Best Struts For Honda Element: Compare Complete Assemblies

#1 · Best Overall

1. Detroit Axle Front Rear Struts

• Weight: 81.2 lb

Best for: Ready-to-install four-piece set.

Why it ranks #1: Includes two front and two rear complete strut-and-coil-spring assemblies, is ready to install without special tools, and explicitly excludes SC models.

Detroit Axle supplies front and rear complete struts with coil springs and says they are ready for installation without additional work or special tools. That all-in-one format enables a four-corner replacement while avoiding separate spring-to-strut assembly, for 2003–2011 Honda Element DX, EX, and LX models excluding SC.

The kit includes two front and two rear strut-and-coil-spring assemblies, making it a single-set option for replacing both ends. Detroit Axle says no additional work or special tools are required for installation, a practical advantage for buyers seeking to avoid assembling components before fitting. Its stated application covers 2003–2011 DX, EX, and LX Elements but excludes SC. Impact, wear, and fatigue testing are listed, along with a 10-year warranty.

Skip it if you own an SC Element; KUIPERAUTO K104GJ045678KJ4 lists 2003–2011 2.4L fitment without an SC exclusion.

For DX, EX, and LX owners replacing all four corners, this kit combines complete spring assemblies with an installation-ready format. The SC exclusion is decisive, so buyers of that trim should select another explicitly compatible option.

Listed on Amazon as: Detroit Axle – Front Rear Struts for 2003-2011 Honda Element [Exc. SC]

#2 · Ready-to-Install Set

2. Complete Struts Quick Assembly

• Compatible with Vehicle Type: Car
• Material Type: Metal, Rubber
• Weight: 72 lb

Best for: Quick-install non-SC replacement.

Why it ranks #2: Supplies front and rear complete assemblies with coil springs for the Element and clearly excludes SC models; it also lists a limited one-year warranty.

Complete Struts offers front and rear quick complete assemblies for 2003–2011 Honda Element models, excluding SC, enabling buyers to replace the set without rebuilding old struts. The listing describes fully assembled units and says the kit makes all components new, making it a practical option for a comprehensive suspension refresh.

The set covers the front and rear, and the ready-to-install format avoids rebuilding the old struts as described by the listing. Complete Struts also recommends inspecting control-arm bushings and ball joints, since compromised components can contribute to alignment issues. It notes that an alignment will be needed after new struts are installed, so buyers should account for that follow-up in the repair workflow. Fitment is for 2003–2011 Elements and excludes SC models.

Skip it if you own an SC Element; Detroit Axle 80388-4A explicitly excludes SC too, so choose a listing that states your trim is covered.

This is a fit for non-SC Element owners seeking front-and-rear complete assemblies and a clear installation follow-up. Plan for an alignment after installation, and inspect related bushings and ball joints as the listing advises.

Listed on Amazon as: Front & Rear Quick Complete Struts Assembly with Coil Springs Replacement for 2003-2011 Honda Element (Set of 4)

#3 · SC-Excluded Full Set

3. Youxmoto Complete Strut Set

• Compatible with Vehicle Type: Car
• Material Type: Iron

Best for: SC-excluded complete four-piece kit.

Why it ranks #3: Provides four complete front-and-rear assemblies with struts, coils, springs, and mounts, and states compatibility with the 2.4L Element while excluding SC.

Youxmoto provides four complete front and rear strut assemblies with springs and mounts for 2003–2011 Honda Element 2.4L models, enabling replacement at all four corners. The listing explicitly excludes SC submodels, a useful boundary for buyers selecting a kit against their Element's trim.

The included strut, coil spring, and mount assemblies let buyers source the listed components together for front and rear replacement. Youxmoto identifies replacement references 171101L, 171101R, 172135, and 172136, helping match the kit to application details. Fitment is stated for 2.4L Elements from 2003 through 2011, with SC submodels excluded. The listing also describes improved stability and driving comfort as intended benefits, connecting the replacement to everyday ride and control needs.

Skip it if you drive an SC Element; KUIPERAUTO K104GJ045678KJ4 lists 2003–2011 2.4L fitment without stating an SC exclusion.

Choose Youxmoto for a four-corner 2.4L Element replacement when the vehicle is not an SC and you want springs and mounts included. The explicit SC exclusion makes trim identification essential before selecting this set.

Listed on Amazon as: Front & Rear Left Right Complete Strut Spring Shock Absorber fits for Honda Element 2.4L 2003-2011 (Excludes SC Submodel), 171101L 171101R 172135 172136-4PCS

#4

4. Aeagle Front Rear Assembly

• Compatible with Vehicle Type: Car
• Material Type: Alloy Steel

Best for: Four-corner gas-and-oil set.

Why it ranks #4: Includes four left-and-right assemblies with coil springs for the 2.4L Element, making it a clearly specified full-vehicle replacement option.

