface. The jack lifts from 3.7 to 14.8 inches and is rated for 1,100 pounds, setting clear limits for vehicle and service planning. Heavy-duty steel with a powder-coated finish forms the structure, while the rubber pads are described as anti-slip. The listed compatible vehicle type is motorcycle.

Skip it if you need a jack listed for ATVs or UTVs; VIVOHOME’s VH326 names both vehicle types.

This suits motorcycle owners who want to switch between curved holders and a rubber-mat wide deck for maintenance. Its 1,100-pound rating and 3.7-to-14.8-inch range define the limits, and the compatibility listing names motorcycles only.

Listed on Amazon as: DNA Motoring Steel Motorcycle ATV Scissor Lift Jack Hoist Stand with Saddle & Rubber Pad, 2-in-1, 1100lbs (500KG) 3.7-14.8" Lifting Range, TOOLS-00290

#5

5. Extreme Max Wide Scissor Jack

• Dimensions: 18 x 10 x 4 in
• Weight: 12.39 kg
• Load Capacity: 1000 lb
• Material: Alloy Steel

Best for: Rubber-padded manual center lift.

Why it ranks #5: The wide rubber-padded platform and 14-inch maximum height fit motorcycle maintenance, though specifications list a 1,000-pound capacity.

A rubber-padded 151⁄8-by-9-inch platform gives the Extreme Max a broad, cushioned contact area for motorcycle maintenance. The hand-operated scissor jack extends to 14 inches and uses a 7/8-inch wrench or socket, making it a straightforward option for stationary center-lift work.

The wide platform’s rubber padding helps protect the motorcycle’s contact surface from scratching while holding it during maintenance. Its center-lift design extends to 14 inches, providing working clearance within that stated range. Operation uses a 7/8-inch socket or wrench, so setup calls for a separate hand tool rather than an integrated crank. The steel frame and 1,000-pound listed capacity define its load boundary. The manufacturer explicitly says it will not lift trikes, and warns against using an impact wrench or powered drill.

Skip it if you need to lift a trike; this model is explicitly not suitable for trikes.

This is for motorcycle owners seeking a wide, rubber-padded platform for hand-operated maintenance. Its 14-inch extension and 1,000-pound listed capacity set the working limits; it is not a trike lift, and requires a separate 7/8-inch tool.

Listed on Amazon as: Extreme Max 5001.5044 1100 lb. Motorcycle Scissors Jack – Wide

#6 · Aluminum Construction

6. SOARSHARK Aluminum Scissor Jack

• Dimensions: 16.5 x 9 x 3.9 in
• Weight: 16 lb
• Load Capacity: 1100 lb
• Material: Aluminum, Carbon Steel

Best for: Reinforced lightweight-alloy lift.

Why it ranks #6: This 1,100-pound scissor lift uses aluminum and carbon steel and includes a T-handle and 3/8-inch drive socket.

Two extra reinforcing shafts and deep-step shaft design are specified to reduce movement and increase clamping force during lifting. The SOARSHARK’s aluminum and carbon-steel construction keeps its listed weight to 16 pounds, while its 1,100-pound capacity covers motorcycles and several other vehicle types.

The reinforced shafts secure the four scissor arms, and the deep-step shaft design is intended to improve clamping force; together, these features target stability while the bike is raised. Aluminum and carbon steel make up the listed construction, and the jack weighs 16 pounds, a useful handling consideration when positioning it. Its 1,100-pound rating and compatibility listing cover motorcycles, ATVs, snowmobiles, and UTVs. The supplied components include a 3/8-inch drive socket, T-handle, and chain brush for manual maintenance tasks.

Skip it if you need a documented lifting-height range before choosing; VEVOR’s M110201 lists 3.7 to 13.8 inches.

This suits buyers prioritizing reinforced scissor structure and a 16-pound listed weight across motorcycles, ATVs, snowmobiles, or UTVs. The 1,100-pound capacity is stated, but no lifting-height range is supplied for planning clearance.

Listed on Amazon as: Aluminum Motorcycle Scissor Lift Jack, 1100LBS Heavy Duty (Black)

#7

7. VIVOHOME 1100 LBS Center Jack

• Dimensions: 19 x 6 x 16 in
• Weight: 30 lb
• Load Capacity: 1100 lbs
• Material: Carbon Steel

Best for: Stable pin-secured center lift.

Why it ranks #7: It supports 1,100 pounds and lists safety pins and stabilizing side wings, but its center-jack format is less compact than a basic deck jack.

Wing extensions on both sides of the base and included safety pins give the VIVOHOME VH326 specific stability and securing features for motorcycle maintenance. Its 1,100-pound capacity, rubber top pad, and compatibility listing for ATVs, motorcycles, snowmobiles, and UTVs broaden its stated use.

The three-inch wings on each side strengthen the base, while safety pins provide an additional securing feature when the stand is raised. A striped rubber pad covers the top surface to help prevent slipping, and the powder-coated steel structure is described as oil-, grease-, and rust-resistant for easier cleanup after repairs. With a 1,100-pound capacity and listed compatibility across motorcycles, ATVs, snowmobiles, and UTVs, the VH326 serves several vehicle types. Its 30-pound weight is worth considering for repositioning.

Skip it if you need a lighter VIVOHOME jack; the VH012 is listed at 12.5 kilograms, while this model weighs 30 pounds.

