Best Stainless Steel Propeller for Different Outboard Setups

#1 · Best Overall

1. SOLAS HR Titan 3

Best for: Midrange speed and stern lift.

Why it ranks #1: Its 13-7/8-inch diameter, 19-inch pitch, and right-hand rotation are specified, alongside listed thrust, acceleration, stern-lift, and mid-range economy benefits.

Solas pairs a 19-inch pitch with a 13-7/8-inch diameter and highlights stern lift and acceleration, making this three-blade propeller a candidate for buyers seeking stronger pickup and midrange speed. Its stated benefits also include smooth performance and improved midrange economy, while right-hand rotation defines its operating orientation.

The 19-inch pitch and 13-7/8-inch diameter identify the propeller’s size, while the stated right-hand rotation helps narrow the selection to the corresponding setup. Solas specifically cites powerful thrust, stern lift, and acceleration, benefits relevant to getting underway and carrying the boat’s stern. Its midrange speed and economy claims speak to cruising use rather than just initial pickup. The product is described as balanced and precision made, with a thinner, high-strength stainless blade intended to support smooth, efficient operation.

Skip it if you need a different listed pitch; the Turning Point Express 31501912 is also 19-inch pitch but has a 14-1/4-inch diameter.

Choose this Solas for a right-hand setup where stern lift, acceleration, and midrange cruising are priorities. Its 13-7/8-inch diameter and 19-inch pitch are specific selection points, so those dimensions and rotation should suit your application.

Listed on Amazon as: Solas 3451-139-19 HR Titan 3 Stainless Steel 3-Blade Propeller – RH, 13-7/8" Diameter x 19" Pitch

#2 · Performance Features

2. Turning Point Express

Best for: Acceleration and boat-lift priorities.

Why it ranks #2: This 14-1/4 x 19 three-blade propeller lists 15-5 stainless steel, progressive pitch, aggressive rake and cupping, and tuned vents.

Turning Point combines aggressive rake and cupping with tuned vents, a feature set aimed at improving boat lift, handling, and hole shot. The 14-1/4-by-19-inch, right-hand, three-blade stainless propeller also uses progressive pitch angles, which the product description links to reduced slip and improved performance and fuel economy.

The aggressive rake and cupping are described as supporting boat lift and handling, while tuned vents target a faster hole shot. Progressive pitch angles channel water to minimize slip, connecting the propeller’s geometry to the listed performance and fuel-economy claims. Its 14-1/4-inch diameter, 19-inch pitch, three-blade design, and right-hand rotation define the selection. The propeller is made from 15-5 stainless steel, which the listing says gets harder and stronger with age.

Skip it if you need listed Mercury compatibility; the CAPTAIN 13-by-19 model specifies Mercury and Force applications from 40 to 140 HP.

Choose this Turning Point for a right-hand setup where hole shot, lift, and handling are priorities, and where its 14-1/4-by-19 dimensions suit the boat. The supplied listing does not identify compatible engines.

Listed on Amazon as: Turning Point Propeller 31501912 Express Right Stainless 3-Blade Propeller (14-1/4 X 19)

#3 · Four-Blade Mercury

3. CAPTAIN Mercury Four-Blade

• Package Dimensions: 15.39 x 14.21 x 7.56 in
• Package Weight: 6.26 kg

Best for: Mercury four-blade setup.

Why it ranks #3: The four-blade, 13-inch-diameter, 19-pitch right-hand propeller specifies a 15-spline fit and a broad listed Mercury and Force horsepower range.

A four-blade layout distinguishes this CAPTAIN propeller from the listed three-blade options, giving Mercury owners a specific blade-count choice alongside a 13-inch diameter and 19-inch pitch. Its 15-spline tooth and right-hand rotation further define the configuration for selecting a compatible outboard replacement.

The 13-inch diameter, 19-inch pitch, 15-spline tooth, and right-hand rotation provide concrete configuration details for matching the propeller to a Mercury outboard. The listing names applications from 40 to 140 HP across several Mercury and Force engine ranges. Its four-blade design is a clear choice for buyers who want that blade count, though the supplied information does not give performance claims to compare with other designs. CAPTAIN describes itself as a propeller manufacturer and an NMPA member.