Aeagle lists four front and rear strut shock assemblies with coil springs for the 2003–2011 Honda Element 2.4L, enabling a complete-vehicle replacement from one kit. Its inflatable design separates high-pressure gas and oil with a floating piston, a construction detail tied to its stated greater damping and work reliability.

The kit specifies one assembly for each front and rear left and right position, supporting a coordinated four-corner job instead of separate axle purchases. Aeagle's floating-piston design separates high-pressure gas and oil, and the listing connects that arrangement with greater damping and work reliability. Alloy steel is the stated material. Fitment is identified for 2.4L Elements from 2003 through 2011, and the replacement references are 171101L, 171101R, 172135, and 172136.

Skip it if you need a kit explicitly listing SC exclusion and trim coverage; Detroit Axle 80388-4A specifies its DX, EX, and LX application and excludes SC.

This Aeagle set fits buyers planning a four-corner replacement on a 2003–2011 2.4L Element who value the listed floating-piston damping design. Its application is specified for 2.4L models, so confirm that matches the vehicle.

Listed on Amazon as: Front & Rear Strut Shock Assembly w/Coil Spring for Honda Element 2.4L 2003-2011, Replace 171101L 171101R 172135 172136, Left & Right, 2PCS

#5

5. MOSTPLUS Complete Strut Set

• Weight: 86.3 lb

Best for: Full-vehicle replacement set.

Why it ranks #5: Offers a four-piece front-and-rear complete assembly set for the listed Element fitment range, though its supplied details give fewer trim-specific limits.

A four-piece front-and-rear set lets Honda Element owners replace complete strut assemblies across the vehicle in one purchase. MOSTPLUS lists compatibility with 2003–2011 Elements and supplies pre-assembled units, so the replacement starts with assemblies rather than a rebuild of individual strut components.

The complete front and rear set covers all four corners, which can simplify planning a full-vehicle suspension replacement compared with sourcing ends separately. MOSTPLUS describes the units as pre-assembled and says installation involves removing the old assembly and installing the new one; that can reduce assembly work during the job. The listing gives 2003–2011 Honda Element fitment and replacement numbers 171101L, 171101R, 172136, and 172135, providing specific application references to check against the vehicle.

Skip it if you need an explicit SC exclusion or detailed trim guidance; Detroit Axle 80388-4A names its SC exclusion and DX, EX, and LX coverage.

Choose this set if you are replacing front and rear strut assemblies on a 2003–2011 Honda Element and value pre-assembled parts. Check the vehicle application carefully, since the listing does not spell out trim exclusions.

Listed on Amazon as: 4PCS Front & Rear Strut Assembly Compatible for 03-11 Honda Element 172136

#6

6. KUIPERAUTO Complete Struts

• Compatible with Vehicle Type: Car
• Material Type: steel

Best for: All-four-corners comfort replacement.

Why it ranks #6: Includes two front and two rear assemblies for the 2.4L Element and lists a one-year warranty; its cushioning claims are not independently verified here.

KUIPERAUTO pairs four complete front and rear strut assemblies with a stated 2003–2011 Honda Element 2.4L application, enabling a whole-vehicle replacement with one set. The listing also highlights cushioning intended to ease road bumps and support stability across on-road, off-road, and track driving scenarios.

Two front and two rear assemblies mean buyers can plan a four-corner replacement without piecing together separate axle orders. KUIPERAUTO says its shock absorber quickly controls body bounce and eases road bumps, linking the assembly to a more settled, comfortable ride. The stated 2.4L fitment and replacement numbers 172136, 172135, 171101L, and 171101R give useful application checks. Steel is the listed material, and a one-year warranty is specified.

Skip it if you have an SC Element; Detroit Axle 80388-4A explicitly excludes SC while covering its stated DX, EX, and LX applications.

This set suits 2.4L Element owners replacing both axles who want the listed cushioning benefit and full four-piece coverage. Its stated fitment is limited to 2003–2011 2.4L applications, so verify the exact configuration.

Listed on Amazon as: KUIPERAUTO Front Rear Complete Struts Assembly 171101R 171101L 172135 172136 Compatible for 2003-2011 Honda Element Replacement Coil Spring Shocks Absorbers (4PCS)

#7 · Front Plus Links

7. Detroit Axle Front Struts Kit

• Compatible with Vehicle Type: Car
• Material Type: Metal
• Weight: 55.5 lb

Best for: Front struts with sway links.

Why it ranks #7: Pairs two front quick-install struts with coil springs and two stabilizer sway-bar end links; the listing excludes SC models.

Detroit Axle combines two front quick-install struts with coil springs and two front stabilizer sway bar end links, enabling a focused front suspension job that includes links. Its stated 2003–2011 Honda Element application excludes SC models, distinguishing this kit from a four-corner front-and-rear replacement.

