Best Atv Lift Table for ATV, UTV, and Garage Work

#1 · Best Overall

1. Black Widow ATV Lift Table

• Load Capacity: 1500 lb
• Material: Steel
• Compatible with Vehicle Type: Tractor

Best for: Air-over-hydraulic ATV servicing.

Why it ranks #1: Designed for ATVs, it supports 1,500 pounds, raises from 6.75 to 33.5 inches, and has a 78-by-47-inch platform with tie-down points.

The 33.5-inch maximum lift height raises an ATV from a 6.75-inch starting position, creating access for service, cleaning, or storage. Its air-over-hydraulic system combines a compressed-air foot pedal with a hydraulic ram, and the 1,500-pound capacity is specified for ATV lifting.

The 78-by-47-inch platform gives an ATV a broad deck, while built-in tie-down points provide attachment locations for safety straps; straps themselves are not included. A compressed-air foot pedal operates the hydraulic ram to raise the machine, with at least 90 PSI required and no compressor supplied. The lift reaches 33.5 inches from a 6.75-inch minimum, supporting work above floor level, and the listed load limit is 1,500 pounds.

Skip it if you need a lift explicitly listed for motorcycles and lawn tractors; the ZEEVIUMFT Zee-PROLIFT-ATV specifies those vehicle types too.

This is a fit for ATV owners seeking a full platform and elevated access for garage maintenance, cleaning, or storage. Plan for an air compressor and separate safety straps, and keep the machine within the 1,500-pound capacity.

Listed on Amazon as: Black Widow Air Over Hydraulic ATV Lift Table, 1,500 lb Cap, 33.5" H Lift

#2 · Multi-Equipment Fit

2. ZEEVIUMFT ATV Lift Table

• Load Capacity: 1500 lb
• Compatible with Vehicle Type: ATV, UTV, Motorcycle, Lawn Tractor, Power…

Best for: Multi-equipment wide-deck lifting.

Why it ranks #2: Its 1,500-pound capacity and 48-inch-wide deck suit ATVs, UTVs, lawn tractors, and power equipment; the front extension reaches 106 inches.

A 48-inch-wide reinforced steel deck and 106-inch length with the front extension installed give this 1,500-pound lift space for ATVs, UTVs, motorcycles, and lawn tractors. Its air/hydraulic system raises equipment from 7 to 33.5 inches for service access above the loading position.

The listed compatibility across ATVs, UTVs, motorcycles, lawn tractors, and power equipment makes the broad deck useful where a shop services several machine types. With the front extension installed, its 106-inch length provides support for longer wheelbases; the 48-inch width adds lateral deck space. The lift raises to 33.5 inches from a 7-inch minimum, and included ramps, side extensions, a clamp, and stabilizer bar support loading and positioning.

Skip it if you need a 2,500-pound platform with a 48.5-inch working height; the Black Widow UTV-2500-64 offers both specifications.

This suits workshops handling several kinds of recreational and yard equipment, especially machines needing a wide, extended deck. Check machine weight and loading dimensions against its 1,500-pound capacity and the platform configuration.

Listed on Amazon as: 1,500 LB ATV/Motorcycle Lift Table – Heavy-Duty Air/Hydraulic Power Lift, Extra-Wide 48" Platform, Ergonomic Stand-Up Installation, Bonus Jack, Fits ATV/UTV/Motorcycle/Lawn Tractors

#3 · Highest Capacity

3. Black Widow UTV Lift Table

• Load Capacity: 2500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Utility Terrain Vehicle

Best for: Large UTV and golf-cart service.

Why it ranks #3: The 2,500-pound rating and 94.5-by-60-inch platform serve larger ATVs and UTVs, with a stated lift range of 8 to 48.5 inches.

A 2,500-pound capacity and 48.5-inch maximum working height make this Black Widow table a substantial option for UTV, ATV, and golf-cart service. Its 94.5-by-60-inch platform provides broad vehicle support, while the air-over-hydraulic foot pump raises equipment from an 8-inch starting height.