This fits owners seeking a center lift with base wings and safety pins for motorcycle or listed powersports maintenance. Its 1,100-pound capacity and rubber top pad suit that role, while the 30-pound weight affects handling.

Listed on Amazon as: VIVOHOME Motorcycle Lift 1100 LBS Center Scissor Lift Jack

#8

8. Black Widow Steel Tire Jack

• Weight: 32 lb
• Load Capacity: 1100 lb
• Material: Steel

Best for: Extended tire-lift range.

Why it ranks #8: The steel jack supports 1,100 pounds and reaches 16.25 inches with removable adapters, although its tire-jack format differs from a typical wide-deck scissor jack.

A 3.75-to-16.25-inch lift range gives the Black Widow jack a taller stated reach than many compact center stands. Removable adapters add another 2 to 3.25 inches of height, helping motorcycle owners adjust the support for front- or rear-tire work within the jack’s 1,100-pound capacity.

The removable adapters let you add 2 to 3.25 inches when the base lifting range is not enough for the intended tire service. At 3.75 to 16.25 inches, the jack covers a broad range of lifting positions, and its 1,100-pound rating supports front or rear tire lifting on most motorcycle models, as described. Rubber-padded lift surfaces help prevent slipping at the contact points. Heavy-duty steel with a black powder-coated finish is specified for strength and resistance to rust and wear.

Skip it if you want a lighter 12.5-kilogram compact jack; VIVOHOME’s VH012 is listed at that weight.

This suits motorcycle owners who need extra height for front- or rear-tire work and value removable adapters. Its 1,100-pound capacity and rubber-padded surfaces support that role, but account for the listed 32-pound weight when moving it.

Listed on Amazon as: Black Widow Steel Motorcycle Tire Jack, 3.75 to 16.25 In Lift, 1,100 lb

#9

9. VEVOR 1500 LBS Hydraulic Lift

• Dimensions: 33.1 x 16.1 x 4.7 in
• Weight: 58 lb
• Load Capacity: 1500 lb
• Material: Steel

Best for: Hydraulic rolling lift table.

Why it ranks #9: Its 1,500-pound capacity exceeds the manual options, but the 58-pound hydraulic table with wheels is a different, bulkier lift format.

Foot-operated hydraulics and four wheels turn this VEVOR into a rolling lift table rather than a hand-cranked scissor jack. Its 1,500-pound capacity and listed compatibility with motorcycles, ATVs, powersports vehicles, and UTVs make it an option for buyers who need a mobile, higher-capacity service platform.

The foot-operated design lets you raise the platform without turning a manual screw, while the four wheels make it possible to reposition the lift around a workspace. A 1,500-pound capacity is specified for standard motorcycles, touring bikes, cruisers, ATVs, and other models. The included two ratchet belts offer a way to secure a vehicle during lifting. At 58 pounds and 33.1 by 16.1 by 4.7 inches, it takes more space and handling effort than a compact jack.

Skip it if you need a compact, 12.5-kilogram manual jack; VIVOHOME’s VH012 is much lighter by listed weight.

Choose this for garage users who want foot-operated lifting, casters, and a 1,500-pound capacity across listed powersports vehicles. Its 58-pound weight and larger table format call for adequate storage and room to position it.

Listed on Amazon as: VEVOR Hydraulic Motorcycle Lift Jack 1500 LBS Capacity ATV Scissor Lift Jack Portable Motorcycle Lift Table with 4 Wheels Hydraulic Foot-Operated Hoist Stand for Motorcycle ATV UTV Powersports

#10

10. SHMQYSY 1500 LBS Floor Jack

• Dimensions: 16.93 x 5.24 x 10.55 in
• Weight: 34.2 lb
• Load Capacity: 1500 lb
• Material: Carbon Steel

Best for: Heavy motorcycle lifting.

Why it ranks #10: Although rated for 1,500 pounds and fitted with thick rubber pads, its listed floor-jack style is not a motorcycle scissor jack.

A 1,500-pound capacity gives the SHMQYSY jack a higher stated load limit than the 1,100-pound models in this lineup. Its upgraded bearing is intended to reduce friction during lifting, while thick 0.48-inch top rubber padding and anti-slip bottom pads address contact with both motorcycle and floor.

The upgraded bearing is described as reducing friction, which can make raising a heavy motorcycle require less effort. With a stated 1,500-pound capacity, the jack is aimed at loads beyond the rating of the 1,100-pound alternatives. A 0.48-inch top rubber pad helps prevent scratches and provides a padded support surface; anti-slip rubber pads underneath protect the floor and help resist movement. Its carbon-steel construction and 34.2-pound weight are relevant when deciding where to position and store this floor-style stand.

Skip it if you need a jack explicitly listed for ATVs and UTVs; VEVOR’s 1500-pound hydraulic lift names both.

This is suited to motorcycle owners seeking a higher stated capacity and padded contact on top and bottom. Its 34.2-pound weight and motorcycle-only listed compatibility are important boundaries when choosing a location and vehicle.

Listed on Amazon as: 1500 LBS Motorcycle Jack, Thickened 0.48" Rubber Pad Motorcycle Stand Lift, Upgraded Labor-Saving Bearing, Steel Motorcycle Center Stand with Carrying Handle and Anti-Slip Bottom for Heavy ATV