Best Shocks For Jeep Grand Cherokee: Compare Complete Sets

#1 · Best Overall

1. Bilstein 4600 Set

• Material Type: Metal
• Compatible with Vehicle Type: Car
• Weight: 26.1 lb

Best for: Stock-height monotube upgrade.

Why it ranks #1: This front-and-rear set is a stock-height direct-fit choice, with monotube construction, fade-free performance, and digressive valving.

A monotube design delivers consistent fade-free performance, while vehicle-tuned fitment makes Bilstein's 4600 set a stock-height replacement for listed Grand Cherokee and Commander applications. Its digressive valving reacts to changing road surfaces, supporting comfort and control without changing the vehicle's stock-height setup.

Bilstein describes the 4600 as a direct-fit upgrade to OE shocks on stock-height SUVs and light trucks, making it a fit for owners retaining standard ride height. The monotube construction supports consistent fade-free performance, while velocity-sensitive digressive valving reacts to changing surfaces for comfort and control on and off road. The listed set includes front and rear shocks for 2005–2010 Grand Cherokee and 2006–2010 Commander; it is not a complete coil-spring strut assembly kit.

Skip it if you need front coil-spring assemblies replaced too; Detroit Axle's 6AQS54488 kit includes complete front struts with coil springs.

For a stock-height 2005–2010 Grand Cherokee owner wanting front and rear shocks with monotube damping, this set addresses changing road surfaces and fade. It does not include complete front strut-and-spring assemblies.

Listed on Amazon as: Bilstein 24-186797 24-186803 4600 Series Set of Front & Rear Shocks fits 2006 2010 Jeep Commander & 2005 2010 Grand Cherokee – Monotube Design, Fade Free Performance

#2 · Complete Assembly

2. Complete Struts Assembly Kit

• Material Type: Alloy Steel, Rubber
• Compatible with Vehicle Type: Car
• Weight: 56 lb

Best for: Complete 2005–2010 suspension refresh.

Why it ranks #2: It combines two assembled front struts with coil springs and two rear gas shocks, replacing more components together; diesel models are excluded.

A four-piece set pairs two fully assembled front struts with coil springs and two rear gas shocks, enabling a broad suspension refresh without rebuilding the old front struts. It covers 2005–2010 Jeep Grand Cherokee models, with one important boundary: diesel models are excluded.

Because the front struts arrive assembled with coil springs, this kit avoids the separate task of rebuilding those assemblies; the two rear gas shocks extend the replacement to both ends. The listed application is 2005–2010 Grand Cherokee, excluding diesel versions. Installation planning should account for an alignment afterward, and the supplied product information recommends inspecting control-arm bushings and ball joints for wear that could affect alignment. It is a four-piece suspension set, not a claim of replacing those other components.

Skip it if you have a diesel Grand Cherokee or need only rear shocks; this set includes front assemblies and rear shocks together.

For owners refreshing the front and rear suspension on a listed 2005–2010 non-diesel Grand Cherokee, the assembled fronts simplify the strut-replacement workflow. Plan for an alignment and inspect related suspension components during installation.

Listed on Amazon as: COMPLETESTRUTS – Front Complete Strut Assemblies with Coil Springs and Rear Shock Absorbers Replacement for 2005-2010 Jeep Grand Cherokee – Set of 4

#3 · Broad Kit Coverage

3. KUIPERAUTO Complete Assembly

• Material Type: Metal, Oil
• Compatible with Vehicle Type: Car

Best for: Four-corner complete assemblies.

Why it ranks #3: The four-piece front-and-rear assembly covers Grand Cherokee applications while excluding SRT8, and includes a one-year warranty.

Four complete front and rear assemblies cover both ends of a compatible Grand Cherokee, enabling one coordinated replacement rather than a front-only or rear-only job. KUIPERAUTO lists 2005–2010 Grand Cherokee fitment, but specifically excludes SRT8 models; its application also includes 2006–2010 Jeep Commander.