The two front strut assemblies target the front axle, while the paired stabilizer sway bar end links add another listed suspension component to the same kit. That combination can suit buyers addressing both front struts and links in one repair workflow. Detroit Axle describes the struts as quick-install and ready with coil springs, limiting the need to source those pieces separately. The listing also cites impact, wear, and fatigue testing; fitment excludes SC Elements.

Skip it if you need rear struts in the same purchase; Detroit Axle 80388-4A includes two front and two rear assemblies.

Choose this kit for a non-SC Element front repair when sway bar end links are also part of the job. It does not supply rear struts, so buyers planning a full-vehicle replacement need a four-corner set.

Listed on Amazon as: Detroit Axle – Front 4pc Struts Kit for 2003-2011 Honda Element

#8

8. TadaAuto Front Struts

• Compatible with Vehicle Type: Car

Best for: Trim-specific front pair.

Why it ranks #8: A front-axle option with stated EX and LX fitment details, but it excludes SC and DX submodels and does not replace rear struts.

TadaAuto lists a front strut assembly pair for 2003–2011 Honda Element 2.4L EX and LX applications, with exclusions for SC and DX. Its stated manufacturing and quality-control system aims for consistent damping force, enabling a front replacement focused on shock absorption and reduced component wear.

The front-pair focus suits a repair limited to the front rather than a full four-corner replacement. TadaAuto connects its standardized manufacturing and quality-control system with consistent damping force, and says that shock absorption can reduce component wear. The fitment details vary by year: 2003 EX, and 2004–2011 EX and LX, all 2.4L, while SC and DX are excluded. The listing also describes installation as easy, though it gives no specific procedure.

Skip it if you have a DX or SC; Detroit Axle 80388-4A lists DX, EX, and LX coverage while excluding SC.

This pair suits owners of the listed 2.4L EX or LX Element years replacing front struts and seeking the stated damping consistency. Check the year-and-trim boundaries carefully; DX and SC applications are excluded.

Listed on Amazon as: Front Struts Assembly Fit for 2003-2011 Honda Element 2.4L EX LX

#9 · Trim-Limited Front Pair

9. KUSATEC Front Pair

• Weight: 55.9 lb

Best for: Front-pair OE-spec replacement.

Why it ranks #9: Includes two front strut-and-spring assemblies, with fitment limited to specified model years and LE or LX trims in later years.

KUSATEC supplies two front strut spring assemblies to OE specifications, enabling a direct-fit-style front replacement for its listed Honda Element applications. Fitment covers all models from 2003–2006 and LE and LX models from 2007–2011, while the listing says each assembly is tested before shipment.

The two-piece front set is focused on the front axle, so it suits buyers replacing that pair rather than all four struts. KUSATEC states OE-spec manufacture and direct-fit intent, which supports a replacement workflow centered on the existing front application. It also says the assemblies are tested before shipment and describes precise engineering for improved control, proper damping, and consistent balance. Fitment narrows for 2007–2011 to LE and LX models, unlike the all-model coverage listed for 2003–2006.

Skip it if you need rear assemblies too; MOSTPLUS M0141045678 lists a pre-assembled front-and-rear four-piece set.

KUSATEC suits buyers replacing the front pair within its stated year-and-trim coverage who want OE-spec assemblies. It is not a full-vehicle kit, and 2007–2011 fitment is limited to LE and LX models.

Listed on Amazon as: KUSATEC 172136 172135 Front Pair Complete Struts Shock Absorber

#10

10. MOPARTS Front Struts

• Compatible with Vehicle Type: Car

Best for: Front-axle strut replacement.

Why it ranks #10: The title identifies a front assembly for the Element, but the supplied specifications list no included components and provide little detail about axle coverage.

MOPARTS lists a front complete struts assembly for the 2003–2011 Honda Element, enabling buyers to focus a replacement on the front rather than purchasing a front-and-rear kit. Its title identifies strut part reference 172135, while the specifications also list model number 172136 172135.

The front-only description makes this a focused option when the job is limited to the Element's front struts, rather than a four-corner replacement. MOPARTS identifies the application as a 2003–2011 Honda Element and lists 172136 and 172135 as model numbers, giving the buyer references to compare with the vehicle's requirements. The specifications state that included components are “NO,” so the listing does not establish what, if anything, is packaged beyond the titled assembly.

Skip it if you need a documented four-corner kit; Detroit Axle 80388-4A lists two front and two rear complete assemblies.

Consider this MOPARTS listing if your repair is specifically for the front of a 2003–2011 Element and the application references match your needs. The sparse component details make it unsuitable when the contents must be fully documented.

Listed on Amazon as: Front Complete Struts Assembly Fit for 03-11 Honda Element, 172135