The 60-inch-wide platform accommodates larger recreational vehicles, and wheel stops help keep four-wheelers positioned on the deck. An automatic safety lock has 10 positions, providing multiple locking heights during work. The air-over-hydraulic foot pump raises loads up to 2,500 pounds and requires compressed air; the supplied facts give a 90–150 PSI requirement. Its 48.5-inch maximum height offers elevated access for maintenance and detailing, though the compressor is not included.

Skip it if you need a 48-inch-wide table with a 33.5-inch lift height for lawn tractors; the ZEEVIUMFT Zee-PROLIFT-ATV lists that compatibility.

This suits shops servicing heavier UTVs, ATVs, or golf carts that need a large platform and elevated access. Confirm the machine stays within the 2,500-pound rating and provide the required compressed-air supply.

Listed on Amazon as: 64" W UTV Lift Table, 2,500 lb, Air/Hydraulic, ATV Motorcycle, Black Widow

#4 · Portable Hydraulic

4. VEVOR Hydraulic Lift Jack

• Load Capacity: 1500 lb
• Material: Steel
• Compatible with Vehicle Type: ATV, Motorcycle, Powersports, UTV

Best for: Portable hydraulic jack users.

Why it ranks #4: This 58-pound hydraulic jack supports 1,500 pounds and lists ATV, UTV, and motorcycle compatibility, offering a smaller alternative to a shop table.

At 58 pounds with four wheels, this VEVOR hydraulic lift jack can be moved around a garage more readily than a full-size table. Its 1,500-pound capacity covers listed motorcycle, ATV, and UTV applications, while foot operation raises a machine for maintenance and cleaning.

The hydraulic foot-operated design lets a user raise a compatible machine without relying on compressed air, and the long handle provides leverage for operating the lift. Four wheels support moving the 58-pound jack around a workspace, while its 1,500-pound rating covers standard motorcycles, touring bikes, cruisers, ATVs, and other listed powersports vehicles. Two ratchet belts are included to help secure a machine. Its compact 33.1-by-16.1-inch dimensions distinguish it from a full-length lift table.

Skip it if you need a long, wide platform for an ATV; the Black Widow BW-1500AO-V2 lists a 78-by-47-inch deck.

This works for riders wanting a wheeled hydraulic jack for motorcycle, ATV, or UTV jobs without setting up compressed air. Its compact platform is a different format from a full-length table, so consider the machine’s support needs.

Listed on Amazon as: VEVOR Hydraulic Motorcycle Lift Jack 1500 LBS Capacity ATV Scissor Lift Jack Portable Motorcycle Lift Table with 4 Wheels Hydraulic Foot-Operated Hoist Stand for Motorcycle ATV UTV Powersports

#5

5. Black Widow Hydraulic Lift Jack

• Load Capacity: 1500 lb
• Material: Steel
• Compatible with Vehicle Type: ATV, Motorcycle

Best for: Air-free compact service lifting.

Why it ranks #5: It lists both ATV and motorcycle compatibility, a 1,500-pound capacity, and foot-pedal lifting from 4.88 to 16 inches without air tools.

Foot-pedal hydraulics raise this Black Widow jack from 4.88 to 16 inches without requiring air tools, making it a direct option for lower-height motorcycle and ATV service. Its 1,500-pound capacity and powder-coated steel construction suit garage tasks such as cleaning, repair, and seasonal storage.

The hydraulic pedal raises the platform through a 4.88-to-16-inch range, so the lift can provide service clearance without a compressed-air setup. A 1,500-pound rating supports listed motorcycles and ATVs, while powder-coated steel forms the jack’s frame. The lifted platform measures 13.33 by 13.75 inches, with full lift dimensions of 33 by 16 inches; this compact format is suited to lifting a vehicle rather than supporting it on a full-size table.

Skip it if you need elevated ATV work above 16 inches; the Black Widow BW-1500AO-V2 reaches 33.5 inches.

This fits motorcycle or ATV owners who want hydraulic pedal lifting for lower-height garage work without air tools. Its 16-inch maximum and compact platform set clear limits for tasks needing more elevation or a full table.