Skip it if you have a Mercury 225 HP engine; the YOUNG PROPS 14 1/2-by-19 propeller is listed for Mercury 135–300 HP.

Consider this CAPTAIN for a listed Mercury or Force application from 40 to 140 HP when a four-blade, right-hand propeller is the target. Its 15-spline hub, 13-inch diameter, and 19-inch pitch are key fit considerations.

Listed on Amazon as: CAPTAIN 4 Blades Stainless Steel Boat Propeller fit Mercury, 13 Diameter x 19 Pitch, 15 Spline Tooth Outboard Engines Motor Prop, OEM RH Propellers for 40 50 70 Force 75 80 90 100 115 125 140 HP

#4 · Yamaha Fit Range

4. VIF Yamaha Propeller

• Package Dimensions: 15.55 x 15 x 7.56 in
• Package Weight: 5.95 kg
• Material: Stainless Steel

Best for: Yamaha 60–115 HP pitch options.

Why it ranks #4: It is listed for Yamaha 60–115 hp motors, offers 15-spline fit and pitches from 14 to 21, and includes a one-year warranty description.

Five listed pitch choices—14, 15, 17, 19, and 21 inches—make this VIF stainless propeller a flexible option for Yamaha 60–115 HP owners comparing pitch. The listing specifies a 15-spline configuration and includes the propeller, giving the selection a defined engine range and hub detail.

The 14-, 15-, 17-, 19-, and 21-inch pitch options let buyers choose among several stated configurations for Yamaha 60–115 HP motors. A 15-spline hub provides another concrete fit detail to check against the outboard. The propeller is stainless steel, and the listed style is 13-1/4 by 17 inches, identifying one particular size configuration within the broader pitch options. Only the propeller is listed as included, which keeps the package contents straightforward.

Skip it if you need a hub kit in the package; the YOUNG PROPS 14 1/2-by-19 Mercury propeller includes propeller and hub kits.

This VIF is for Yamaha 60–115 HP owners who want several stated pitch choices and a 15-spline stainless propeller. Its 13-1/4-by-17-inch style is one listed configuration, and the package lists the propeller alone.

Listed on Amazon as: VIF Boat Propeller for Yamaha 60-115hp Motors 15 Spline 14p 15p 17p 19p 21p

#5 · High-HP Mercury Fit

5. YOUNG PROPS Mercury 15T

• Package Dimensions: 15.4 x 15.2 x 7.4 in
• Package Weight: 6.21 kg
• Material: Stainless

Best for: Mercury 135–300 HP owners.

Why it ranks #5: Its 14-1/2 x 19 listing targets Mercury 135–300 hp engines and specifies 15 teeth; packaging includes a propeller and hub kits.

A 14-1/2-by-19-inch stainless propeller with a 15-tooth hub targets Mercury 135–300 HP applications, giving owners a defined engine range and propeller size to work from. The package includes propeller and hub kits plus installation instructions, supporting a more organized replacement process.

The stated 14-1/2-inch diameter and 19-inch pitch give buyers concrete dimensions to compare with their intended setup, while the 15-tooth specification identifies the listed hub configuration. Its compatibility range is Mercury 135–300 HP, and the supplied information specifically confirms applicability to a 2016 Mercury 225 Pro XS. Propeller and hub kits are included, and installation instructions accompany them, so buyers have both components and guidance for the installation workflow.

Skip it if you run a Mercury 40–60 HP engine; the YOUNG PROPS 13-tooth 40–60 HP propeller is listed for that range.

This is a practical candidate for Mercury owners within the stated 135–300 HP range who want a 19-inch-pitch stainless propeller with hub kits and instructions included. Check that its 15-tooth configuration suits your installation.

Listed on Amazon as: 14 1/2 x19Stainless Boat Propeller for Mercury135-300HP 15Tooth

#6

6. CAPTAIN Mercury Propeller

• Package Dimensions: 14.65 x 13.03 x 7.52 in
• Package Weight: 6.57 kg

Best for: Mercury and Force 15-spline fit.