The four-piece set includes front and rear strut assemblies, so buyers addressing worn components at both ends can source them in one kit. KUIPERAUTO says the shock absorbers reduce body bounce, smooth road bumps, and improve stability and comfort, connecting the replacement to everyday ride behavior. The listed Grand Cherokee range is 2005–2010, except SRT8, and the supplied fitment also names 2006–2010 Commander. Check that exclusion and model-year range before planning installation.

Skip it if you own a Grand Cherokee SRT8; Complete Struts' 4-AABAA-BC9AB0-002 lists 2005–2010 fitment without an SRT8 exclusion.

This kit suits an owner seeking a four-corner assembly replacement on a listed 2005–2010 non-SRT8 Grand Cherokee. Its comfort and stability claims center on reduced bounce and smoother bumps; the SRT8 exclusion is a firm fit boundary.

Listed on Amazon as: KUIPERAUTO Front and Rear Struts Complete Assembly Shocks Absorbers Compatible for 2005-2010 Jeep Grand Cherokee / 2006-2010 Jeep Commander,171377L,171377R,911278 4PCS

#4

4. PM Auto Complete Set

• Weight: 72.6 lb

Best for: Tool-light four-corner replacement.

Why it ranks #4: This set pairs front quick struts with rear complete shocks, avoiding disassembly of the old strut or separate coil-spring compression.

Complete front quick struts and rear shocks make this four-piece set a broad 2011–2015 Grand Cherokee replacement, while the front assemblies avoid taking apart old struts or compressing coil springs. PM Auto also says no specialized tools are needed for installing the complete strut assemblies.

The complete front quick struts include coil springs, so the described installation does not require disassembling the existing strut assembly or compressing its spring. PM Auto says no specialized tools are needed for the complete strut installation, a practical advantage for buyers planning a less involved front-end workflow. The included rear complete shocks extend the set to all four corners, and the listing identifies 2011–2015 Grand Cherokee fitment. Check the vehicle fitment tool before ordering, as directed by the product information.

Skip it if you need parts for a 2016–2020 Grand Cherokee; Detroit Axle 6AQS54488 lists that range with front coil-spring assemblies and rear shocks.

For a 2011–2015 Grand Cherokee owner seeking a four-corner refresh, the assembled fronts reduce disassembly steps and the kit includes rear shocks. Keep its model-year coverage in mind when planning the repair.

Listed on Amazon as: PM Auto Set of 4 Front Quick Strut-Rear Complete Shock Compatible With 2011-2015 Jeep Grand Cherokee

#5 · Links Included

5. Detroit Axle 6-Piece Kit

• Weight: 52 lb

Best for: 2016–2020 front-end refresh kit.

Why it ranks #5: The kit includes complete front struts, rear shocks, and two front stabilizer sway bar end links for a broader suspension replacement.

This six-piece Detroit Axle kit combines complete front struts with coil springs, rear shocks, and front stabilizer sway bar end links, enabling several suspension replacements in one package. Its listed 2016–2020 Grand Cherokee applications exclude self-leveling suspension and specify rear coil springs.

The two complete front struts include coil spring assemblies, so the front units do not require rebuilding the old struts; two rear shocks and two front stabilizer sway bar end links broaden the kit beyond dampers alone. Fitment is listed for 2016–2019 engines including 5.7L, 3.6L, and 3.0L, and for 2020 5.7L and 3.6L. The application excludes self-leveling suspension and specifies rear coil springs, so those configurations matter when selecting the kit.

Skip it if you have self-leveling suspension or a rear setup other than coil springs; Bilstein 24-186797/24-186803 lists stock-height 2005–2010 applications.

This kit fits owners seeking front assemblies, rear shocks, and front end links for a listed 2016–2020 Grand Cherokee. Its key boundary is explicit: the vehicle must not have self-leveling suspension and must use rear coil springs.