Listed on Amazon as: Black Widow Hydraulic Steel Motorcycle and ATV Lift Jack Stand, 1,500 lb

#6

6. ZEEVIUMFT Motorcycle Lift Table

• Load Capacity: 1500 lb
• Material: Steel
• Compatible with Vehicle Type: Motorcycle

Best for: Wide motorcycle workshop platform.

Why it ranks #6: The 1,500-pound capacity, 48-inch-wide platform, and side extensions may suit some machines, but its stated compatible vehicle type is motorcycle.

A 48-inch-wide platform paired with eight adjustable height positions gives this 1,500-pound pneumatic lift room for motorcycle service and finer positioning. The foot pedal raises bikes from 7 to 31.25 inches, while included side extensions and ramps expand the loading setup beyond the central lift.

The extra-wide platform measures 106 inches long by 48 inches wide, giving larger motorcycles a broad support area during maintenance. Eight height positions help set a working level, and the pneumatic foot pedal handles raising, although operation requires 90–110 PSI from an air compressor that is not included. Included ramps, side extensions, a clamp, and a stabilizer bar provide components for loading and securing the bike; the listed compatibility is motorcycles.

Skip it if you need a platform explicitly listed for ATVs, UTVs, or lawn tractors; the ZEEVIUMFT Zee-PROLIFT-ATV covers those vehicle types.

This fits motorcycle builders who need a broad platform, adjustable working heights, and included loading extensions. Its listed vehicle compatibility is motorcycles, so ATV or utility-equipment owners should select a model that names their machine type.

Listed on Amazon as: 1500 LB Motorcycle Lift Table, Heavy Duty Air/Hydraulic ATV Lift with Side Extensions, 48" W x 33.5" H, User-Friendly Installation Design with Motorcycle Jack, Fits Harley/Indian/Custom

#7

7. KATOOL Motorcycle Lift Table

• Load Capacity: 1500 lb
• Material: steel
• Compatible with Vehicle Type: Motorcycle, ATV

Best for: Hydraulic motorcycle workshop lift.

Why it ranks #7: It supports 1,500 pounds and lists ATV compatibility, but its product focus is motorcycles and its dimensions are 87 by 37 by 15 inches.

An extra-wide non-slip loading ramp gives this 1,500-pound KATOOL lift a grippy approach for bringing motorcycles onto its hydraulic scissor platform. Its reinforced steel construction and stated motorcycle and ATV compatibility suit frequent garage or workshop lifting, while pedal operation controls the hydraulic pump.

The 87-by-37-inch lift table provides a defined work surface, and the extra-wide ramp’s textured, non-slip surface supports loading with added grip. A hydraulic pedal pump raises the machine, avoiding the need for an air supply. The 1,500-pound capacity is stated for most motorcycles and ATVs, including cruisers, sport bikes, and heavy touring motorcycles. At 560 pounds, this is a substantial shop fixture rather than a light jack for carrying between work areas.

Skip it if you need a lightweight wheeled jack for moving around a small garage; the VEVOR ZX0901-7B weighs 58 pounds and has four wheels.

This fits a workshop regularly lifting motorcycles or ATVs with a hydraulic table and grippy loading ramp. Its 560-pound weight makes placement a meaningful shop decision, and the supplied specifications do not state a lift-height range.

Listed on Amazon as: KATOOL 1500lbs Motorcycle Lift Side Extension Motorcycle Jack Table Pedal Hydraulic Pump Lift Table KT-Moto150

#8

8. VEVOR Motorcycle Lift Table

• Load Capacity: 1000 lb
• Material: Steel : Q235B
• Compatible with Vehicle Type: Motorcycle

Best for: Adjustable motorcycle table users.

Why it ranks #8: The listing mentions ATVs in its title and supports 1,000 pounds, but its stated compatible vehicle type is motorcycle.

A hydraulic foot pedal raises this VEVOR table through an 8.6-to-31-inch height range, providing adjustable elevation for motorcycle maintenance. Its 1,000-pound capacity covers most standard motorcycles, touring bikes, and cruisers, while a leak-proof pump design is specified for the lifting system.