Why it ranks #6: This right-hand, 13-inch-diameter, 19-pitch propeller specifies 15 spline teeth and a listed application covering Mercury and Force engines.

CAPTAIN specifies a 13-inch diameter, 19-inch pitch, and 15-spline tooth for this right-hand stainless propeller, with listed Mercury and Force applications spanning 40–140 HP. Those concrete compatibility details make it a defined replacement option for owners within the stated engine range.

The 13-by-19 dimensions, 15-spline tooth, and right-hand rotation give Mercury and Force owners several key details to compare when selecting a replacement. The listing names engine applications from 40 to 140 HP, including several intervening horsepower ratings. Unlike the separate CAPTAIN four-blade listing, this product title does not specify a blade count, so buyers should rely on the stated fit and dimensions rather than assume that configuration. CAPTAIN reports that it manufactures propellers and belongs to NMPA.

Skip it if you need an explicitly listed four-blade design; the CAPTAIN 13-by-19 four-blade model states that configuration.

Consider this CAPTAIN for a Mercury or Force outboard in the listed 40–140 HP range when a right-hand, 15-spline, 13-by-19 propeller matches your setup. The title does not identify its blade count.

Listed on Amazon as: CAPTAIN Stainless Steel Outboard Propeller fit Mercury, 13 Diameter x 19 Pitch, 15 Spline Tooth Boat Motor Prop, RH Propellers for 40 50 70 Force 75 80 90 100 115 125 140 H

#7

7. JSPROP Evinrude Propeller

• Package Dimensions: 14.09 x 13.74 x 7.83 in
• Package Weight: 5.1 kg
• Material: Stainless Steel

See also  Best Collapsible Electric Tea Kettles: Top 10 Picks

Best for: BRP Johnson Evinrude replacement.

Why it ranks #7: It specifies 13-1/4 x 17 dimensions, 13 spline teeth, right-hand rotation, and a listed BRP Johnson Evinrude application from 40 to 140 hp.

A 13-1/4-by-17-inch size and 13-spline tooth position this JSPROP stainless propeller for listed BRP Johnson and Evinrude applications. Its right-hand rotation and broad stated horsepower coverage, including compatible Evinrude models from 50 to 135 HP, give owners useful details for narrowing a replacement choice.

The 13-1/4-inch diameter, 17-inch pitch, and 13-spline tooth specify the main dimensions and hub configuration for comparison with a Johnson or Evinrude outboard. The listing names BRP applications from 40 to 140 HP and enumerates Evinrude ratings from 50 through 135 HP. Right-hand rotation further defines orientation. Stainless-steel construction and a polished finish are specified, while the included component is the propeller itself, making package contents clear for planning a replacement.

Skip it if you run a Mercury 40–140 HP outboard; the CAPTAIN 13-by-19 15-spline propeller is listed for Mercury and Force engines.

This JSPROP is a candidate for BRP Johnson or Evinrude owners whose engine falls within the stated range and whose setup calls for a right-hand, 13-spline, 13-1/4-by-17 propeller. Confirm those configuration details against your application.

Listed on Amazon as: 13 1/4×17 Stainless Steel Outboard Boat Propeller for BRP Johnson Evinrude 40-140HP 13 Spline Tooth,763951,Compatible with Evinrude 50 60 65 70 75 85 88 90 100 110 112 115 120 125 130 135HP, RH

#8

8. YOUNG PROPS Mercury 13T

• Material: Stainless Steel

Best for: Mercury 40–60 HP replacement.

Why it ranks #8: The listing identifies a three-blade, right-hand, 13-spline stainless propeller for Mercury 40–60 hp engines, though detailed fitment needs checking.

This YOUNG PROPS model pairs a 13-tooth hub with right-hand rotation and a three-blade duplex stainless-steel construction for listed Mercury 40–60 HP engines. Its defined engine range and corrosion-resistant material make it a focused option for owners replacing a propeller on an applicable outboard.