Listed on Amazon as: Detroit Axle – 6pc Struts Shocks Kit for 2016-2020 Jeep Grand Cherokee

#6 · Off-Road Tuning

6. Rancho RS5000X Set

• Material Type: Iron Alloy
• Compatible with Vehicle Type: Car
• Weight: 25 lb

Best for: 1999–2004 WJ handling focus.

Why it ranks #6: Its vehicle-tuned progressive engagement valving is designed to reduce low-speed impacts, with a corrosion-resistant nitro-carburized piston rod.

Rancho's Cross Tuned technology combines rebound valving with an advanced compression phase, enabling a handling-focused shock setup for 1999–2004 Jeep Grand Cherokee WJ models. Progressive Engagement Valving is custom-tuned for each vehicle and helps reduce initial low-speed impacts, making ride character a key reason to consider this set.

The rebound valving system and advanced compression phase work together to target handling and performance on-road and off-road, according to Rancho. Progressive Engagement Valving is custom-tuned for the vehicle and addresses initial impacts at low speeds, which is relevant for buyers looking to reduce a rough ride. A 16 mm nitro-carburized piston rod is specified to resist scuffs and corrosion. The listing identifies 2WD and 4WD WJ fitment for 1999–2004 Grand Cherokee.

Skip it if you have a 2005-or-newer Grand Cherokee; Bilstein 24-186797/24-186803 lists 2005–2010 Grand Cherokee applications.

A WJ owner seeking vehicle-tuned damping for on- and off-road handling may value Rancho's paired valving technologies. Keep the application boundary in view: this set is listed for 1999–2004 Grand Cherokee 2WD and 4WD models.

Listed on Amazon as: Rancho RS5000X Gas Shocks Set compatible with 1999-2004 Jeep Grand Cherokee 2WD 4WD WJ

#7

7. ECCPP Front and Rear Shocks

• Material Type: Steel
• Compatible with Vehicle Type: Car
• Weight: 17.2 lb

Best for: Four shocks for 1999–2004 models.

Why it ranks #7: This four-shock set covers older Grand Cherokee applications and uses steel construction with a chrome or zinc coating.

Four gas shock absorbers cover the front and rear of a 1999–2004 Jeep Grand Cherokee, enabling a four-corner shock replacement without supplying new coil springs or strut mounts. ECCPP lists steel construction with a chrome or zinc coating and oil described as Japanese-made.

The set includes four front and rear shocks, giving owners replacing dampers at both ends a single package. ECCPP states that the shocks use strong, thick steel with a chrome or zinc coating and Japanese-made oil; the listing also says they meet or exceed OE specifications in form, fit, and function. However, the package explicitly excludes strut mounts, coil springs, and rubber buffers, so those components remain separate parts of the repair plan for the listed 1999–2004 Grand Cherokee.

Skip it if you need assembled front struts with springs; Rancho RS5000X RS55826 targets 1999–2004 WJ models with vehicle-tuned valving.

Consider this set for a 1999–2004 Grand Cherokee owner replacing shocks at all four corners while retaining separate mounts and springs. It is a damper set, so it does not supply those additional strut components.

Listed on Amazon as: Grand Cherokee Shocks,ECCPP 4x Front Rear Shocks Absorbers for Jeep Fits 1999 2000 2001 2002 2003 2004 for Jeep Grand Cherokee 344342 344341 Auto Shocks Gas Struts Sets (Set of 4 Front and Rear)

#8

8. Monroe Load Adjusting Shocks

• Material Type: Polytetrafluoroethylene
• Compatible with Vehicle Type: Car, Truck
• Weight: 1000 g

Best for: Tow and variable-load support.

Why it ranks #8: Its pair uses a heavy-gauge calibrated spring to respond to road and weight conditions, making it relevant to towing or varying loads.

A heavy-gauge calibrated spring adjusts to road and weight conditions, helping this Monroe load-adjusting shock assembly provide extra control when towing or carrying changing loads. Its listed applications include 2006–2010 Grand Cherokee models and a 2005 Grand Cherokee; verify the vehicle details before purchase.