The foot-pedal hydraulic pump raises a motorcycle with less effort and minimal resistance, according to the supplied product details. Its 8.6-to-31-inch range provides several possible working elevations, and the stated 1,000-pound limit covers most standard motorcycles, touring bikes, and cruisers. The product is also described as compatible with ATVs and dirt bikes in its title, but the specifications list motorcycle compatibility, so vehicle fit should be assessed against the stated capacity and application details.

Skip it if you need a 1,500-pound lift for ATV service; the Black Widow BW-1500AO-V2 lists ATV compatibility and a 33.5-inch maximum height.

This suits motorcycle owners seeking a hydraulic table with adjustable height for routine service and repair. Keep loads within 1,000 pounds, and note that the specifications list motorcycle compatibility even though the title also mentions ATVs and dirt bikes.

Listed on Amazon as: VEVOR Motorcycle Lift Table, 1000lbs Weight Capacity, 360° Flexible Moving Motorcycle Jack Stand, 8.6-31 in Height Range, Heavy Duty Bike Repair Stand with Security Lock for ATVs, Dirt Bike

#9

9. Black Widow ProLift Table

• Load Capacity: 1500 lb
• Material: Steel
• Compatible with Vehicle Type: Motorcycle

Best for: Wide-deck cruiser service.

Why it ranks #9: This 1,500-pound pneumatic table has a wide platform, but its stated vehicle compatibility and product description focus on motorcycles.

The 31.25-inch pneumatic lift height raises motorcycles from a 7-inch loading position, giving a mechanic elevated access for service, maintenance, and custom work. Its extra-wide platform is intended for cruisers and V-twins, while the foot pedal provides controlled lifting without repeated hand pumping.

The 1,500-pound capacity and adjustable wheel clamp help support and steady a motorcycle as it is positioned on the table; built-in tie-down points provide places to attach safety straps. The pneumatic foot pedal raises the platform from 7 to 31.25 inches, useful for moving from loading height to a service position. Operation requires 90–110 PSI compressed air, and the compressor is not included, so a suitable air supply is part of the setup.

Skip it if you need an ATV-specific deck; the Black Widow BW-1500AO-V2 lists ATV compatibility and a 33.5-inch lift height.

This suits cruiser and V-twin owners who want a wide service platform and pneumatic lifting for garage maintenance. Check that your motorcycle fits the table and that your workspace has the required compressed-air supply before choosing it.

Listed on Amazon as: Black Widow Motorcycle Lift Table, Pneumatic, 1,500 lb, ProLift, 31.25"

#10

10. VEVOR Motorcycle Scissor Lift

• Load Capacity: 1100 lb
• Material: Steel
• Compatible with Vehicle Type: Cruiser Bikes, Street Bikes, Touring Motorcycles

Best for: Compact motorcycle scissor-jack setup.

Why it ranks #10: It is a 41-pound, 1,100-pound-capacity motorcycle jack; its listed compatible vehicle types do not include ATVs.

A 41-pound scissor jack with a dolly and hand crank offers a compact way to position a motorcycle lift in a garage. The 1,100-pound capacity covers listed street, cruiser, and touring motorcycles, while the wide deck and tool tray support hands-on repair work.

The hand crank raises the motorcycle without extra tools, and the dolly supports moving the jack around the garage. Its wide deck provides the lifting surface, while the tool tray keeps work tools close at hand during a repair. The 1,100-pound capacity is specified for street bikes, cruisers, and touring motorcycles. At 18.1 by 17.3 by 4.9 inches, this scissor jack is a compact lifting format, not a full-length ATV table.

Skip it if you need a 1,500-pound hydraulic jack for ATV use; the VEVOR ZX0901-7B lists that capacity and ATV compatibility.

This suits owners of street, cruiser, or touring motorcycles who want a movable, compact jack with a tool tray. Its 1,100-pound limit and listed motorcycle types make load and vehicle compatibility important boundaries.

Listed on Amazon as: VEVOR Motorcycle Lift 1100lbs ATV Scissor Lift Jack with Dolly & Hand Crank | Garage Repair Center Hoist Crank Stand with Wide Deck and Tool Tray for Street Bikes, Cruiser Bikes, Touring Motorcycles