The 13-tooth configuration and right-hand rotation narrow the setup details buyers need to compare, while the listing identifies the propeller for Mercury 40–60 HP outboards. Duplex stainless steel is described as high strength and resistant to corrosion in seawater and river water, a relevant material feature for boat use. The three-blade layout and polished finish complete the stated configuration. Its recommended use includes inflatable boats, but the supplied facts do not specify a pitch in the key features.

Skip it if you need a stated pitch before choosing; the Solas 3451-139-19 specifies a 19-inch pitch and 13-7/8-inch diameter.

This propeller suits Mercury 40–60 HP owners seeking a right-hand, three-blade stainless option, including those using an inflatable boat. Its 13-tooth hub is specified, but buyers needing a stated pitch should consider that missing selection detail.

Listed on Amazon as: Upgrade Stainless Steel Outboard Boat Propeller for Mercury Engines 40-60HP, 13 Tooth, RH

#9

9. ARKDOZA Tohatsu Propeller

• Package Dimensions: 9 x 9 x 5 in
• Package Weight: 4.4 lb
• Material: Stainless-Steel

Best for: Small Tohatsu and Nissan outboards.

Why it ranks #9: It specifies 9.25-inch diameter, 14 spline teeth, right-hand rotation, and 9, 10, or 11 pitch options for Tohatsu/Nissan 9.9–20 hp engines.

A 9.25-inch diameter and 14-spline hub place this ARKDOZA propeller in a compact configuration for listed Tohatsu and Nissan 9.9–20 HP outboards. Buyers can choose among 9-, 10-, and 11-inch pitches, with right-hand rotation and a pressed-in rubber hub also specified.

The three listed pitch choices—9, 10, and 11 inches—let owners select among stated options while retaining the 9.25-inch diameter and 14-spline configuration. Compatibility is listed for factory 9.9, 12, 15, 18, and 20 HP Tohatsu and Nissan motors. A thru-hub exhaust and pressed-in OEM rubber hub bushing define the construction, while the high-polished finish and stainless-steel blades are described as easy to maintain and repair.

Skip it if you run a Mercury 40–60 HP outboard; the YOUNG PROPS 13-tooth propeller is listed for that engine range.

Choose this ARKDOZA for a listed small Tohatsu or Nissan outboard when its 9.25-inch diameter, 14-spline hub, and one of the three pitches fit your setup. Its stated engine range does not cover larger motors.

Listed on Amazon as: 9 1/4×9 9 1/4×10 9 1/4×11 Stainless Steel Propeller for Tohatsu Nissan Outboard 14 Spline Tooth SS Props 9.9/12/15/18/20HP RH 9.25×9 9.25×10 9.25×11

#10

10. SOLAS HR Titan 4

• Package Dimensions: 12 x 12 x 12 in
• Package Weight: 16 oz

Best for: High-pitch four-blade setups.

Why it ranks #10: This is a stainless four-blade propeller with a listed 14-inch diameter and 25-inch pitch, but the supplied details give little engine-fit information.

A 25-inch pitch and four-blade stainless construction define this SOLAS HR Titan, a specific option for buyers seeking that combination rather than a lower-pitch three-blade propeller. The listing also gives a 14-inch diameter, making the core size and blade-count details clear for selection.

The 14-inch diameter and 25-inch pitch establish the stated dimensions, while the four-blade layout distinguishes the propeller’s configuration. Those details help buyers compare the selection with their intended setup, but the supplied listing gives no engine compatibility range or performance explanation beyond the HR Titan name. SOLAS is the named manufacturer. Because the listing provides only the diameter, pitch, and blade count, buyers should base their choice on those stated specifics rather than assume an unlisted fit or operating benefit.

Skip it if you need a stated Mercury engine range; the CAPTAIN 13-by-19 four-blade propeller lists Mercury and Force applications from 40 to 140 HP.

This SOLAS suits buyers whose setup calls for a 14-inch, 25-pitch, four-blade stainless propeller. The listing does not state compatible engines, so it is best considered when those dimensions already match the application.

Listed on Amazon as: SOLAS HR Titan 4 Blade Stainless 14" Dia. X 25" Pitch SR