The calibrated spring responds to changing load and road conditions, which makes this assembly relevant to a Grand Cherokee that alternates between everyday driving and carrying or towing weight. Monroe specifically describes reduced sag under load and extra control in more demanding operating conditions. The pack is listed as two assemblies and includes a dust shield. Fitment spans several model-year entries, so check the vehicle year, engine, and trim against the supplied compatibility guidance before ordering.

Skip it if you need all four corners replaced together; Complete Struts' 4-AABAA-BC9AB0-002 set includes front struts and rear shocks.

Choose this pair for a listed Grand Cherokee used to tow or carry varying loads, where the calibrated spring's load response matters. It is not a four-corner kit, and the vehicle's year and trim require a careful fitment check.

Listed on Amazon as: Monroe Load Adjusting 58646 Suspension Shock Absorber and Coil Spring Assembly Pack of 2 for Jeep Grand Cherokee

#9

9. PM Auto Rear Shock Kit

• Material Type: Metal
• Compatible with Vehicle Type: Car
• Weight: 18.2 lb

Best for: Rear pair for Sport or Eco suspension.

Why it ranks #9: This two-shock rear kit has specific sport or Eco suspension applications and excludes air, electronic, and load-leveling suspension.

A pair of complete rear shock absorbers targets the back end of specified 2011–2021 Grand Cherokee configurations, enabling a focused rear replacement rather than buying front suspension parts. PM Auto lists Sport suspension for 2011–2015 and Eco suspension for 2016–2021, with several exclusions.

The two-piece kit is specifically for the rear, which suits an owner addressing rear shocks while leaving the front suspension untouched. For 2011–2015 Grand Cherokee, the listing specifies Sport suspension and excludes air, electronic, and load-leveling suspension. For 2016–2021, it specifies Eco suspension and repeats those exclusions. PM Auto also describes an OE-grade seal intended to support dependable performance under temperature extremes. These suspension-type boundaries are central to choosing this pair.

Skip it if you need a full four-corner kit; PM Auto AD405983 lists front quick struts and rear shocks for 2011–2015 Grand Cherokee.

Choose this pair when replacing the rear shocks on a listed Sport- or Eco-suspension Grand Cherokee from the specified years. It is not a full-vehicle kit, and air, electronic, and load-leveling setups are excluded.

Listed on Amazon as: PM Auto Pair of 2 Rear Complete Shock Absorber kit Compatible With 2011-2021 Jeep Grand Cherokee w/Sport or Eco Suspension

#10

10. Chonse Front Struts

• Material Type: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: Front assemblies for listed trims.

Why it ranks #10: These are front-only strut and coil-spring assemblies, and the listed vehicle fitment is limited to specified trims, engines, and drivetrains.

A pair of front shock strut and coil spring assemblies replaces the front units together, enabling a front-end refresh without sourcing those two components separately. Chonse lists select 2011–2015 Grand Cherokee trims and drivetrain combinations, plus certain Dodge Durango applications, rather than every Grand Cherokee configuration.

The two front assemblies combine the shock struts and coil springs, giving buyers a paired front replacement rather than a shock-only set. Chonse lists alloy steel construction and applications by trim, engine, drivetrain, and year: examples include 2011–2015 Laredo and Limited V6 AWD, and selected Limited, Overland, and V8 RWD configurations. Because the fitment entries are specific, match the vehicle's configuration to the listed application. The kit covers the front, not a full-vehicle suspension refresh.

Skip it if you want front and rear parts together; PM Auto AD405983 lists a four-piece front quick-strut and rear-shock set for 2011–2015 Grand Cherokee.

This pair suits an owner replacing front struts and springs on a specifically listed 2011–2015 Grand Cherokee configuration. It does not cover the rear, and the detailed trim and drivetrain boundaries matter for fit selection.

Listed on Amazon as: 2PCs Front Shock Strut & Coil Spring Assembly Compatible with Jeep Grand Cherokee 2011-2015 & Dodge Durango 2011-2013 (Front Struts)